编辑:该问题已通过新的 Fedora 27 更新自行修复。
免责声明:我尝试在 ask Fedora 上询问这个问题,但由于内部服务器错误而无法登录。
我昨晚从 Fedora 25 升级到了 Fedora 26,从那以后我就无法使用 wifi 了。
我安装了最新的 rpm fusion nonfree,并安装了 akmod-wl,但没成功。更新时,我收到一条警告,提示有两个不兼容的软件包将在安装过程中被删除。其中一个是 MySQL Workbench,另一个我不确定,但我认为可能是 akmod-wl。
这是我的无线网卡的 lspci 输出:
07:00.0 Network controller: Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe
运行 ifconfig 报告 3 个接口:
$ ifconfig
enp1s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.65 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 2806:105e:4:be65:ed82:5646:cd48:f5bf prefixlen 64 scopeid 0x0<global>
inet6 fdf4:dcf9:823a:7a00:95a2:28d3:a2b8:ee7b prefixlen 64 scopeid 0x0<global>
inet6 2806:105e:4:be65::2 prefixlen 128 scopeid 0x0<global>
inet6 fe80::4da4:f2e9:b18c:dafd prefixlen 64 scopeid 0x20<link>
ether 78:e3:b5:62:40:56 txqueuelen 1000 (Ethernet)
RX packets 1448 bytes 570458 (557.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1881 bytes 279806 (273.2 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 36 bytes 3124 (3.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 36 bytes 3124 (3.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:bc:d3:e3 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
IP 地址报告 wlo1 已关闭:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 78:e3:b5:62:40:56 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.65/24 brd 192.168.1.255 scope global dynamic enp1s0
valid_lft 85212sec preferred_lft 85212sec
inet6 2806:105e:4:be65::2/128 scope global dynamic
valid_lft 6015sec preferred_lft 2415sec
inet6 fdf4:dcf9:823a:7a00:95a2:28d3:a2b8:ee7b/64 scope global noprefixroute dynamic
valid_lft 7030sec preferred_lft 3430sec
inet6 2806:105e:4:be65:ed82:5646:cd48:f5bf/64 scope global noprefixroute dynamic
valid_lft 7030sec preferred_lft 3430sec
inet6 fe80::4da4:f2e9:b18c:dafd/64 scope link
valid_lft forever preferred_lft forever
3: wlo1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 60:d8:19:8b:37:3a brd ff:ff:ff:ff:ff:ff
4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
link/ether 52:54:00:bc:d3:e3 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
5: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc fq_codel master virbr0 state DOWN group default qlen 1000
link/ether 52:54:00:bc:d3:e3 brd ff:ff:ff:ff:ff:ff
知道我该怎么做才能让 wifi 重新工作吗?在更新到 Fedora 26 之前,wifi 工作正常。
答案1
Fedora 27 修复了这个问题。但仍然不确定问题的根源是什么。
答案2
如果你已经安装了 git,请在你的终端上运行此代码以克隆 repo 并启动自动安装脚本:
git 克隆https://github.com/FreedomBen/rtl8188ce-linux-driver.git&& cd rtl8188ce-linux-driver
&&./install.s
这应该可以解决你的Wifi Drivers
问题
来源:GitHub