Powerbook G4 lubuntu 14.04LTS 连接问题

Powerbook G4 lubuntu 14.04LTS 连接问题

好的,我搜索了各种留言板,但没有成功解决这个问题。

我有一台旧的 PowerBook G4,但无线功能出现了问题。

该卡处于活动状态,我可以在网络管理器中看到无线网络,但是当我尝试连接时,它只是反复询问我网络密码,而我知道这是正确的。

到目前为止,我还没有找到明确的解决方案。有什么想法吗?

以下是无线信息脚本的输出

########## wireless info START ##########

Report from: 24 Oct 2017 13:29 EDT -0400

Booted last: 24 Oct 2017 11:41 EDT -0400

Script from: 25 Mar 2017 07:04 UTC +0000

##### release ###########################

Distributor ID: Ubuntu
Description:    Ubuntu 14.04.5 LTS
Release:    14.04
Codename:   trusty

##### kernel ############################

Linux 4.4.0-97-powerpc-smp #120~14.04.1-Ubuntu SMP Wed Sep 20 15:54:00 UTC 2017 ppc ppc ppc GNU/Linux

, ro, quiet, splash, radeon.agpmode=-1, 

##### desktop ###########################

Lubuntu

##### lspci #############################

0001:24:0f.0 Ethernet controller [0200]: Apple Inc. UniNorth GMAC (Sun GEM) [106b:0021] (rev 01)
    Kernel driver in use: gem

ff08:00:0b.0 Host bridge [0600]: Apple Inc. UniNorth 1.5 AGP [106b:002d]

##### lsusb #############################

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

##### PCMCIA card info ##################

PRODID_1=""
PRODID_2=""
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCID=255

##### rfkill ############################

0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no

##### lsmod #############################

airport                 3709  0 
orinoco                73480  1 airport
cfg80211              499172  1 orinoco

##### interfaces ########################

auto lo
iface lo inet loopback
auto eth2
iface eth2 inet dhcp
wpa-essid JSNET
wpa-psk <WPA key removed>

##### ifconfig ##########################

eth0      Link encap:Ethernet  HWaddr <MAC 'eth0' [IF1]>  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

eth1      Link encap:Ethernet  HWaddr <MAC 'eth1' [IF2]>  
          inet addr:192.168.1.14  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::<IP6 'eth1' [IF2]>/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:24034 errors:6 dropped:1 overruns:0 frame:6
          TX packets:21838 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:17031980 (17.0 MB)  TX bytes:2598946 (2.5 MB)

eth2      Link encap:Ethernet  HWaddr <MAC 'eth2' [IF3]>  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:57 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:462 errors:0 dropped:0 overruns:0 frame:0
          TX packets:462 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1 
          RX bytes:35977 (35.9 KB)  TX bytes:35977 (35.9 KB)

##### iwconfig ##########################

lo        no wireless extensions.

eth1      no wireless extensions.

eth0      no wireless extensions.

eth2      IEEE 802.11b  ESSID:""  
          Mode:Managed  Frequency:2.422 GHz  Access Point: None   
          Bit Rate:11 Mb/s   Sensitivity:1/0  
          Retry short  long limit:8   RTS thr=2347 B   Fragment thr:off
          Power Management:off
          Link Quality=0/70  Signal level=-122 dBm  Noise level=-122 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:44
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

##### route #############################

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.1.1     0.0.0.0         UG    0      0        0 eth1
192.168.1.0     0.0.0.0         255.255.255.0   U     1      0        0 eth1

##### resolv.conf #######################

nameserver 192.168.1.1
nameserver 127.0.1.1

##### network managers ##################

Installed:

    NetworkManager
    Wicd

Running:

root      2804     1  0 11:54 ?        00:00:04 NetworkManager

##### NetworkManager info ###############

NetworkManager Tool

State: connected (global)

- Device: eth1  [Wired connection 1] -------------------------------------------
  Type:              Wired
  Driver:            ax88179_178a
  State:             connected
  Default:           yes
  HW Address:        <MAC 'eth1' [IF2]>

  Capabilities:
    Carrier Detect:  yes
    Speed:           100 Mb/s

  Wired Properties
    Carrier:         on

  IPv4 Settings:
    Address:         192.168.1.14
    Prefix:          24 (255.255.255.0)
    Gateway:         192.168.1.1

