每当我将 Logitech BRIO 网络摄像头插入主板上的任何 USB 端口时,我都会收到以下消息:
当前速率 16000 与运行速率 48000 不同
usb 2-8: new SuperSpeed USB device number 7 using xhci_hcd
usb 2-8: New USB device found, idVendor=046d, idProduct=085e, bcdDevice= 3.17
usb 2-8: New USB device strings: Mfr=0, Product=2, SerialNumber=3
usb 2-8: Product: Logitech BRIO
usb 2-8: Found UVC 1.00 device Logitech BRIO (046d:085e)
input: Logitech BRIO as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input51
usb 2-8: current rate 16000 is different from the runtime rate 24000
usb 2-8: current rate 16000 is different from the runtime rate 32000
usb 2-8: current rate 16000 is different from the runtime rate 48000
input: Logitech BRIO Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.5/0003:046D:085E.0014/input/input52
hid-generic 0003:046D:085E.0014: input,hidraw1: USB HID v1.11 Device [Logitech BRIO] on usb-0000:00:14.0-8/input5
usb 2-8: current rate 16000 is different from the runtime rate 48000
usb 2-8: current rate 16000 is different from the runtime rate 48000
usb 2-8: current rate 16000 is different from the runtime rate 48000
尽管网络摄像头可以工作,但我注意到高分辨率下的帧速率较低。
# inxi --usb
USB:
Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 16 rev: 2.0
Device-1: 1-2:2 info: ASUSTek AURA LED Controller type: HID rev: 2.0
Device-2: 1-3:3 info: Razer USA RZ01-0321 Gaming Mouse [DeathAdder V2]
type: Mouse,Keyboard rev: 2.0
Device-3: 1-4:4 info: Microdia AKKO 3087 type: Keyboard,Mouse rev: 2.0
Hub-2: 1-13:10 info: Genesys Logic Hub ports: 4 rev: 2.0
Device-1: 1-13.3:13 info: Arduino SA Turbo LEDz ODO
type: Abstract (modem),CDC-Data,HID rev: 2.0
Device-2: 1-13.4:12 info: Arduino SA Turbo LEDz 810c
type: Abstract (modem),CDC-Data,HID rev: 2.0
Hub-3: 2-0:1 info: Super-speed hub ports: 9 rev: 3.1
Device-1: 2-8:7 info: Logitech BRIO Ultra HD Webcam type: Video,Audio,HID
rev: 3.1
lsusb 将在设备上报告此情况:
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
操作系统:Ubuntu 22.10
内核:6.2.2