RPM 规范补丁应用程序失败

Question

我有一个 spec 文件，无需补丁即可编译：

build@SLES11SP4-185:~/rpmbuild/SPECS> cat testSoftware.spec
#
# This file and all modifications and additions to the pristine
# package are under the same license as the package itself.
#

# norootforbuild

Name:            testSoftware
Version:         1.0
Release:         2
Summary:         Demo - patch
Group:           Deployment
License:         GPLv2
Url:             www.dell.com
#PreReq:
#Provides:
#BuildRequires:
Source:          testSoftware.tar.gz
patch0:          test1.patch
BuildRoot:      %{_tmppath}/%{name}-%{version}-build
AutoReqProv:    on

%description

Authors:
--------
    Raj Kumar
%prep
%setup -q

%build

%install
mkdir -p $RPM_BUILD_ROOT/opt/testSoftware

install test1.sh $RPM_BUILD_ROOT/opt/testSoftware
install test2.sh $RPM_BUILD_ROOT/opt/testSoftware

%patch -P 0
%clean
rm -rf $RPM_BUILD_ROOT


%post
%postun

%files
/opt/testSoftware/test1.sh
/opt/testSoftware/test2.sh
%defattr(-,root,root,0755)

我的 SOURCES 目录有 test1.patch 和 *.tar.gz

build@SLES11SP4-185:~/rpmbuild/SOURCES> ls
testSoftware.tar.gz
test1.patch   testSoftware-1.0  

这是 test1.patch

build@SLES11SP4-185:~/rpmbuild/SOURCES> cat test1.patch
--- testSoftware-1.0/test1.sh   2016-08-20 04:49:19.000000000 -0400
+++ test1.sh    2016-08-20 05:33:45.000000000 -0400
@@ -1 +1 @@
-Hello - Test1
+Test1 - Test1 - patch

当我运行 spec 文件时，它失败了：

build@SLES11SP4-185:~/rpmbuild/SPECS> rpmbuild -bb testSoftware.spec
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.10960
+ umask 022
+ cd /home/build/rpmbuild/BUILD
+ cd /home/build/rpmbuild/BUILD
+ rm -rf testSoftware-1.0
+ /usr/bin/gzip -dc /home/build/rpmbuild/SOURCES/testSoftware.tar.gz
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd testSoftware-1.0
++ /usr/bin/id -u
+ '[' 1001 = 0 ']'
++ /usr/bin/id -u
+ '[' 1001 = 0 ']'
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.10960
+ umask 022
+ cd /home/build/rpmbuild/BUILD
+ /bin/rm -rf /var/tmp/testSoftware-1.0-build
++ dirname /var/tmp/testSoftware-1.0-build
+ /bin/mkdir -p /var/tmp
+ /bin/mkdir /var/tmp/testSoftware-1.0-build
+ cd testSoftware-1.0
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.10960
+ umask 022
+ cd /home/build/rpmbuild/BUILD
+ cd testSoftware-1.0
+ mkdir -p /var/tmp/testSoftware-1.0-build/opt/testSoftware
+ install test1.sh /var/tmp/testSoftware-1.0-build/opt/testSoftware
+ install test2.sh /var/tmp/testSoftware-1.0-build/opt/testSoftware
+ %patch -P 0
/var/tmp/rpm-tmp.10960: line 28: fg: no job control
error: Bad exit status from /var/tmp/rpm-tmp.10960 (%install)


RPM build errors:
    Bad exit status from /var/tmp/rpm-tmp.10960 (%install)

有人能告诉我这是什么问题吗？