我在 Ubuntu 22.04 上使用 USB SoundBlaster Audigy 2 ZS 时遇到问题。
这是我第一次在 Linux 上测试它。
它似乎被检测到了：
cat /proc/asound/cards
0 [sofhdadsp ]: sof-hda-dsp - sof-hda-dsp
LENOVO ...
1 [Editor ]: USB-Audio - SB Audigy 2 ZS Video Editor
Creative Technology Ltd. SB Audigy 2 ZS Video Editor at usb-0000:00:14.0-1.5, f
和 ：
aplay -l
**** Liste des périphériques matériels PLAYBACK **** carte 0 : sofhdadsp [sof-hda-dsp], périphérique 0 : HDA Analog (*) []
Sous-périphériques : 0/1 Sous-périphérique #0 : subdevice #0 carte 0
: sofhdadsp [sof-hda-dsp], périphérique 1 : HDA Digital (*) []
Sous-périphériques : 1/1 Sous-périphérique #0 : subdevice #0 carte 0
: sofhdadsp [sof-hda-dsp], périphérique 3 : HDMI1 (*) []
Sous-périphériques : 1/1 Sous-périphérique #0 : subdevice #0 carte 0
: sofhdadsp [sof-hda-dsp], périphérique 4 : HDMI2 (*) []
Sous-périphériques : 1/1 Sous-périphérique #0 : subdevice #0 carte 0
: sofhdadsp [sof-hda-dsp], périphérique 5 : HDMI3 (*) []
Sous-périphériques : 1/1 Sous-périphérique #0 : subdevice #0 carte 1
: Editor [SB Audigy 2 ZS Video Editor], périphérique 0 : USB Audio
[USB Audio] Sous-périphériques : 0/1 Sous-périphérique #0 :
subdevice #0 carte 1 : Editor [SB Audigy 2 ZS Video Editor],
périphérique 1 : USB Audio [USB Audio #1] Sous-périphériques : 1/1
Sous-périphérique #0 : subdevice #0 carte 1 : Editor [SB Audigy 2 ZS
Video Editor], périphérique 2 : USB Audio [USB Audio #2]
Sous-périphériques : 1/1 Sous-périphérique #0 : subdevice #0
和
系统盘
Bus 003 Device 016: ID 041e:3070 Creative Technology, Ltd
Bus 003 Device 015: ID 041e:3061 Creative Technology, Ltd SoundBlaster Audigy 2 ZS Video Editor
Bus 003 Device 014: ID 041e:3050 Creative Technology, Ltd
但是我没有声音，但我可以选择它并配置不同的 mod 5.1 ... VLC 看到它，我可以选择它。
在 /var/log 上，我有以下错误消息：
pulseaudio[2083]: Volume element 'Headphone' has 9 channels. That's too much! I can't handle that!
kernel: [441712.418905] usb 3-3.1.5: 2:10: usb_set_interface failed (-32) **-> multiple time**
systemd-udevd[1169172]: controlC1: Process '/usr/sbin/alsactl -E HOME=/run/alsa -E XDG_RUNTIME_DIR=/run/alsa/runtime restore 1' failed with exit code 99.
当我连接它时：
kernel: [442938.834466] usb 3-1.5: new full-speed USB device number 43 using xhci_hcd
kernel: [442938.940075] usb 3-1.5: New USB device found, idVendor=041e, idProduct=3061, bcdDevice= 1.00
kernel: [442938.940081] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
kernel: [442938.940084] usb 3-1.5: Product: SB Audigy 2 ZS Video Editor
kernel: [442938.940086] usb 3-1.5: Manufacturer: Creative Technology Ltd.
kernel: [442938.969725] usb 3-1.5: 3:2 : format type 0 is detected, processed as PCM
kernel: [442939.190095] usb 3-1.5: 3:3 : format type 0 is detected, processed as PCM
kernel: [442939.398448] usb 3-1.5: 3:4 : format type 0 is detected, processed as PCM
kernel: [442939.619329] usb 3-1.5: 3:5 : format type 0 is detected, processed as PCM
kernel: [442939.827932] usb 3-1.5: 3:6 : format type 0 is detected, processed as PCM
kernel: [442940.465603] usb 3-1.5: 3:2 : format type 0 is detected, processed as PCM
kernel: [442940.465612] usb 3-1.5: 3:3 : format type 0 is detected, processed as PCM
kernel: [442940.465614] usb 3-1.5: 3:4 : format type 0 is detected, processed as PCM
kernel: [442940.465616] usb 3-1.5: 3:5 : format type 0 is detected, processed as PCM
kernel: [442940.465618] usb 3-1.5: 3:6 : format type 0 is detected, processed as PCM
kernel: [442940.836943] usb 3-1.5: Warning! Unlikely big volume range (=960), cval->res is probably wrong.
kernel: [442940.836946] usb 3-1.5: [31] FU [Delay Control] ch = 9, val = 0/960/1*
当我连接电源时，蓝色 LED 开始闪烁。通常它必须保持亮着。
光纤输出闪烁一点，我认为是数据交换。
你知道这些错误吗？
提前谢谢
David