可能重复:
如何安装 BCM4312 无线驱动程序?
以下是命令的结果sudo lshw -c network
。我认为“UNCLAIMED”是指缺少驱动程序。
*-network UNCLAIMED
description: Network controller
product: BCM4311 802.11b/g WLAN
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:0c:00.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: latency=0
resources: memory:f1ffc000-f1ffffff
*-network
description: Ethernet interface
product: NetXtreme BCM5755M Gigabit Ethernet PCI Express
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:09:00.0
logical name: eth0
version: 02
serial: 00:1c:23:2f:06:45
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.116 firmware=5755m-v3.29 latency=0 link=no multicast=yes port=twisted pair
resources: irq:45 memory:f1ef0000-f1efffff
答案1
由于内核问题,11.04 中的 STA 驱动程序无法工作。您必须安装 B43xx 固件。只需从软件中心或 synaptic 安装 firmware-b43-installer 即可。
您也可以从命令行执行此操作。
sudo apt-get 安装固件-b43-安装程序