如何安装和配置 SAS 存储驱动程序

如何安装和配置 SAS 存储驱动程序

我们最近在这里的机器上安装了 LSI SAS2008(也称为 LSI SAS 9211 8i)HBA。其目的是连接到 storewize v3700。storewize 映射到机器,启动时我们可以看到映射的卷出现在 BIOS 中。但是 ubuntu 能够查看/映射/安装它们。我们尝试安装 mpt2sas 驱动程序,但在 lshw 中存储仍然显示为未认领,并且显然在 lsmod 中无人使用。请参阅下面的 lsmod 和 lshw 输出。我们安装的驱动程序来自此处http://www.lsi.com/products/host-bus-adapters/pages/lsi-sas-9211-8i.aspx

任何建议/提示都将不胜感激!谢谢!

Module                Size    Used By 
mpt2sas               155628  0 
raid_class             13554  1 mpt2sas
megaraid_sas          100086  2 
scsi_transport_sas     41034  1 mpt2sas
ahci                   34062  0 
bnx2                   85175  0 
libahci                32424  1 ahci



*-pci:3
             description: PCI bridge
             product: RD890S PCI Express bridge for GPP2 port 1
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: c
             bus info: pci@0000:00:0c.0
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: pci pm pciexpress msi ht normal_decode bus_master     cap_list
             configuration: driver=pcieport
             resources: irq:54 ioport:d000(size=4096) memory:80000000-805fffff 
           *-storage UNCLAIMED
                description: Serial Attached SCSI controller
                product: SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon]
                vendor: LSI Logic / Symbios Logic
                physical id: 0
                bus info: pci@0000:04:00.0
                version: 03
                width: 64 bits
                clock: 33MHz
                capabilities: storage pm pciexpress vpd msi msix cap_list
                configuration: latency=0
                resources: ioport:d000(size=256) memory:804c0000-804c3fff memory:80080000-800bffff memory:80000000-8007ffff memory:804c4000-80503fff memory:800c0000-804bffff

答案1

用此链接对其进行排序::https://baldpenguin.blogspot.co.uk/2014/04/

必须删除该突袭。

使用此命令显示 raid dar 索引:: sas2ircu LIST

root@lancache:~# sas2ircu LIST
LSI Corporation SAS2 IR Configuration Utility.
Version 13.00.00.00 (2012.02.17)
Copyright (c) 2009-2012 LSI Corporation. All rights reserved.


         Adapter      Vendor  Device                       SubSys  SubSys
 Index    Type          ID      ID    Pci Address          Ven ID  Dev ID
 -----  ------------  ------  ------  -----------------    ------  ------
   0     SAS2008     1000h    72h   00h:01h:00h:00h      1028h   1f1dh
SAS2IRCU: Utility Completed Successfully.

索引为 0

现在我需要 RAID 卷

root@lancache:~# sas2ircu 0  DISPLAY
LSI Corporation SAS2 IR Configuration Utility.
Version 13.00.00.00 (2012.02.17)
Copyright (c) 2009-2012 LSI Corporation. All rights reserved.

Read configuration has been initiated for controller 0
------------------------------------------------------------------------
Controller information
------------------------------------------------------------------------
  Controller type                         : SAS2008
  BIOS version                            : 7.11.01.00
  Firmware version                        : 7.15.04.00
  Channel description                     : 1 Serial Attached SCSI
  Initiator ID                            : 0
  Maximum physical devices                : 39
  Concurrent commands supported           : 2607
  Slot                                    : 1
  Segment                                 : 0
  Bus                                     : 1
  Device                                  : 0
  Function                                : 0
  RAID Support                            : Yes
------------------------------------------------------------------------
IR Volume information
------------------------------------------------------------------------
IR volume 1
  Volume ID                               : 79
  Status of volume                        : Inactive, Okay (OKY)
  Volume wwid                             : 0edea3a351dff36d
  RAID level                              : RAID0
  Size (in MB)                            : 7629392
  Physical hard disks                     :
  PHY[0] Enclosure#/Slot#                 : 1:1
  PHY[1] Enclosure#/Slot#                 : 1:0
  PHY[2] Enclosure#/Slot#                 : 0:0
  PHY[3] Enclosure#/Slot#                 : 0:0
------------------------------------------------------------------------
Physical device information
------------------------------------------------------------------------
Initiator at ID #0

