我正在尝试将我的三个显示器设置为一天左右，但我找不到任何解决方案
当我尝试在 nvidia 设置中进行设置时，它不起作用，主显示器变成 HDMI-0.. 即使仅在 DVI-D-0 显示器上选中“设置主显示器”复选框
我尝试了很多不同的事情，比如绝对负面立场，但没有成功：
DVI-D-0 @ 0,0
DP-1 @ -1920,0
HDMI-0 @ -3840, 0
我的 xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 390.77 (buildmeister@swio-display-x64-rhel04-14) Tue Jul 10 23:18:15 PDT 2018
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 390.77 (buildmeister@swio-display-x64-rhel04-14) Tue Jul 10 23:19:22 PDT 2018
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "BenQ XL2411Z"
HorizSync 30.0 - 160.0
VertRefresh 56.0 - 144.0
Option "DPMS"
Option "Primary" "yes"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 1060 6GB"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-0"
Option "metamodes" "DVI-D-0: 1920x1080_120 +0+0, DP-1: 1920x1080 +1920+0, HDMI-0: nvidia-auto-select +3840+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
谢谢