Lubuntu 中的什么会导致显示器交替显示模拟/数字并保持黑屏?

Lubuntu 中的什么会导致显示器交替显示模拟/数字并保持黑屏?

2018 年 9 月 18 日 原始帖子

我刚刚从 USB 安装了最新的稳定版 Lubuntu。首先通过 USB 测试,界面可以正常工作,但在我按照要求安装并重新启动后,它默认启动 Lubuntu,我看到了加载屏幕,但随后整个屏幕变黑,只剩下左上角(我认为显示器内置了显示功能)快速交替显示模拟/数字。我无法通过键盘做任何事情,所以最后我只能手动关闭它。

我尝试登录 Lubuntus 的安全模式,但它会自动关闭。我不确定是不是因为过热?我想既然 Lubuntu 占用的内存很少,那么仅仅启动它不会带来风险。Vista 的安全模式似乎不会导致这种情况,而且我知道它更耗资源。


2019年3月20日 回复 DK bose

按照你的指示

jay@KingdomClubs:~$ inxi -Fxxxz
System:    Host: KingdomClubs Kernel: 4.15.0-43-generic i686
           bits: 32 gcc: 7.3.0
           Desktop: LXDE (Openbox 3.6.1) info: lxpanel dm: lightdm
           Distro: Ubuntu 18.04.1 LTS
Machine:   Device: desktop System: HP-Pavilion product: GC674AA-ABA m8120n serial: N/A
           Mobo: ASUSTek model: Basswood3G v: 1.05 serial: N/A
           BIOS: Phoenix v: 5.07 date: 05/24/2007
           Chassis: Hewlett-Packard type: 3 v: 1111 serial: N/A
CPU:       Quad core Intel Core2 Quad (-MCP-) 
           arch: Conroe rev.7 cache: 4096 KB
           flags: (lm nx pae sse sse2 sse3 ssse3 vmx) bmips: 19199
           clock speeds: min/max: 1600/2400 MHz 1: 1599 MHz 2: 1601 MHz
           3: 1599 MHz 4: 1599 MHz
Graphics:  Card: NVIDIA G72 [GeForce 7350 LE]
           bus-ID: 01:00.0 chip-ID: 10de:01d0
           Display Server: x11 (X.Org 1.19.6 )
           drivers: vesa,nouveau (unloaded: modesetting,fbdev)
           Resolution: [email protected]
           OpenGL: renderer: llvmpipe (LLVM 6.0, 128 bits)
           version: 3.3 Mesa 18.0.5 (compat-v: 3.0) Direct Render: Yes
Audio:     Card Intel 82801H (ICH8 Family) HD Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:284b
           Sound: Advanced Linux Sound Architecture v: k4.15.0-43-generic
Network:   Card-1: Intel 82566DC Gigabit Network Connection
           driver: e1000e v: 3.2.6-k port: ff00
           bus-ID: 00:19.0 chip-ID: 8086:104b
           IF: enp0s25 state: down mac: <filter>
           Card-2: Gemtek WUBR-177G [Ralink RT2571W]
           driver: rt73usb v: 2.3.0 usb-ID: 002-002 chip-ID: 15a9:0004
           IF: wlx00c0a8eacdd5 state: N/A speed: N/A duplex: N/A mac: N/A
Drives:    HDD Total Size: 640.1GB (51.3% used)
           ID-1: /dev/sda model: Hitachi_HDT72503 size: 320.1GB
           serial: <filter>
           ID-2: /dev/sdb model: Hitachi_HDT72503 size: 320.1GB
           serial: <filter>
Partition: ID-1: / size: 292G used: 11G (4%) fs: ext4 dev: /dev/dm-0
           ID-2: swap-1 size: 1.03GB used: 0.00GB (0%)
           fs: swap dev: /dev/dm-1
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Sensors:   System Temperatures: cpu: 70.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 189 Uptime: 9 min Memory: 578.3/3024.7MB
           Init: systemd v: 237 runlevel: 5 Gcc sys: N/A
           Client: Shell (bash 4.4.191 running in x-terminal-emul) inxi: 2.3.56 
jay@KingdomClubs:~$ 

这有帮助吗?我不确定这是否有助于识别问题

相关内容