我最近买了一台 TP-Link Archer T6E。lspci命令无法检测到它。我发现本网站使用的芯片组是“Broadcom BCM4352”，但文档中或 TP-Link 产品的网站上没有提及 Broadcom。
我尝试按照以下说明安装 broadcom-wl这个 Github 页面但我没有结果。
结果如下lspci：
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c4)
00:1c.6 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 (rev c4)
00:1c.7 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller (rev 04)
00:1f.2 IDE interface: Intel Corporation 7 Series/C210 Series Chipset Family 4-port SATA Controller [IDE mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04)
00:1f.5 IDE interface: Intel Corporation 7 Series/C210 Series Chipset Family 2-port SATA Controller [IDE mode] (rev 04)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde XT [Radeon HD 7770/8760 / R7 250X]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000 Series]
02:00.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 41)
04:00.0 Ethernet controller: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet (rev c0)
05:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
我的/etc/modprobe.d/blacklist.conf文件：
# This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.
# evbug is a debug tool that should be loaded explicitly
blacklist evbug
# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd
# replaced by e100
blacklist eepro100
# replaced by tulip
blacklist de4x5
# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394
# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m
# Conflicts with dvb driver (which is better for handling this device)
blacklist snd_aw2
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps
# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi
# low-quality, just noise when being used for sound playback, causes
# hangs at desktop session start (Ubuntu: #246969)
blacklist snd_pcsp
# ugly and loud noise, getting on everyone's nerves; this should be done by a
# nice pulseaudio bing (Ubuntu: #77010)
blacklist pcspkr
# EDAC driver for amd76x clashes with the agp driver preventing the aperture
# from being initialised (Ubuntu: #297750). Blacklist so that the driver
# continues to build and is installable for the few cases where its
# really needed.
blacklist amd76x_edac
# wireless drivers (conflict with Broadcom hybrid wireless driver 'wl')
blacklist ssb
blacklist bcma
blacklist b43
blacklist brcmsmac
sudo lshw -C network没有提供有关该设备的任何信息：
*-network
description: Ethernet interface
product: AR8151 v2.0 Gigabit Ethernet
vendor: Qualcomm Atheros
physical id: 0
bus info: pci@0000:04:00.0
logical name: enp4s0
version: c0
serial: 90:2b:34:39:b4:1d
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair
resources: irq:30 memory:f7d00000-f7d3ffff ioport:d000(size=128)
*-network:0
description: Ethernet interface
physical id: 2
logical name: br-0fa1bcff4c11
serial: 02:42:0d:8a:b2:29
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A ip=172.18.0.1 link=no multicast=yes
*-network:1
description: Ethernet interface
physical id: 3
logical name: docker0
serial: 02:42:7d:e2:c5:01
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A ip=172.17.0.1 link=no multicast=yes
*-network:2
description: Ethernet interface
physical id: 4
logical name: br-5490f8a7b402
serial: 02:42:9e:dd:1a:9f
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A ip=172.24.0.1 link=no multicast=yes
*-network:3
description: Ethernet interface
physical id: 5
logical name: enp0s20u1
serial: 96:95:8a:2e:36:0b
capabilities: ethernet physical
configuration: broadcast=yes driver=rndis_host driverversion=22-Aug-2005 firmware=RNDIS device ip=192.168.42.42 link=yes multicast=yes
没有任何dmsg关于此的内容。我已经看到有关 broadcom 驱动程序的其他问题，但在其他情况下，驱动程序由 lspci 检测到。
没有提到对 Ubuntu 的支持，但我认为这应该是正确的，因为芯片组似乎受支持。我错了？我该怎么办？
答案1
你见过吗Broadcom BCM4352 无线无法与 16.10 配合使用？
Broadcom 是一个 PITA（参见城市词典)，因为他们没有提供任何有关硬件的信息。我遇到过很多与他们的硬件有关的问题（在 Linux 上）如果没有驱动程序，系统可能无法识别它。
让它运行的唯一方法是安装正确的（非开放）驱动程序。
但其他人也有同样的问题，并得到了回答这里。他们似乎通过使用 Ubuntu 中的“附加驱动程序”软件解决了这个问题。要使此功能正常工作，您的机器需要在线（例如，使用临时以太网连接）。在使用驱动程序之前，请务必重新启动机器...
答案2
最终的解决方案是更换 PCI 插槽。我尝试了两个插槽，但不起作用。我换了第三个插槽，然后就好了。