Device is a Hard disk
  Enclosure #                             : 0
  Slot #                                  : 0
  SAS Address                             : 0000000-0-0000-0000
  State                                   : Missing (MIS)
  Manufacturer                            : SEAGATE
  Model Number                            :
  Firmware Revision                       :
  Serial No                               : Z1P14BEL0000C225
  GUID                                    : N/A
  Drive Type                              : Undetermined

Device is a Hard disk
  Enclosure #                             : 0
  Slot #                                  : 0
  SAS Address                             : 0000000-0-0000-0000
  State                                   : Missing (MIS)
  Manufacturer                            : SEAGATE
  Model Number                            :
  Firmware Revision                       :
  Serial No                               : Z1P00HSD0000S129
  GUID                                    : N/A
  Drive Type                              : Undetermined

Device is a Hard disk
  Enclosure #                             : 1
  Slot #                                  : 0
  SAS Address                             : 5000c50-0-342c-217d
  State                                   : Optimal (OPT)
  Size (in MB)/(in sectors)               : 1907729/3907029167
  Manufacturer                            : SEAGATE
  Model Number                            : ST2000NM0001
  Firmware Revision                       : 0001
  Serial No                               : Z1P0288F0000S137KRQ9
  GUID                                    : 5000c500342c217f
  Protocol                                : SAS
  Drive Type                              : SAS_HDD

Device is a Hard disk
  Enclosure #                             : 1
  Slot #                                  : 1
  SAS Address                             : 5000c50-0-8d46-33cd
  State                                   : Optimal (OPT)
  Size (in MB)/(in sectors)               : 1907729/3907029167
  Manufacturer                            : SEAGATE
  Model Number                            : ST2000NM0001
  Firmware Revision                       : 0002
  Serial No                               : Z1P2JXMV0000C2426MCF
  GUID                                    : 5000c5008d4633cf
  Protocol                                : SAS
  Drive Type                              : SAS_HDD
------------------------------------------------------------------------
Enclosure information
------------------------------------------------------------------------
  Enclosure#                              : 1
  Logical ID                              : 5782bcb0:2a464900
  Numslots                                : 8
  StartSlot                               : 0
------------------------------------------------------------------------
SAS2IRCU: Command DISPLAY Completed Successfully.
SAS2IRCU: Utility Completed Successfully.

So the Volum ID os  79 ...

Now to delete the volume.

root@lancache:~# sas2ircu 0 DELETEVOLUME 79
LSI Corporation SAS2 IR Configuration Utility.
Version 13.00.00.00 (2012.02.17)
Copyright (c) 2009-2012 LSI Corporation. All rights reserved.

You are about to delete an existing RAID Volume on a controller. This command
will delete the specified RAID volume and associated HotSpare drive(s).

WARNING: Proceeding with this operation may cause data loss or data
         corruption. Are you sure you want to proceed (YES/NO)? yes

WARNING: This is you last chance to abort this operation. Do you wish
         to abort (YES/NO)? no
Please wait, may take up to a minute...
SAS2IRCU: Volume deleted successfully.
SAS2IRCU: Command DELETEVOLUME Completed Successfully.
SAS2IRCU: Utility Completed Successfully.

现在磁盘已恢复正常

root@lancache:~# lshw -c disk
  *-disk:0
       description: SCSI Disk
       product: ST2000NM0001
       vendor: SEAGATE
       physical id: 0.0.0
       bus info: scsi@0:0.0.0
       logical name: /dev/sdc
       version: 0001
       serial: Z1P0288F0000S137KRQ9
       size: 1863GiB (2TB)
       capabilities: 7200rpm
       configuration: ansiversion=6 logicalsectorsize=512 sectorsize=512
  *-disk:1
       description: SCSI Disk
       product: ST2000NM0001
       vendor: SEAGATE
       physical id: 0.1.0
       bus info: scsi@0:0.1.0
       logical name: /dev/sdb
       version: 0002
       serial: Z1P2JXMV0000C2426MCF
       size: 1863GiB (2TB)
       capabilities: 7200rpm
       configuration: ansiversion=6 logicalsectorsize=512 sectorsize=512

现在我可以对驱动器进行 fdisk 并使用 zfs 进行设置。

Disk /dev/sdb: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sdc: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

我知道这是一篇旧帖子但值得大家更新。

相关内容