我的便携式磁盘显然出现故障（由于脚本正在向其中写入数据，因此突然不再被检测为磁盘）。
重新启动后它再次出现，让我可以查看数据并确认那里没有真正重要的东西（有备份/是备份/tmp 文件）
dmesg节目
[ 527.769272] usb 2-3: new SuperSpeed Gen 1 USB device number 8 using xhci_hcd
[ 527.782033] usb 2-3: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[ 527.782041] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 527.782047] usb 2-3: Product: USB 3.0 device
[ 527.782052] usb 2-3: Manufacturer: Intenso
[ 527.782058] usb 2-3: SerialNumber: 30200000000000001026
[ 527.787474] scsi host3: uas
[ 527.788340] scsi 3:0:0:0: Direct-Access Intenso USB 3.0 device 0 PQ: 0 ANSI: 6
[ 527.789574] sd 3:0:0:0: [sdb] Spinning up disk...
[ 527.790112] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 528.814988] ..................................................................................................not responding...
[ 648.979675] sd 3:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 648.979684] sd 3:0:0:0: [sdb] Sense Key : Not Ready [current]
[ 648.979689] sd 3:0:0:0: [sdb] Add. Sense: Logical unit is in process of becoming ready
[ 669.829324] sd 3:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 669.829405] sd 3:0:0:0: [sdb] Sense Key : Not Ready [current]
[ 669.829428] sd 3:0:0:0: [sdb] Add. Sense: Logical unit is in process of becoming ready
[ 669.829894] sd 3:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[ 669.829904] sd 3:0:0:0: [sdb] 0-byte physical blocks
lsblk没有列出
在用锤子敲打它（作为一个偏执的人，我更愿意确保数据无法恢复）并将其放入电子垃圾箱之前，我是否应该尝试其他方法？