☰

在桌面上配置宽屏​​ (1600x900)

tag-icon • tag-icon resolution screen
在桌面上配置宽屏​​ (1600x900)

我刚刚安装了一台 22 英寸宽的三星显示器，它看起来非常奇怪——显示屏右侧 20％ 被包裹在显示器左侧！

根据 uname -a 这是我的系统：

Linux ubuntu 2.6.32-34-generic #77-Ubuntu SMP Tue Sep 13 19:39:17 UTC 2011 x86_64 GNU/Linux

这是我的.config/monitors.xml：

<monitors version="1">
  <configuration>
      <clone>no</clone>
      <output name="default">
          <vendor>???</vendor>
          <product>0x0000</product>
          <serial>0x00000000</serial>
          <width>1600</width>
          <height>900</height>
          <rate>0</rate>
          <x>0</x>
          <y>0</y>
          <rotation>normal</rotation>
          <reflect_x>no</reflect_x>
          <reflect_y>no</reflect_y>
          <primary>no</primary>
      </output>
  </configuration>
</monitors>

这些是我的 /etc/X11 中的文件：

drwxr-xr-x  10 root root  4096 2011-08-18 22:35 .
drwxr-xr-x 144 root root 12288 2012-01-15 15:48 ..
drwxr-xr-x   2 root root  4096 2011-11-17 09:09 app-defaults
drwxr-xr-x   2 root root  4096 2011-07-19 15:21 cursors
-rw-r--r--   1 root root    14 2011-08-18 22:35 default-display-manager
drwxr-xr-x   6 root root  4096 2011-07-19 15:17 fonts
-rw-r--r--   1 root root 17394 2011-08-18 22:35 rgb.txt
lrwxrwxrwx   1 root root    13 2011-08-18 22:35 X -> /usr/bin/Xorg
drwxr-xr-x   3 root root  4096 2011-07-19 15:21 xinit
drwxr-xr-x   2 root root  4096 2010-04-15 15:12 xkb
-rw-r--r--   1 root root   270 2011-08-18 22:35 xorg.conf.failsafe
-rwxr-xr-x   1 root root   709 2011-08-18 22:35 Xreset
drwxr-xr-x   2 root root  4096 2011-07-19 15:08 Xreset.d
drwxr-xr-x   2 root root  4096 2011-07-19 15:08 Xresources
-rwxr-xr-x   1 root root  3730 2011-08-18 22:35 Xsession
drwxr-xr-x   2 root root  4096 2011-08-23 18:08 Xsession.d
-rw-r--r--   1 root root   265 2011-08-18 22:35 Xsession.options
-rw-------   1 root root   601 2011-08-18 22:35 Xwrapper.config

这是我的 xorg.conf.failsafe：

Section "Device"
    Identifier  "Configured Video Device"
    Driver      "fbdev"
EndSection

Section "Monitor"
    Identifier  "Configured Monitor"
EndSection

Section "Screen"
    Identifier  "Default Screen"
    Monitor     "Configured Monitor"
    Device      "Configured Video Device"
EndSection

这些是我的系统上可用的分辨率（根据 xrandr）：

Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
   1024x768        0.0* 
   800x600         0.0  
   640x480         0.0

以下是我从 read-edid 获得的信息：

erelsgl@ubuntu:~$ sudo get-edid | parse-edid
parse-edid: parse-edid version 2.0.0
get-edid: get-edid version 2.0.0

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
    Function supported
    Call successful

    VBE version 300
    VBE string at 0x11100 "Intel(R)Sandybridge Desktop Graphics Chipset Accelerated VGA BIOS"

VBE/DDC service about to be called
    Report DDC capabilities

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
    Function supported
    Call successful

    Monitor and video card combination does not support DDC1 transfers
    Monitor and video card combination supports DDC2 transfers
    0 seconds per 128 byte EDID block transfer
    Screen is not blanked during DDC transfer

Reading next EDID block

VBE/DDC service about to be called
    Read EDID

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
    Function supported
    Call successful

parse-edid: EDID checksum passed.

    # EDID version 1 revision 3
Section "Monitor"
    # Block type: 2:0 3:fd
    # Block type: 2:0 3:fc
    Identifier "SyncMaster"
    VendorName "SAM"
    ModelName "SyncMaster"
    # Block type: 2:0 3:fd
    HorizSync 30-81
    VertRefresh 56-75
    # Max dot clock (video bandwidth) 150 MHz
    # Block type: 2:0 3:fc
    # Block type: 2:0 3:ff
    # DPMS capabilities: Active off:yes  Suspend:no  Standby:no

    Mode    "1600x900"  # vfreq 60.000Hz, hfreq 60.000kHz
        DotClock    108.000000
        HTimings    1600 1624 1704 1800
        VTimings    900 901 904 1000
        Flags   "+HSync" "+VSync"
    EndMode
    # Block type: 2:0 3:fd
    # Block type: 2:0 3:fc
    # Block type: 2:0 3:ff
EndSection

我的显卡是：

erelsgl@ubuntu:~$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09)

先感谢您！

答案1

通过安装这两个来解决：

http://intellinuxgraphics.org/2011Q1.html

http://ubuntuforums.org/showpost.php?p=11223913&postcount=16

我不知道它们中的哪一个真正解决了这个问题 - 只需安装两者，重新启动，它就可以工作了。

相关内容