我有一台 HP 笔记本电脑。我正尝试连接到互联网。但我似乎无法通过 LAN 和无线连接。无线未列出我的连接。事实上,“Wi-Fi 网络”按钮已停用。通过以太网连接时,它会检测到连接的存在,但一段时间后,它会保持空闲状态而没有连接。在同一台笔记本电脑上通过双启动模式的 Windows 连接时似乎没有任何问题。
结果如下ifconfig
:
eth0 Link encap:Ethernet HWaddr d0:bf:9c:0a:ce:7d
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:159 errors:0 dropped:0 overruns:0 frame:0
TX packets:159 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:11377 (11.3 KB) TX bytes:11377 (11.3 KB)
wlan0 Link encap:Ethernet HWaddr 74:29:af:94:27:59
inet addr:10.10.0.1 Bcast:10.10.0.255 Mask:255.255.255.0
inet6 addr: fe80::7629:afff:fe94:2759/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:46 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:8637 (8.6 KB)
结果如下lspci | grep Wireless lspci | grep Ethernet
:
0a:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 07)
结果如下lspci -nnk | grep -iA2 net
:
08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 07)
Subsystem: Hewlett-Packard Company Device [103c:2337]
Kernel driver in use: r8169
--
0a:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
Subsystem: Hewlett-Packard Company Device [103c:2231]
Kernel driver in use: rtl8723be
结果如下rfkill list all
:
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
答案1
- 跑步
sudo ifdown eth0
- 配置静态 IP 地址
/etc/network/interfaces
或输入自动 DHCP。 - 跑步
sudo ifup eth0
- 跑步
/etc/init.d/networking restart