我最近刚刚更新到 16.10,但是挂起计算机后,我似乎无法再次唤醒它,屏幕变黑,快速按下电源按钮或任何其他按钮后什么也没发生。唯一似乎有效的方法是硬重启。我读到过挂起和休眠可能是硬件问题,但在 16.10 之前可以挂起,所以在我看来问题出在最新更新上。
(在此更新之前从未尝试过休眠,它不起作用,但这可能是硬件问题,而我现在并不担心这个问题。)
针对早期版本问题的另一个类似问题询问了 pm-suspend.log,sudo lspci -vnn | grep -A12 VGA" and "cat /proc/cmdline"
因此我也会将其附加在这里。
pm-暂停.log: http://paste.ubuntu.com/23441649/
## sudo lspci -vnn | grep -A12 VGA: ##
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation >Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) >(prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. 2nd Generation Core Processor Family >Integrated Graphics Controller [1043:1652] Flags: bus master, fast devsel, latency 0, IRQ 36 Memory at dc400000 (64-bit, non-prefetchable) [size=4M] Memory at b0000000 (64-bit, prefetchable) [size=256M] I/O ports at e000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 2 Capabilities: [a4] PCI Advanced Features Kernel driver in use: i915 Kernel modules: i915
-- 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF119M >[GeForce 610M] [10de:1058] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. GeForce GT 610M [1043:1652] Flags: bus master, fast devsel, latency 0, IRQ 35 Memory at db000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=128M] Memory at c8000000 (64-bit, prefetchable) [size=32M] I/O ports at d000 [size=128] Expansion ROM at dc000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel
cat /proc/cmdline:
BOOT_IMAGE=/boot/vmlinuz-4.8.0-26-generic.efi.signed root=UUID=88dbba55-7c41-4022-bc06-5e7b0c3e6413 ro quiet splash vt.handoff=7
答案1
这是我在两台计算机上发现的,一台安装了 Ubuntu 14.04,另一台安装了 16.04。如果安装了未在 CMOS 设置中启用的驱动器,或者设备中缺少驱动器或设备,但在 CMOS 中启用了该驱动器或设备,则 Ubuntu 将无法完全从挂起状态恢复。我不知道为什么会发生这种情况,但两台计算机都无法恢复。一台安装了 SATA 驱动器但未在 CMOS 中启用,而另一台启用了未安装的光学设备。修复这两种情况下的 CMOS 设置都可以解决问题。