当我启动时,所有内容都会显示在我的笔记本电脑屏幕上,直到桌面环境开始加载,之后我只剩下
starting version 235
AntergosRoot: clean, 623842/30138368 files, 17962021/120534016 blocks
我的笔记本电脑屏幕上有文字,但在我的外接显示器上一切正常。如果我按 Ctrl-Alt-F2,我可以在笔记本电脑屏幕上看到一个 shell,但我的外接显示器变黑,如果不重新启动就无法将其恢复。我怀疑这与显卡有关,因为这就是显卡损坏时我试图做的事情。 (我认为是nvidia-installer
antergos 软件包破坏了它。)如果我在断开外部显示器的情况下启动,笔记本电脑显示屏仍然无法工作。这是我的系统配置:
OS: Antergos Linux x86_64
Host: Latitude E6430 01
Kernal: 4.14.3-1-ARCH
Resolution: 1280x1024
DE: KDE
WM: KWin
CPU: Intel i7-3740QM (8) @ 3.700GHz
GPU: Intel Integrated Graphics
GPU: NVIDIA NVS 5200M
Memory: 5842MiB
lspci
给出以下输出:
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 7 Series/C210 Series Chipset Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (Lewisville) (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 4 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108GLM [NVS 5200M] (rev a1)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)
0c:00.0 SD Host controller: O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller (rev 05)
当它崩溃时,我最初想做的是探索混合图形的雷区,最终决定删除nvidia
,nouveau
并bumblebee
支持该nvidia-installer
软件包以及antergos-prime
.
答案1
删除所有 nvidia 驱动程序,重新安装,然后删除 xorg.conf.d。