☰

如何安装 Logitech Media Server（Squeezebox Server）？

tag-icon • tag-icon software-installation logitech mediaserver squeezebox
如何安装 Logitech Media Server（Squeezebox Server）？

我可以在哪里获得 Logitech Media Server 的最新安装文件以及如何正确安装？

（我在 Raspberry Pi 2 上运行它，由于 SD 卡故障，我不得不重新安装它几次。所以我回答这个问题主要是为了提醒自己。）

答案1

撰写本文时最新版本是 7.9.2。

可用这里。您可以找到其他几个版本的概述这里.link根据您的系统将文件复制到剪贴板。

使用 将文件下载到您的系统wget link。使用 安装file。sudo dpkg -i file这将安装失败由于缺少依赖项。

用 修复它sudo apt -f install。

从 开始sudo service logitechmediaserver start。

检查是否正在运行top。

通过 提供的 Web-GUI 连接到服务器http://IPofYOURserver:9000。

设置在/var/lib/squeezeboxserver/prefs/server.prefs。

这包括媒体库的目录，也包括本地客户端的设置，例如旧 Squeezebox Boom 显示屏上显示的信息的大小。

如果您不想设置所有新内容，您可以覆盖server.prefs。要做到这一点，您必须sudo systemctl stop logitechmediaserver。

然后复制文件并sudo chown squeezeboxserver:nogroup /var/lib/squeezeboxserver/prefs/server.prefs。

最后，sudo systemctl start logitechmediaserver。

更新：可能需要将用户squeezeboxserver添加到组users。此外，播放列表的位置应该是chmod 775。

如果你使用防火墙来ufw处理端口被解释这里。

其他文件可以在这里找到：http://wiki.slimdevices.com/index.php/Logitech_Media_Server_file_locations#Ubuntu_.3E12.04

答案2

我升级到了 Ubuntu 20.04，这破坏了我的安装，但我找到了如何让它再次工作的方法：

经过一番考虑，我决定重新安装。所以我删除了 /var/lib/squeezeboxserver/ 中的旧内容

然后我从以下地址获取了版本 8.0 (beta) 的全新 deb 包：http://downloads.slimdevices.com/nightly/?ver=8.0

我个人使用的是大多数平台的版本，但根据平台只需选择合适的 deb：

wget http://downloads.slimdevices.com/nightly/8.0/lms/cf7bcdb87b4f8bf6f71f5b5444c923afae4c300d/logitechmediaserver_8.0.0~1589180193_all.deb

使用以下命令安装：dpkg -i logitechmediaserver_8.0.0_1588799628_all.deb

由于我也尝试了旧版本，甚至尝试了 git checkout，我希望我没有遗漏其他脚本已经为我完成的细节而没有注意到。

如果 dpkg 安装尚未添加用户和组，请这样做：

adduser squeezeboxserver
usermod -a -G squeezeboxserver squeezeboxserver

为 pid 文件创建目录：

mkdir /var/run/logitechmediaserver

并将其提供给该用户和组：

chown squeezeboxserver:squeezeboxserver /var/run/logitechmediaserver

/var/lib/squeezeboxserver/ 中的内容也是如此

chown squeezeboxserver:squeezeboxserver /var/lib/squeezeboxserver
chown -R squeezeboxserver:squeezeboxserver /var/lib/squeezeboxserver/*

问题出在 /etc/init.d 中的启动脚本上。它根本不起作用，因为 Ubuntu 20.04 不再有 start-stop-daemon。它只是链接到 /bin/true，这可能对某些脚本有效，但对 logitechmediaserver 无效。我尝试用 C 实现这个程序，但它有铰链，所以我放弃了 start-stop-daemon 并相应地修改了启动程序。

只需存储旧的启动脚本（只是为了保存）并将此内容复制到您选择的编辑器中：

#!/bin/sh
#
# $Id$
#
# logitechmediaserver   initscript for slimserver.pl
#           This file should be placed in /etc/init.d.
#
# Original Author: Mattias Holmlund
#
# Updated By: Dan Sully, Michael Herger, Alexander Hartmann

