3 个显示器的问题

3 个显示器的问题

我全新安装了11.04(重新格式化等)并且我的第三台显示器有问题。我运行 2 个视频卡和默认 NVidia 驱动程序。我让驱动程序生成我的 xorg.conf,因为我还是个新手 :)

我对 2 个工作显示器没有意见。它们设置为 TwinView,这可能是也可能不是最好的,但我宁愿避免运行 Xinerama,因为我担心我将无法再使用 Unity。长话短说,同一显卡上的 2 个显示器没有已知问题

第三台显示器似乎没有窗口管理器。我没有启动栏,没有面板,当我右键单击 -> 新建文件时,gedit 打开,没有文件 / 编辑 / 工具 ... 选项,标题栏也不可见(关闭、最小化、最大化)。如果我尝试在文本编辑器中写入任何内容,它会将文本写入另一个正在工作的屏幕之一(几乎就像屏幕上的窗口一样)第三台显示器从未获得焦点)。我的 xorg.conf 文件发布在下面——请让我知道任何其他有用的文件。我非常感谢你的建议

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 270.29  (buildd@roseapple)  Fri Feb 25 14:43:24 UTC 2011

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" RightOf "Screen1"
    Screen      1  "Screen1" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "ProView/EMC/PTS"
    HorizSync       30.0 - 80.0
    VertRefresh     60.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "DELL E1910H"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 9400 GT"
    BusID          "PCI:1:0:0"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8400 GS"
    BusID          "PCI:5:0:0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "TwinViewXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1280+0"
    SubSection     "Display"
    Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "nvidia-auto-select +0+0; 1366x768 +0+0"
    SubSection     "Display"
    Depth       24
    EndSubSection
EndSection

答案1

我有两个显示器运行单独的 X 屏幕,其中一个是垂直的,我也遇到了同样的问题。我可以通过从主显示器上的终端发出命令来运行窗口管理器DISPLAY=:0.1 unity --replace。因此,您可以通过找出第三个显示器的标识并替换:0.1上述命令中的来启动和运行。

相关内容