在我的 Raspberry Pi 上，它已经运行了大约 4 或 5 年了，我每小时运行一个 cron 作业来设置时间。根据我的经验，我知道我的 Pi 运行时间越长，其时间就越容易漂移，所以我找到了一个可以重置它的脚本。多年来它一直工作得很好，突然间就不再工作了。 ntp.conf 在这里：
# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
driftfile /var/lib/ntp/ntp.drift
# Enable this if you want statistics to be logged.
#statsdir /var/log/ntpstats/
statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
filegen peerstats file peerstats type day enable
filegen clockstats file clockstats type day enable
# You do need to talk to an NTP server or two (or three).
#server ntp.your-provider.example
# pool.ntp.org maps to about 1000 low-stratum NTP servers. Your server will
# pick a different set every time it starts up. Please consider joining the
# pool: <http://www.pool.ntp.org/join.html>
server 0.uk.pool.ntp.org iburst
server 1.uk.pool.ntp.org iburst
server 2.uk.pool.ntp.org iburst
server 3.uk.pool.ntp.org iburst
# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
# details. The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
# might also be helpful.
#
# Note that "restrict" applies to both servers and clients, so a configuration
# that might be intended to block requests from certain clients could also end
# up blocking replies from your own upstream servers.
# By default, exchange time with everybody, but don't allow configuration.
restrict -4 default kod notrap nomodify nopeer noquery
restrict -6 default kod notrap nomodify nopeer noquery
# Local users may interrogate the ntp server more closely.
#restrict 127.0.0.1
#restrict ::1
# Clients from this (example!) subnet have unlimited access, but only if
# cryptographically authenticated.
#restrict 192.168.123.0 mask 255.255.255.0 notrust
# If you want to provide time to your local subnet, change the next line.
# (Again, the address is an example only.)
#broadcast 192.168.123.255
# If you want to listen to time broadcasts on your local subnet, de-comment the
# next lines. Please do this only if you trust everybody on the network!
#disable auth
#broadcastclient
我的 cron 作业运行这个脚本：
#! /bin/bash
/etc/init.d/ntp stop
ntpd -q -g
/etc/init.d/ntp start
现在，当运行 ntp -q -g 命令时，我收到这组消息并且它永远不会退出：
14 Nov 05:43:23 ntpd[1577]: ntpd [email protected] Sat Mar 10 18:03:33 UTC 2018(1): Starting
14 Nov 05:43:23 ntpd[1577]: Command line: ntpd -q -g
14 Nov 05:43:23 ntpd[1577]: proto: precision = 3.000 usec (-18)
restrict 0.0.0.0: KOD does nothing without LIMITED.
14 Nov 05:43:23 ntpd[1577]: restrict 0.0.0.0: KOD does nothing without LIMITED.
restrict ::: KOD does nothing without LIMITED.
14 Nov 05:43:23 ntpd[1577]: restrict ::: KOD does nothing without LIMITED.
14 Nov 05:43:23 ntpd[1577]: Listen and drop on 0 v6wildcard [::]:123
14 Nov 05:43:23 ntpd[1577]: Listen and drop on 1 v4wildcard 0.0.0.0:123
14 Nov 05:43:23 ntpd[1577]: Listen normally on 2 lo 127.0.0.1:123
14 Nov 05:43:23 ntpd[1577]: Listen normally on 3 eth0 192.168.0.42:123
14 Nov 05:43:23 ntpd[1577]: Listen normally on 4 lo [::1]:123
14 Nov 05:43:23 ntpd[1577]: Listen normally on 5 eth0 [2a02:c7f:9665:6900:ba27:ebff:fe24:90a5]:123
14 Nov 05:43:23 ntpd[1577]: Listen normally on 6 eth0 [fd57:5132:3318:0:ba27:ebff:fe24:90a5]:123
14 Nov 05:43:23 ntpd[1577]: Listen normally on 7 eth0 [fe80::ba27:ebff:fe24:90a5%2]:123
14 Nov 05:43:23 ntpd[1577]: Listening on routing socket on fd #24 for interfaceupdates
有任何想法吗？如果我想让 Pi 时钟同步到时间服务器，最简单的方法是什么？