我的 Dell Precision 7510 搭载 Ubuntu 17.10,经常无法挂起。显示警告消息,然后返回登录屏幕。
dmesg
给出:
thermal thermal_zone10: failed to read out thermal zone (-5)
[26797.500002] PM: Syncing filesystems ... done.
[26797.502461] PM: Preparing system for sleep (freeze)
[26797.552411] Freezing user space processes ... (elapsed 0.001 seconds) done.
[26797.554190] OOM killer disabled.
[26797.554190] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[26797.555319] PM: Suspending system (freeze)
[26797.555320] Suspending console(s) (use no_console_suspend to debug)
[26797.555526] xhci_hcd 0000:3c:00.0: WARN: xHC CMD_RUN timeout
[26797.555530] suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110
[26797.555532] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110
[26797.555535] dpm_run_callback(): pci_pm_suspend+0x0/0x130 returns -110
[26797.555536] PM: Device 0000:3c:00.0 failed to suspend async: error -110
[26798.055512] thunderbolt 0000:06:00.0: Ignoring mailbox command error (-110) in icm_suspend
[26798.055645] PM: Some devices failed to suspend, or early wake event detected
[26798.055740] PM: resume of devices complete after 0.092 msecs
[26818.437218] PM: Finishing wakeup.
[26818.437219] OOM killer enabled.
[26818.437221] Restarting tasks ... done.
我尝试了这个站点的解决方案(无法再找到它),其中我添加了一个脚本,/etc/pm/config.d/
但SUSPEND_MODULES=xhci_hcd
它似乎不起作用。
lshw
编辑:以下是有关该设备的信息:
*-generic:4
description: Unassigned class
product: Illegal Vendor ID
vendor: Illegal Vendor ID
physical id: 5
bus info: pci@0000:3c:00.0
version: ff
width: 32 bits
clock: 66MHz
capabilities: bus_master vga_palette cap_list
configuration: driver=xhci_hcd latency=255 maxlatency=255 mingnt=255
resources: irq:138 memory:d9f00000-d9f0ffff
*-usbhost:0
product: xHCI Host Controller
vendor: Linux 4.13.0-32-generic xhci-hcd
physical id: 0
bus info: usb@3
logical name: usb3
version: 4.13
capabilities: usb-2.00
configuration: driver=hub slots=2 speed=480Mbit/s
*-usbhost:1
product: xHCI Host Controller
vendor: Linux 4.13.0-32-generic xhci-hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 4.13
capabilities: usb-3.10
configuration: driver=hub slots=2 speed=10000Mbit/s