没有 HDMI 输出 Nvidia 331 驱动程序

没有 HDMI 输出 Nvidia 331 驱动程序

我一直在努力尝试从我的 14.04 系统获得双外接显示器输出。一个显示器是 VGA,另一个是 HDMI。具体来说,我没有收到 HDMI 视频信号,但 Ubuntu 知道我连接了一台显示器。

我已经安装了 Nvidia 专有的 331 驱动程序,但仍然没有输出。我现在认为这与我的 Xrandr 配置有关

输出自xrandr

Screen 0: minimum 8 x 8, current 3520 x 1080, maximum 8192 x 8192
LVDS-0 disconnected primary (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
LVDS1 connected 1600x900+1920+0 (normal left inverted right x axis y axis) 382mm x 215mm
   1600x900       60.1*+
   1440x900       59.9  
   1360x768       59.8     60.0  
   1152x864       60.0  
   1024x768       60.0  
   800x600        60.3     56.2  
   640x480        59.9  
VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1920x1080      60.0* 
   1024x768       60.0  
   800x600        60.3     56.2  
   848x480        60.0  
   640x480        59.9  
   1400x900_60.00   60.0  
   1920x1080_60.00   60.0  
HDMI1 connected (normal left inverted right x axis y axis)
   1920x1080      60.0 +   50.0     59.9  
   1920x1080i     60.1     50.0     60.0  
   1600x1200      60.0  
   1680x1050      59.9  
   1400x1050      59.9  
   1280x1024      75.0     60.0  
   1440x900       59.9  
   1280x960       60.0  
   1152x864       75.0  
   1280x720       60.0     50.0     59.9  
   1440x576       50.0  
   1440x576i      50.1  
   1024x768       75.1     70.1     60.0  
   1440x480       60.0     59.9  
   1440x480i      60.1     60.1  
   832x624        74.6  
   800x600        72.2     75.0     60.3     56.2  
   720x576        50.0  
   720x480        60.0     59.9  
   640x480        75.0     72.8     66.7     60.0     59.9  
   720x400        70.1  
DP1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
  1400x900_60.00 (0x2aa)  103.5MHz
        h: width  1400 start 1480 end 1624 total 1848 skew    0 clock   56.0KHz
        v: height  900 start  903 end  913 total  934           clock   60.0Hz
  1920x1080_60.00 (0x2ab)  173.0MHz
        h: width  1920 start 2048 end 2248 total 2576 skew    0 clock   67.2KHz
        v: height 1080 start 1083 end 1088 total 1120           clock   60.0Hz

如您所见,HDMI 已连接,但显示器没有信号。

我有以下内容.xprofile

xrandr --newmode "1400x900_60.00"  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync
xrandr --addmode VGA1 1400x900_60.00
xrandr --newmode "1920x1080_60.00"  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync
xrandr --addmode VGA1 1920x1080_60.00
xrandr --output VGA1 --mode 1920x1080_60.00
xrandr --addmode HDMI1 1920x1080_60.00
xrandr --output HDMI1 --mode 1920x1080_60.00

我本以为这会正确设置 HDMI 显示器。当我运行此命令时

xrandr --output HDMI1 --mode 1920x1080_60.00

我明白了

xrandr: cannot find crtc for output HDMI1

命令 lspci 的输出:

lspci -k | grep -EA2 'VGA|3D'
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
    Subsystem: Dell Device 044f
    Kernel driver in use: i915
--
01:00.0 VGA compatible controller: NVIDIA Corporation GT216M [GeForce GT 330M] (rev a2)
    Subsystem: Dell Device 044f
    Kernel driver in use: nvidia

答案1

尝试您的电缆连接,它应该显示已连接,HDMI 有点棘手,并在显示器设置中打开 HDMI 并应用,当出现图像时说确定;

并将其设为默认设置。

相关内容