这是我的问题,我刚刚安装了 Ubuntu 12.10,一切顺利,但是当我尝试连接到任何无线网络时,它保持连接状态,过了一会儿,它显示“无线网络断开连接 - 您现在处于离线状态”
太感谢了。
这是有关我的卡和其他东西的一些信息,我对这个主题确实不太了解:
ifconfig:
eth0 Link encap:Ethernet HWaddr 64:31:50:7d:a2:c8
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:224 errors:0 dropped:0 overruns:0 frame:0
TX packets:224 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:18400 (18.4 KB) TX bytes:18400 (18.4 KB)
wlan0 Link encap:Ethernet HWaddr 8c:a9:82:06:2c:2a
inet6 addr: fe80::8ea9:82ff:fe06:2c2a/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:108 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:29068 (29.0 KB)
配置:
eth0 no wireless extensions.
lo no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"60200516"
Mode:Managed Frequency:2.462 GHz Access Point: EC:55:F9:38:3B:A3
Bit Rate=1 Mb/s Tx-Power=14 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=70/70 Signal level=-27 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
lspci:
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
02:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
lsusb:
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
02:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
rfkill_列表:
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
2: hp-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
3: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
答案1
答案2
此问题有错误报告 (Ubuntu 12.10):
NM 无法连接 Wi-Fi;dhclient 可以工作 - Intel Centrino Wireless-N 1000 iwlwifi
这表明 Ubuntu 无法发布系统配置此设备/驱动程序。
可能的解决方法:(来自帖子#40)
jerrylamos (jerrylamos) 写于 2012-11-24:
由于这个错误在 3.7.0-3 中更加严重,因此解决方法:
Startup Applications Add Title: Connect command: ~/wl
其中 wl 是
#!/bin/bash sudo iwconfig wlan0 essid LAUREL { <-- your SSID } sudo dhclient wlan0 exit 0
到目前为止,三双靴子都运行正常。
为什么 Ubuntu 无法发出 iwconfig??
答案3
可能是您的网络路由器将您踢出。您是否检查过是否存在任何 IP 地址冲突,或者您的网络 ID 是否正确?以下是检查方法。
如果您有另一台计算机连接到运行 Windows(7)的网络,请打开网络和共享窗口。在窗口中查看您的活动网络。单击网络连接并查找您的 SSID,这就是网络 ID。在同一窗口的详细信息下,您应该看到 IPv4 地址。它通常类似于 192.168.1.100。当您返回到您的 Ubuntu 计算机时,单击右上角的网络图标,然后选择连接信息以显示您的 IP 地址。数字应该相似,但最后的数字必须不同(例如 Windows IP 192.168.1.100,Linux IP 192.168.1.102)如果它们匹配,您需要更改一个。要检查网络 ID,请单击网络图标并选择编辑连接。选择您的无线网络,单击编辑,然后应该显示 SSID。它必须与 Windows 计算机上的匹配。如果 IP 不同而 SSID 匹配,那么您遇到了一个我不熟悉的其他问题。
答案4
我找到了另一种解决方法ndiswrapper
,即在 Ubuntu 中注入 Windows XP 驱动程序的工具。您可以从以下网址下载http://sourceforge.net/projects/ndiswrapper/files/latest/download?source=files
下载.tar.gz 文件后,将其解压到桌面并按照INSTALL
文件中的所有说明进行操作。
有一段文字要求您ndiswrapper -l
在终端中输入“”,并说您应该得到“ driver present, hardware present
”。如果您得到类似“”的内容device (2001:3308) present (alternate driver: rtl8192cu)
,请将备用驱动程序的名称(在本例中为“ rtl8192cu
”)添加到/etc/modprobe.d/blacklist.conf
要执行此操作,只需在终端中输入
sudo gedit /etc/modprobe.d/blacklist.conf
并在新行中添加“ blacklist rtl8192cu
”(rtl8192cu
这是我拥有的驱动程序的名称,您应该输入您拥有的驱动程序的名称)。然后保存并重新启动。如果您正确遵循INSTALL
文件中的所有说明,wifi 密钥将使用 Windows 驱动程序而不是 Linux 驱动程序。