#
### BEGIN INIT INFO
# Provides:             logitechmediaserver
# Required-Start:       $all
# Required-Stop:        $all
# Should-Start:         $all
# Should-Stop:          $all
# Default-Start:        2 3 4 5
# Default-Stop:         0 1 6
# Short-Description:    Startup script for the Logitech Media Server
# Description:      Logitech Media Server powers the Squeezebox, Transporter and SLIMP3 network music \
#           players and is the best software to stream your music to any software MP3 \
#           player. It supports MP3, AAC, WMA, FLAC, Ogg Vorbis, WAV and more! \
#           As of version 7.7 it also supports UPnP clients, serving pictures and movies too!"
### END INIT INFO
#
# -e  Exit immediately if a command exits with a non-zero status.
set -e

# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
# and status_of_proc is working.
. /lib/lsb/init-functions


### About logitechmediaserver
# The logitechmediaserver is kind of special. It uses the
# squeezeboxserver_safe script, to restart any died squeezeboxserver. This
# can easily happen, for example if you use a MySQL server. Depending on unix
# flavour you are running they sometimes do a regular restart. That would
# cause the squeezeboxserver to terminate. Because of that the 
# squeezeboxserver_safe starts a logitechmediaserver every few seconds, which
# gets shut down again if any other logitechmediaserver is still running.
#
# Sadly this procedure messes up, the process id file. You would get a new id
# file, every time a new server process gets started. That process will
# terminate but the process id of the first server process is lost. So the
# killing the squeezeboxserver have to be done with analysing the process
# table.
#
# As I upgraded to Ubuntu 20.04 my logitechmediaserver stopped working.
# Installing the lastest 8.0 version was no problem downloading the deb-packet
# and installing with dpkg. But the server did not start. I could start it
# manually but the startup script was not able to start it. After some looking
# around I found this:
#
#           /sbin/start-stop-daemon -> /bin/true
#
# This explains why the start up script is not working. There is no package
# in the ubuntu package repository for the start-stop-daemon.
#
# First I tried the C implementation of start-stop-daemon from Dale O'Brien on
# github (https://github.com/daleobrien/start-stop-daemon). It does not
# implement the --remove-pidfile option the original script. But more 
# problematic it threw the error not able to terminate the server while
# doing it without a problem.
#
# I had to compile the C implementation from Dale O'Brien myself, which
# worked without a hitch. Considering the limiations of the implementation
# I came to the conclusion to ditch the start-stop-daemon completly and 
# doing it the old school way.


PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DESC="Logitech Media Server"
NAME=squeezeboxserver
NEWNAME=logitechmediaserver
DAEMON=/usr/sbin/$NAME
DAEMON_RESTARTER=/usr/sbin/${NAME}_safe
PIDFILE=/var/run/$NEWNAME/${NEWNAME}.pid
SCRIPTNAME=/etc/init.d/$NEWNAME
SLIMUSER=$NAME
SLIGROUP=$NAME
PREFSDIR=/var/lib/$NAME/prefs
LOGDIR=/var/log/$NAME/
CACHEDIR=/var/lib/$NAME/cache
CHARSET=utf8
SLEEPTIMER=1

## if you want to add additional options
## use /usr/sbin/squeezeboxserver --help 
## for the supported options and place them
## into the configfile  /etc/default/logitechmediaserver


# Read config file if it is present.
if [ -r /etc/default/$NEWNAME ]; then
    . /etc/default/$NEWNAME
elif [ -r /etc/default/$NAME ]; then
    . /etc/default/$NAME
fi

#
#   Function that starts the daemon/service.
#
d_start() {
        # Where is your su installed?
        SU_BIN=$(command -v su)

        # Use squeezeboxserver_safe to restart the daemon when
        # it dies. This must be done to handle mysql restarts.

        $SU_BIN - $SLIMUSER \
          -s /bin/sh \
          -c "$DAEMON_RESTARTER \
                $DAEMON \
                  --user $SLIMUSER \
                  --group $SLIGROUP \
                  --prefsdir $PREFSDIR \
                  --logdir $LOGDIR \
                  --cachedir $CACHEDIR \
                  --charset=$CHARSET \
                  --daemon \
                  $SLIMOPTIONS \
              > /dev/null 2>&1 &"


