我正在尝试安装基于 Autopilot Landscape 的云。我按照步骤选择服务，然后选择硬件。下一步是部署，首先在第一个节点上运行 juju bootstrap。节点在 MAAS 中显示“已部署”，但 Landscape 安装程序卡住了。
错误如下：
juju ended with exit code 1 (out='', err='Bootstrapping environment "1"
Starting new instance for initial state server
Launching instance
- /MAAS/api/1.0/nodes/node-f86836fa-4d60-11e6-b0a6-002590c3a86e/
Installing Juju agent on bootstrap instance
Waiting for address
Attempting to connect to IX2-M09-28.maas:22
Attempting to connect to IX2-M09-28.maas:22
Attempting to connect to 10.1.3.101:22
Attempting to connect to 104.254.214.3:22
这是完整的错误：
http://paste.ubuntu.com/20022764/
这是我的 ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:1548320 errors:0 dropped:0 overruns:0 frame:0
TX packets:1548320 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:577618249 (577.6 MB) TX bytes:577618249 (577.6 MB)
lxcbr0 Link encap:Ethernet HWaddr b6:46:f7:24:9d:1a
inet addr:10.0.3.1 Bcast:10.0.3.255 Mask:255.255.255.0
inet6 addr: fe80::b446:f7ff:fe24:9d1a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:648 (648.0 B)
p2p1 Link encap:Ethernet HWaddr 00:25:90:c3:a8:6e
inet addr:104.2XX.XXX.2 Bcast:104.2XX.XXX.255 Mask:255.255.255.0
inet6 addr: fe80::225:90ff:fec3:a86e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:728835 errors:0 dropped:0 overruns:0 frame:0
TX packets:1137937 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:449391074 (449.3 MB) TX bytes:1526276817 (1.5 GB)
Memory:fb980000-fba00000
p2p2 Link encap:Ethernet HWaddr 00:25:90:c3:a8:6f
inet addr:10.1.3.2 Bcast:10.1.3.255 Mask:255.255.255.0
inet6 addr: fe80::225:90ff:fec3:a86f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1142988 errors:0 dropped:0 overruns:0 frame:0
TX packets:2141794 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:79832182 (79.8 MB) TX bytes:3182895176 (3.1 GB)
Memory:fb900000-fb980000
virbr0 Link encap:Ethernet HWaddr a2:3f:3a:3e:c3:45
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
我的所有节点都有 2 个 NIC。1 个 NIC 用于公共网络，1 个 NIC 用于私有网络。我能够从私有网络“p2p2”启动和部署节点。
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto p2p1
iface p2p1 inet static
address 104.2XX.XXX.2
netmask 255.255.255.0
network 104.2XX.XXX.0
broadcast 104.2XX.XXX.255
gateway 104.2XX.XXX.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 8.8.8.8 4.2.2.2 8.8.4.4
#secondary network interface - private
auto p2p2
iface p2p2 inet static
address 10.1.3.2
netmask 255.255.255.0
network 10.1.3.0
broadcast 10.1.3.255
我如何才能实现这种网络拓扑？我需要重新开始吗？我肯定遗漏了什么。任何帮助都非常感谢！
答案1
日志显示 Autopilot 选择引导的 MAAS 机器无法访问 streams.canonical.com，您能否确认是否已安装防火墙？