    DNS:             192.168.1.1

- Device: eth0 -----------------------------------------------------------------
  Type:              Wired
  Driver:            gem
  State:             unavailable
  Default:           no
  HW Address:        <MAC 'eth0' [IF1]>

  Capabilities:
    Carrier Detect:  yes

  Wired Properties
    Carrier:         off

- Device: eth2 -----------------------------------------------------------------
  Type:              802.11 WiFi
  Driver:            airport
  State:             disconnected
  Default:           no
  HW Address:        <MAC 'eth2' [IF3]>

  Capabilities:

  Wireless Properties
    WEP Encryption:  yes
    WPA Encryption:  yes

  Wireless Access Points 
    The Smokehouse:  Infra, <MAC 'The Smokehouse' [AN1]>, Freq 2437 MHz, Rate 54 Mb/s, Strength 29 WPA2
    JSNET:           Infra, <MAC 'JSNET' [AC1]>, Freq 2462 MHz, Rate 54 Mb/s, Strength 69 WPA WPA2
    DIRECT-6C-HP OfficeJet 3830: Infra, <MAC 'DIRECT-6C-HP OfficeJet 3830' [AN3]>, Freq 2462 MHz, Rate 54 Mb/s, Strength 9 WPA2
    PRPTCO:          Infra, <MAC 'PRPTCO' [AN4]>, Freq 2437 MHz, Rate 54 Mb/s, Strength 25 WPA2
    xfinitywifi:     Infra, <MAC 'xfinitywifi' [AN5]>, Freq 2437 MHz, Rate 54 Mb/s, Strength 27
    LatoyaNet:       Infra, <MAC 'LatoyaNet' [AN6]>, Freq 2412 MHz, Rate 54 Mb/s, Strength 15 WPA WPA2

##### NetworkManager.state ##############

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
WimaxEnabled=true

##### NetworkManager.conf ###############

[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq

[ifupdown]
managed=true

##### NetworkManager profiles ###########

[[/etc/NetworkManager/system-connections/JSNET]] (600 root)
[connection] id=JSNET | type=802-11-wireless
[802-11-wireless] ssid=JSNET | mac-address=<MAC 'eth2' [IF3]>
[ipv4] method=auto
[ipv6] method=auto

[[/etc/NetworkManager/system-connections/Wi-Fi connection 1]] (600 root)
[connection] id=Wi-Fi connection 1 | type=802-11-wireless
[802-11-wireless] ssid=JSNET
[ipv6] method=auto
[ipv4] method=auto

##### iw reg get ########################

Region: America/New_York (based on set time zone)

country 00:
    (2402 - 2472 @ 40), (3, 20)
    (2457 - 2482 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
    (2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS
    (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
    (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS

##### iwlist channels ###################

lo        no frequency information.

eth1      no frequency information.

eth0      no frequency information.

eth2      11 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Current Frequency:2.422 GHz (Channel 3)

##### iwlist scan #######################

lo        Interface doesn't support scanning.

eth1      Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

Channel occupancy:

      1   APs on   Frequency:2.462 GHz (Channel 11)

eth2      Scan completed :
          Cell 01 - Address: <MAC 'JSNET' [AC1]>
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=61/70  Signal level=-49 dBm  
                    Encryption key:on
                    ESSID:"JSNET"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=00000000ec1fa370
                    Extra: Last beacon: 164ms ago
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK

##### module infos ######################

[airport]
filename:       /lib/modules/4.4.0-97-powerpc-smp/kernel/drivers/net/wireless/orinoco/airport.ko
license:        Dual MPL/GPL
description:    Driver for the Apple Airport wireless card.
author:         Benjamin Herrenschmidt <[email protected]>
srcversion:     21052957383B9E0FA798721
depends:        orinoco
intree:         Y
vermagic:       4.4.0-97-powerpc-smp SMP mod_unload modversions 

[cfg80211]
filename:       /lib/modules/4.4.0-97-powerpc-smp/kernel/net/wireless/cfg80211.ko
description:    wireless configuration support
license:        GPL
author:         Johannes Berg
srcversion:     4B104D07EC5684C9E39533C
depends:        
intree:         Y
vermagic:       4.4.0-97-powerpc-smp SMP mod_unload modversions 
parm:           bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)

