[martin@A08-R32-I196-2-FZ1RLP2 ~]$ sudo lshw -C display
*-display UNCLAIMED
description: 3D controller
product: NVIDIA Corporation
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:04:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress cap_list
configuration: latency=0
resources: iomemory:3a00-39ff iomemory:3a80-3a7f memory:92000000-92ffffff memory:3a000000000-3a7ffffffff memory:3a800000000-3a801ffffff
*-display UNCLAIMED
description: 3D controller
product: NVIDIA Corporation
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:02:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress cap_list
configuration: latency=0
resources: iomemory:3b00-3aff iomemory:3b80-3b7f memory:91000000-91ffffff memory:3b000000000-3b7ffffffff memory:3b800000000-3b801ffffff
*-display
description: VGA compatible controller
product: G200eR2
vendor: Matrox Electronics Systems Ltd.
physical id: 0
bus info: pci@0000:09:00.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pm vga_controller bus_master cap_list rom
configuration: driver=mgag200 latency=0 maxlatency=32 mingnt=16
resources: irq:17 memory:90000000-90ffffff memory:93800000-93803fff memory:93000000-937fffff
*-display UNCLAIMED
description: 3D controller
product: NVIDIA Corporation
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:83:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress cap_list
configuration: latency=0
resources: iomemory:3e00-3dff iomemory:3e80-3e7f memory:cd000000-cdffffff memory:3e000000000-3e7ffffffff memory:3e800000000-3e801ffffff
*-display UNCLAIMED
description: 3D controller
product: NVIDIA Corporation
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:84:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress cap_list
configuration: latency=0
resources: iomemory:3f00-3eff iomemory:3f80-3f7f
如果有的话,型号是什么?
根据建议编辑:
[martin@A08-R32-I196-2-FZ1RLP2 anaconda3]$ lspci -vvv | head
00:00.0 Host bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DMI2 (rev 01)
Subsystem: Intel Corporation Device 0000
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 0
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 1 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
答案1
lshw
您能否获得有意义的产品/供应商详细信息可能会受到影响。在你的情况下,你得到的结果好坏参半。 NVidia 硬件太通用了,Matrox 似乎很清楚它是什么硬件版本:
product: NVIDIA Corporation
vendor: NVIDIA Corporation
product: G200eR2
vendor: Matrox Electronics Systems Ltd.
我用这个来代替,运气更好lspci
:
$ lspci -vvv | head
...
00:02.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 06) (prog-if 00 [VGA controller])
DeviceName: Onboard IGD
Subsystem: ASUSTeK Computer Inc. Skylake Integrated Graphics
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 128
Region 0: Memory at f6000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [40] Vendor Specific Information: Len=0c <?>
Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0800c Data: 4142
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] #1b
Capabilities: [200 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 00
ATSCtl: Enable-, Smallest Translation Unit: 00
Capabilities: [300 v1] #13
Kernel driver in use: i915_bpo
Kernel modules: i915_bpo
The key thing to do with `lspci`
如您所见,上面有关于显卡的更多详细信息。
答案2
请进入 BIOS 设置以确保启用专用 GPU。如果在 BIOS 中错误地禁用了专用 GPU。 Commondlspci
不会显示 GPU 详细信息。
一旦确定启用了专用 GPU,请执行 slm 建议的步骤