        # Writing the pid for the restarter          
        PID=$(ps ax | \
          grep "$DAEMON_RESTARTER $DAEMON" | \
          grep -v grep | \
          head -1 | \
          awk '{print $1}' )

        if [ $PID ]
        then
          if [ $PID -gt 0 ]
          then
            echo -n "  Started the restarter with the process id: "
            echo $PID

            if [ -e $PIDFILE ]
            then
              rm $PIDFILE
            fi

            echo -n $PID > $PIDFILE
          fi
        else
            echo "  ERROR: No process id for the restarter could be found!"
        fi


        # Check if the server is successfully started        
        PERL_BIN=$(command -v perl)

        PID_SERVER=$(ps ax | \
          grep "$PERL_BIN $DAEMON" | \
          grep -v grep | \
          head -1 | \
          awk '{print $1}' )

        if [ $PID_SERVER ]
        then
          if [ $PID_SERVER -gt 0 ]
          then
            echo "  Started the server successfully."
          else
            echo "  ERROR: No process id for the server could be found!"        
          fi
        fi
}


#   Function that stops the daemon/service.
#
d_stop() {
    echo -n "  Checking if the restarter is still running: "

    ## This will kill the squeezeboxserver_safe script. So we don't have
    ## to bother about it, starting new processes.

    PID1=$(ps ax | \
      grep "$DAEMON_RESTARTER $DAEMON" | \
      grep -v grep | \
      head -1 | \
      awk '{print $1}' )


    if [ $PID1 ]
    then
      echo positive
      if [ $PID1 -gt 0 ]
      then
        echo -n "  Stopping now restarter: "

        kill $PID1

            if [ -e $PIDFILE ]
            then
              rm $PIDFILE
        fi

        echo done.
      fi
    else
            echo negative
        fi

    ## We have to kill at least one server process. Possible two processes
    ## and in weird cases  under real high load even three processess.
    ## So a loop it is.
    ## We have to wait for at least one second for closing the process
    ## and analyzing the process list again.

        echo -n "  Checking if any server instances are running: "

    PERL_BIN=$(command -v perl)

        PID2=$(ps ax | \
          grep "$PERL_BIN $DAEMON" | \
          grep -v grep | \
          head -1 | \
          awk '{print $1}' )

        if [ $PID2 ]
        then
          echo positive
          echo -n "  Stopping now all server instances: "
          if [ $PID2 -gt 0 ]
          then
            while [ $(ps ax | \
              grep "$PERL_BIN $DAEMON" | \
              grep -v grep | \
              head -1 | \
              awk '{print $1}') ]
            do
          kill $(ps ax | \
                grep "$PERL_BIN $DAEMON" | \
                grep -v grep | \
                head -1 | \
                awk '{print $1}')
              sleep $SLEEPTIMER
            done
            echo done
          fi
        else
          echo negative
        fi
}

#
#   Function that sends a SIGHUP to the daemon/service.
#
d_reload() {
    start-stop-daemon --stop --quiet --pidfile $PIDFILE --signal 1
}

case "$1" in
  start)
    echo "Making sure that $DESC is not running: "
    d_stop
    echo "Starting $DESC:"
    d_start
    ;;
  stop)
    echo "Stopping $DESC:"
    d_stop
    ;;
  restart|force-reload)
    #
    #   If the "reload" option is implemented, move the "force-reload"
    #   option to the "reload" entry above. If not, "force-reload" is
    #   just the same as "restart".
    #
    echo "Restarting $NAME."
    d_stop
    d_start
    ;;
  status)  
    status_of_proc /usr/bin/$NEWNAME $NEWNAME
    ;;
  *)
    echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload|status}" >&2
    exit 1
    ;;
esac

exit 0

是的，它并不漂亮，但它对我来说很有用，希望也能帮到你。你必须将它放在 /etc/init.d 中，名称为 logitechmediaserver

之后，您必须运行以下命令才能使 systemctl 正常运行：

systemctl daemon-reload

只需启动并进行测试运行即可：

/etc/init.d/logitechmediaserver start

你应该能够使用你的网络浏览器登录http://你的服务器IP:9000/并进行配置。

并测试它是否再次关闭：

/etc/init.d/logitechmediaserver stop

当一切顺利时，启用该服务：

systemctl enable logitechmediaserver.service

相关内容