☰

如何设置贝尔金 USB 无线适配器 (F5D7050A)？ （Linux Mint 18.1 Xfce）

tag-icon • tag-icon linux-mint wifi usb network-interface
如何设置贝尔金 USB 无线适配器 (F5D7050A)？ （Linux Mint 18.1 Xfce）

我刚刚开始使用 Linux，并且一直在尝试设置我的旧贝尔金无线 G USB 网络适配器，但没有成功。系统检测到设备，网络管理器显示打开/关闭 wifi 的选项，但即使使用“iwlist 设备扫描”也找不到任何网络（不显示扫描结果）。已经尝试使用 ndiswrapper 安装 rt2500usb 驱动程序，但仍然相同的结果。

如果有人能帮助我那就太好了。谢谢

这就是我所拥有的：

System:    Host: HWNLINUX Kernel: 4.4.0-53-generic i686 (32 bit) Desktop: Xfce 4.12.3
           Distro: Linux Mint 18.1 Serena
Machine:   Mobo: TAR model: P4M89-M7B v: Ver:1.0 Bios: Phoenix v: 6.00 PG date: 08/02/2007
CPU:       Dual core Intel Pentium Dual E2140 (-MCP-) cache: 1024 KB 
           clock speeds: max: 800 MHz 1: 800 MHz 2: 600 MHz
Graphics:  Card: VIA P4M890 [S3 UniChrome Pro]
           Display Server: X.Org 1.18.4 drivers: fbdev (unloaded: vesa) Resolution: [email protected]
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.8, 128 bits) GLX Version: 3.0 Mesa 11.2.0
Audio:     Card VIA VT8237A/VT8251 HDA Controller driver: snd_hda_intel Sound: ALSA v: k4.4.0-53-generic
Network:   Card-1: VIA VT6102/VT6103 [Rhine-II] driver: via-rhine
           IF: enp0s18 state: unknown speed: 100 Mbps duplex: full mac: 00:e0:4d:4e:9e:cb
           Card-2: Belkin F5D7050 Wireless G Adapter v1000/v2000 [Intersil ISL3887]
           IF: N/A state: N/A mac: N/A
Drives:    HDD Total Size: 250.1GB (2.9% used) ID-1: /dev/sda model: SAMSUNG_HD250HJ size: 250.1GB
Partition: ID-1: / size: 228G used: 5.0G (3%) fs: ext4 dev: /dev/sda1
           ID-2: swap-1 size: 2.08GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 48.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 183 Uptime: 29 min Memory: 580.7/1948.8MB Client: Shell (bash) inxi: 2.2.35

iw配置：

wlx0011508a31ab  IEEE 802.11bg  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off

lo        no wireless extensions.

enp0s18   no wireless extensions.

sudo lshw -C 网络：

  *-usb                   
       description: Wireless interface
       product: Belkin 54g USB Network Adapter
       vendor: Belkin
       physical id: 4
       bus info: usb@1:4
       logical name: wlx0011508a31ab
       version: 0.01
       serial: 00:11:50:8a:31:ab
       capabilities: usb-2.00 ethernet physical wireless
       configuration: broadcast=yes driver=rt2500usb driverversion=4.4.0-53-generic firmware=N/A link=no maxpower=300mA multicast=yes speed=480Mbit/s wireless=IEEE 802.11bg
  *-network
       description: Ethernet interface
       product: VT6102/VT6103 [Rhine-II]
       vendor: VIA Technologies, Inc.
       physical id: 12
       bus info: pci@0000:00:12.0
       logical name: enp0s18
       version: 7c
       serial: 00:e0:4d:4e:9e:cb
       size: 100Mbit/s
       capacity: 100Mbit/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.5.1 duplex=full ip=192.168.0.104 latency=32 link=yes maxlatency=8 mingnt=3 multicast=yes port=MII speed=100Mbit/s
       resources: irq:23 ioport:d000(size=256) memory:fdffe000-fdffe0ff

lsusb:

Bus 001 Device 002: ID 050d:7050 Belkin Components F5D7050 Wireless G Adapter v1000/v2000 [Intersil ISL3887]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

lsmod | grep rt2500usb：

rt2500usb              32768  0
rt2x00usb              20480  1 rt2500usb
rt2x00lib              49152  2 rt2x00usb,rt2500usb

相关内容