需要获取有关我的传感器、风扇速度等的更多信息

需要获取有关我的传感器、风扇速度等的更多信息

我的传感器在 18.04 中可以正常工作,但在 20.04 中遇到了困难

我安装了传感器并运行传感器检测并选择默认选项。

我很感激有机会了解下一步该做什么。

谢谢。

sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1:         +2.1°C  (high = +70.0°C)
                       (crit = +80.0°C, hyst = +79.0°C)

radeon-pci-0008
Adapter: PCI adapter
temp1:         +2.0°C  (crit = +120.0°C, hyst = +90.0°C)

fam15h_power-pci-00c4
Adapter: PCI adapter
power1:           N/A  (crit =  65.19 W)

还有我的硬件信息。不确定你是否需要其他信息。

sudo dmidecode | more

Base Board Information (Mother board)
    Manufacturer: Gigabyte Technology Co., Ltd.
    Product Name: F2A68HM-H

BIOS Information
        Vendor: American Megatrends Inc.
        Version: FB
        Release Date: 04/22/2015

AMD A8-7600 Radeon R7, 10 Computer Cores 4C+6G x 4

尝试一些成员建议的其他方法:

 E: Package 'hddtemp' has no installation candidate 
    

我尝试了这个来安装 hddtemp。

我试过这个

sudo apt 更新 wget http://archive.ubuntu.com/ubuntu/pool/universe/h/hddtemp/hddtemp_0.3-beta15-53_amd64.deb sudo apt install ./hddtemp_0.3-beta15-53_amd64.deb 并得到下载以 root 身份执行,因为文件 '/home/andy/hddtemp_0.3-beta15-53_amd64.deb' 无法被用户 '_apt' 访问。- pkgAcquire::Run (13:权限被拒绝)

我运行了传感器检测。

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): 
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      Yes
Found `ITE IT8620E Super IO Sensors'                        Success!
    (address 0x228, driver `it87')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): 
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): 

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): 
Using driver `i2c-piix4' for device 0000:00:14.0: AMD Hudson-2 SMBus

Next adapter: SMBus PIIX4 adapter port 0 at 0b00 (i2c-0)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: SMBus PIIX4 adapter port 2 at 0b00 (i2c-1)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: SMBus PIIX4 adapter port 3 at 0b00 (i2c-2)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: SMBus PIIX4 adapter port 4 at 0b00 (i2c-3)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: SMBus PIIX4 adapter port 1 at 0b20 (i2c-4)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: Radeon i2c bit bus 0x90 (i2c-5)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: Radeon i2c bit bus 0x91 (i2c-6)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: Radeon i2c bit bus 0x92 (i2c-7)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: Radeon i2c bit bus 0x93 (i2c-8)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: Radeon i2c bit bus 0x94 (i2c-9)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: Radeon i2c bit bus 0x95 (i2c-10)
Do you want to scan it? (yes/NO/selectively): 

Next adapter: card0-VGA-1 (i2c-11)
Do you want to scan it? (yes/NO/selectively): 


Now follows a summary of the probes I have just done.
Just press ENTER to continue: 

Driver `it87':
  * ISA bus, address 0x228
    Chip `ITE IT8620E Super IO Sensors' (confidence: 9)

Driver `k10temp' (autoloaded):
  * Chip `AMD Family 15h thermal sensors' (confidence: 9)

Driver `fam15h_power' (autoloaded):
  * Chip `AMD Family 15h power sensors' (confidence: 9)

To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
it87
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

Do you want to add these lines automatically to /etc/modules? (yes/NO)

Unloading cpuid... OK

我运行了传感器-f并得到了以下结果:

andy@7 ~/Downloads> sensors -f
fam15h_power-pci-00c4
Adapter: PCI adapter
power1:           N/A  (crit =  65.19 W)

radeon-pci-0008
Adapter: PCI adapter
temp1:        +41.0°F  (crit = +248.0°F, hyst = +194.0°F)

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +39.6°F  (high = +158.0°F)
                       (crit = +176.0°F, hyst = +174.2°F)

it8620-isa-0228
Adapter: ISA adapter
in0:           1.03 V  (min =  +0.00 V, max =  +3.06 V)
in1:           1.54 V  (min =  +0.00 V, max =  +3.06 V)
in2:           2.02 V  (min =  +0.00 V, max =  +3.06 V)
in3:           2.05 V  (min =  +0.00 V, max =  +3.06 V)
in4:           2.04 V  (min =  +0.00 V, max =  +3.06 V)
in5:           2.23 V  (min =  +0.00 V, max =  +3.06 V)
in6:           2.23 V  (min =  +0.00 V, max =  +3.06 V)
3VSB:          3.34 V  (min =  +0.00 V, max =  +6.12 V)
Vbat:          3.17 V  
fan1:        1730 RPM  (min =   10 RPM)
fan2:           0 RPM  (min =    0 RPM)
fan3:         556 RPM  (min =    0 RPM)
fan4:           0 RPM  (min =    0 RPM)
fan5:           0 RPM  (min =    0 RPM)
temp1:        +93.2°F  (low  = +260.6°F, high = +260.6°F)  sensor = thermistor
temp2:       -198.4°F  (low  = +260.6°F, high = +260.6°F)  sensor = disabled
temp3:        +64.4°F  (low  = +32.0°F, high = +140.0°F)  sensor = Intel PECI
temp4:       +109.4°F  
temp5:       +113.0°F  
temp6:       +113.0°F  
intrusion0:  ALARM

答案1

  1. 尝试使用这些命令来安装硬盘温度

    wget http://archive.ubuntu.com/ubuntu/pool/universe/h/hddtemp/hddtemp_0.3-beta15-53_amd64.deb  
    mv hddtemp_0.3-beta15-53_amd64.deb /tmp
    cd /tmp
    sudo apt install ./hddtemp_0.3-beta15-53_amd64.deb
    
  2. 为了传感器首先使用以下命令加载可以读取驱动器温度的内核驱动程序:

    sudo modprobe drivetemp
    

然后运行以下命令:

   sudo sensors-detect
   sensors

答案2

在 20.04 中,hddtemp位于 universe 存储库中。检查以确保已将其添加到您的系统中。

$ apt policy hddtemp
hddtemp:
  Installed: 0.3-beta15-53
  Candidate: 0.3-beta15-53
  Version table:
 *** 0.3-beta15-53 500
        500 [local mirror]/us.archive.ubuntu.com/ubuntu focal/universe amd64 Packages
        100 /var/lib/dpkg/status

在这里添加:

在此处输入图片描述

相关内容