我正在尝试连接到外部高清 (Samsun D3 站)。
- 任何操作系统(MAC、Windows 和 Linux)都无法识别它。
- 我尝试过不同的电缆(USB 和 AC),但没什么区别
- 我甚至尝试打开盒子并直接插入
它似乎安装了驱动程序并“旋转”磁盘大约 10 秒钟,然后断开连接并无法检测到......
输出如下dmesg
:
[42377.183923] usb 2-6: new SuperSpeed USB device number 11 using xhci_hcd
[42377.201479] usb 2-6: New USB device found, idVendor=04e8, idProduct=6123
[42377.201483] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[42377.201485] usb 2-6: Product: D3 Station
[42377.201486] usb 2-6: Manufacturer: Samsung
[42377.201488] usb 2-6: SerialNumber: 00000000011E0A49
[42377.202386] usb-storage 2-6:1.0: USB Mass Storage device detected
[42377.202464] scsi host8: usb-storage 2-6:1.0
[42378.202328] scsi 8:0:0:0: Direct-Access Samsung D3 Station 0202 PQ: 0 ANSI: 6
[42378.202560] sd 8:0:0:0: Attached scsi generic sg2 type 0
[42378.203368] sd 8:0:0:0: [sdb] Spinning up disk...
[42383.663679] .....................
[42404.588868] usb 2-6: USB disconnect, device number 11
[42404.772994] .ready
[42404.773145] sd 8:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[42404.773147] sd 8:0:0:0: [sdb] Sense not available.
[42404.773188] sd 8:0:0:0: [sdb] Write Protect is off
[42404.773200] sd 8:0:0:0: [sdb] Mode Sense: 4c 00 00 40
[42404.773226] sd 8:0:0:0: [sdb] No Caching mode page found
[42404.773228] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[42404.773426] sd 8:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[42404.773429] sd 8:0:0:0: [sdb] Sense not available.
[42404
.773443] sd 8:0:0:0: [sdb] Attached SCSI disk
知道这是什么意思吗?该怎么办?非常感谢,
答案1
我去了一家专业机构,他们给了我以下诊断:
“看来固件有缺陷(在电子卡和磁盘板上)。此外,看来数据是通过 SATA/USB 接口加密的。”
或法语
“Seagate Z1E7SPVR。检测到的问题:固件损坏(在磁盘和磁盘驱动器上)。最有可能的是,数据被 SATA/USB 接口卡加密。最有可能的是,检测到的物理缺陷,是第一次出现固件问题。”
如果我找到解决方法,我会继续更新帖子。但至少我知道哪里出了问题。有没有人知道如何自己解决,而不用支付 2600 瑞士法郎?