##### module parameters #################

[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00

##### /etc/modules ######################

airport
apm_emu
snd-powermac

##### modprobe options ##################

[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci

[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac

[/etc/modprobe.d/blacklist.local.conf]
blacklist snd-aoa-codec-tas
blacklist snd-aoa-fabric-layout
blacklist snd-aoa-i2sbus
blacklist snd-aoa-soundbus
blacklist snd-aoa

[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off

[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211

[/etc/modprobe.d/mlx4.conf]
softdep mlx4_core post: mlx4_en

##### rc.local ##########################

exit 0

##### pm-utils ##########################

##### udev rules ########################

[/etc/udev/rules.d/70-persistent-net.rules]
# PCI device 0x106b:0x0021 (gem)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'eth0' [IF1]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# USB device 0x:0x (ax88179_178a)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'eth1' [IF2]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
# PCI device 0x106b:0x0022 (airport)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'eth2' [IF3]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"

##### dmesg #############################

[   46.755846] eth2: Lucent/Agere firmware doesn't support manual roaming (repeated 6 times)
[  170.574540] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[  170.781065] eth2: Lucent/Agere firmware doesn't support manual roaming
[  172.315356] ax88179_178a 1-1:1.0 eth1: ax88179 - Link status is: 1 (repeated 2 times)
[  172.364473] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  173.097636] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[  183.960530] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[  183.963247] ax88179_178a 1-1:1.0 eth1: ax88179 - Link status is: 1
[  184.688464] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[  186.587203] ax88179_178a 1-1:1.0 eth1: ax88179 - Link status is: 1 (repeated 2 times)
[  186.636310] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  347.647533] gem 0001:24:0f.0 eth0: Found BCM5421 PHY
[  347.648021] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  943.581125] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[  944.025669] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[  944.052979] ax88179_178a 1-1:1.0 eth1: ax88179 - Link status is: 1
[  944.149675] gem 0001:24:0f.0 eth0: Found BCM5421 PHY
[  944.150172] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  945.682478] ax88179_178a 1-1:1.0 eth1: ax88179 - Link status is: 1 (repeated 2 times)
[  945.731632] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  946.997214] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready (repeated 2 times)
[  948.997618] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[  949.010439] ax88179_178a 1-1:1.0 eth1: ax88179 - Link status is: 1
[  950.425613] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[  951.680984] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[  952.114401] ax88179_178a 1-1:1.0 eth1: ax88179 - Link status is: 1 (repeated 2 times)
[  952.163568] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  952.229156] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[  953.701565] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[  953.714386] ax88179_178a 1-1:1.0 eth1: ax88179 - Link status is: 1 (repeated 3 times)
[  955.493509] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  956.465192] eth2: Lucent/Agere firmware doesn't support manual roaming (repeated 5 times)
[ 1099.703614] ax88179_178a 1-1:1.0 eth1: unregister 'ax88179_178a' usb-0000:10:18.0-1, ASIX AX88179 USB 3.0 Gigabit Ethernet
[ 1099.703672] ax88179_178a 1-1:1.0 eth1: Failed to read reg index 0x0002: -19
[ 1099.703687] ax88179_178a 1-1:1.0 eth1: Failed to write reg index 0x0002: -19
[ 1099.725330] ax88179_178a 1-1:1.0 eth1 (unregistered): Failed to write reg index 0x0002: -19
[ 1099.725354] ax88179_178a 1-1:1.0 eth1 (unregistered): Failed to write reg index 0x0001: -19
[ 1099.725367] ax88179_178a 1-1:1.0 eth1 (unregistered): Failed to write reg index 0x0002: -19
[ 1100.650450] ax88179_178a 1-1:1.0 eth1: register 'ax88179_178a' at usb-0000:10:18.0-1, ASIX AX88179 USB 3.0 Gigabit Ethernet, <MAC 'eth1' [IF2]>
[ 1101.213773] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 1102.864570] ax88179_178a 1-1:1.0 eth1: ax88179 - Link status is: 1 (repeated 2 times)
[ 1102.913922] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 2300.141473] eth2: Lucent/Agere firmware doesn't support manual roaming (repeated 10 times)

########## wireless info END ############

iw list | grep -A7 密码 支持的密码: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) 可用天线: TX 0 RX 0 支持的接口模式: * IBSS * managed

相关内容