我组建了一个托管在 apache2 上的网站，并通过 GoDaddy 购买了域名。我可以通过我的域名或 IP 访问该网站，但地址栏会填充我的 IP 地址而不是保留我的域名。我更改了主机名，调整了 /etc/hosts，确保我有一个 @ A 记录……仍然没有运气。有什么建议吗？
编辑：这是我的 apache.conf：
> # This is the main Apache server configuration file. It contains the
> # configuration directives that give the server its instructions.
> # See http://httpd.apache.org/docs/2.4/ for detailed information about
> # the directives and /usr/share/doc/apache2/README.Debian about Debian specific
> # hints.
> #
> #
> # Summary of how the Apache 2 configuration works in Debian:
> # The Apache 2 web server configuration in Debian is quite different to
> # upstream's suggested way to configure the web server. This is because Debian's
> # default Apache2 installation attempts to make adding and removing modules,
> # virtual hosts, and extra configuration directives as flexible as possible, in
> # order to make automating the changes and administering the server as easy as
> # possible.
>
> # It is split into several files forming the configuration hierarchy outlined
> # below, all located in the /etc/apache2/ directory:
> #
> # /etc/apache2/
> # |-- apache2.conf
> # | `-- ports.conf
> # |-- mods-enabled
> # | |-- *.load
> # | `-- *.conf
> # |-- conf-enabled
> # | `-- *.conf
> # `-- sites-enabled
> # `-- *.conf
> #
> #
> # * apache2.conf is the main configuration file (this file). It puts the pieces
> # together by including all remaining configuration files when starting up the
> # web server.
> #
> # * ports.conf is always included from the main configuration file. It is
> # supposed to determine listening ports for incoming connections which can be
> # customized anytime.
> #
> # * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
> # directories contain particular configuration snippets which manage modules,
> # global configuration fragments, or virtual host configurations,
> # respectively.
> #
> # They are activated by symlinking available configuration files from their
> # respective *-available/ counterparts. These should be managed by using our
> # helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
> # their respective man pages for detailed information.
> #
> # * The binary is called apache2. Due to the use of environment variables, in
> # the default configuration, apache2 needs to be started/stopped with
> # /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
> # work with the default configuration.
>
>
> # Global configuration
> #
>
> #
> # ServerRoot: The top of the directory tree under which the server's
> # configuration, error, and log files are kept.
> #
> # NOTE! If you intend to place this on an NFS (or otherwise network)
> # mounted filesystem then please read the Mutex documentation (available
> # at <URL:http://httpd.apache.org/docs/2.4/mod/core.html#mutex>);
> # you will save yourself a lot of trouble.
> #
> # Do NOT add a slash at the end of the directory path.
> #
> #ServerRoot "/etc/apache2"
>
> #
> # The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
> #
> #Mutex file:${APACHE_LOCK_DIR} default
>
> #
> # The directory where shm and other runtime files will be stored.
> #
>
> DefaultRuntimeDir ${APACHE_RUN_DIR}
>
> #
> # PidFile: The file in which the server should record its process
> # identification number when it starts.
> # This needs to be set in /etc/apache2/envvars
> # PidFile ${APACHE_PID_FILE}
>
> #
> # Timeout: The number of seconds before receives and sends time out.
> # Timeout 300
>
> #
> # KeepAlive: Whether or not to allow persistent connections (more than
> # one request per connection). Set to "Off" to deactivate.
> # KeepAlive On
>
> #
> # MaxKeepAliveRequests: The maximum number of requests to allow
> # during a persistent connection. Set to 0 to allow an unlimited amount.
> # We recommend you leave this number high, for maximum performance.
> # MaxKeepAliveRequests 100
>
> #
> # KeepAliveTimeout: Number of seconds to wait for the next request from the
> # same client on the same connection.
> # KeepAliveTimeout 5
>
>
> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP}
>
> #
> # HostnameLookups: Log the names of clients or just their IP addresses
> # e.g., www.apache.org (on) or 204.62.129.132 (off).
> # The default is off because it'd be overall better for the net if people
> # had to knowingly turn this feature on, since enabling it means that
> # each client request will result in AT LEAST one lookup request to the
> # nameserver.
> # HostnameLookups On
>
> # ErrorLog: The location of the error log file.
> # If you do not specify an ErrorLog directive within a <VirtualHost>
> # container, error messages relating to that virtual host will be
> # logged here. If you *do* define an error logfile for a <VirtualHost>
> # container, that host's errors will be logged there and not here.
> # ErrorLog ${APACHE_LOG_DIR}/error.log
>
> #
> # LogLevel: Control the severity of messages logged to the error_log.
> # Available values: trace8, ..., trace1, debug, info, notice, warn,
> # error, crit, alert, emerg.
> # It is also possible to configure the log level for particular modules, e.g.
> # "LogLevel info ssl:warn"
> # LogLevel warn
>
> # Include module configuration: IncludeOptional mods-enabled/*.load IncludeOptional mods-enabled/*.conf
>
> # Include list of ports to listen on Include ports.conf
>
>
> # Sets the default security model of the Apache2 HTTPD server. It does
> # not allow access to the root filesystem outside of /usr/share and /var/www.
> # The former is used by web applications packaged in Debian,
> # the latter may be used for local directories served by the web server. If
> # your system is serving content from a sub-directory in /srv you must allow
> # access here, or in any related virtual host. <Directory /> Options FollowSymLinks AllowOverride None Require all denied </Directory>
>
> <Directory /usr/share> AllowOverride None Require all granted
> </Directory>
>
> <Directory /var/www/> Options Indexes FollowSymLinks AllowOverride
> None Require all granted </Directory>
>
> #<Directory /srv/>
> # Options Indexes FollowSymLinks
> # AllowOverride None
> # Require all granted
> #</Directory>
>
>
>
>
> # AccessFileName: The name of the file to look for in each directory
> # for additional configuration directives. See also the AllowOverride
> # directive.
> # AccessFileName .htaccess
>
> #
> # The following lines prevent .htaccess and .htpasswd files from being
> # viewed by Web clients.
> # <FilesMatch "^\.ht"> Require all denied </FilesMatch>
>
>
> #
> # The following directives define some format nicknames for use with
> # a CustomLog directive.
> #
> # These deviate from the Common Log Format definitions in that they use %O
> # (the actual bytes sent including headers) instead of %b (the size of the
> # requested file), because the latter makes it impossible to detect partial
> # requests.
> #
> # Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
> # Use mod_remoteip instead.
> # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s
> %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t
> \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat
> "%{User-agent}i" agent
>
> # Include of directories ignores editors' and dpkg's backup files,
> # see README.Debian for details.
>
> # Include generic snippets of statements IncludeOptional conf-enabled/*.conf
>
> # Include the virtual host configurations: IncludeOptional sites-enabled/*.conf
>
> # vim: syntax=apache ts=4 sw=4 sts=4 sr noet
编辑：www.myserver.com 正确显示域名，但 myserver.com 仍然显示我的 IP。