14.04
我不仅尝试了捆绑的 Baobab，还尝试了 K4dirstat、Filelight 和 JDiskReport。我甚至尝试在 Wine 下运行 WinDirStat！它们都开始工作，然后在大约一半的过程中冻结。
有什么建议吗？
编辑：这是关于我的分区的一些信息。出现错误时我尝试扫描的分区是sda2。我已启动 Windows 7 并从那里运行 WinDirStat，然后我能够成功完成扫描。（所以实际上，我应该去睡觉并忘掉这整个问题。我有点强迫症。）
以下是输出sudo smartctl --all /dev/sda：
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-65-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST500LT012-1DG142
Serial Number: S3PB1KVE
LU WWN Device Id: 5 000c50 0752d8c10
Firmware Version: 0001SDM1
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Oct 11 02:21:59 2015 IST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 97) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 106 099 006 Pre-fail Always - 10534328
3 Spin_Up_Time 0x0003 100 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2451
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 16
7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 17312465395
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2345 (153 159 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2448
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 058 049 045 Old_age Always - 42 (Min/Max 31/45)
191 G-Sense_Error_Rate 0x0032 099 099 000 Old_age Always - 2375
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 53
193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 4436
194 Temperature_Celsius 0x0022 042 051 000 Old_age Always - 42 (0 22 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 098 098 000 Old_age Offline - 100167227279665
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 10919957375
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 23978392682
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Aborted by host 60% 702 -
# 2 Short offline Completed without error 00% 200 -
# 3 Short offline Completed without error 00% 32336 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
答案1
耐心是一种美德：首先，如果您的驱动器很大（或很慢），请等待足够长的时间让程序完成，因为它正在分析您的所有驱动器。
如果失败了（等待一晚），您的某个分区上可能存在文件系统错误。
因此对于 Windows 分区，启动 Windows 并执行：
CHKDSK /F X:
对于每个分区，您的分区的驱动器号是多少（X可能是C，等等。DE
对于ext4分区，启动 Ubuntu LiveDVD 并执行：
fsck -C /dev/XdYZ
其中X是h或s取决于 ATA/SCSI 驱动器 并且是来自到 的Y字母并且是数字。（要查看您的系统，请在您的系统上输入）azZblkid
这应该可以消除文件系统错误！
答案2
这些磁盘使用情况应用程序一度变成灰色且无响应，但当我等待时，它们最终恢复正常并完成了工作。它们都给出了正确的结果，除了 K4DirStat，它给出了错误的结果。我还启动了 Windows 并进行了磁盘扫描和修复，这也可能是导致程序最终解冻的原因。