所以我刚刚在我的 Dell XPS 9370 上安装了 Parrot Security OS，它运行的是以下 wifi 芯片组 02:00.0 网络控制器：
Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32)但是我无法让 wifi 正常工作。当我第一次登录时，会弹出一个窗口，上面写着 wifi 网络可用，但单击它没有任何作用。似乎也没有显示可用网络的 wifi 小程序。我尝试过在线下载 wifi 芯片组的固件，但也没有解决问题。
下面是一些系统日志，它们可能对某些人有指示作用，但对我来说却没有！
Jan 21 18:44:39 parrot kernel: [ 355.053941] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 21 18:44:39 parrot NetworkManager[835]: <info> [1548096279.5974] device (wlan0): supplicant interface state: ready -> disabled
Jan 21 18:44:39 parrot NetworkManager[835]: <info> [1548096279.6158] device (wlan0): supplicant interface state: disabled -> inactive
Jan 21 18:44:39 parrot wpa_supplicant[834]: wlan0: Reject scan trigger since one is already pending
Jan 21 18:47:46 parrot wpa_supplicant[834]: nl80211: deinit ifname=p2p-dev-wlan0 disabled_11b_rates=0
Jan 21 18:47:46 parrot NetworkManager[2293]: <info> [1548096466.3396] wifi-nl80211: (wlan0): using nl80211 for WiFi device control
Jan 21 18:47:46 parrot wpa_supplicant[834]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Jan 21 18:47:46 parrot NetworkManager[2293]: <info> [1548096466.5779] device (wlan0): driver supports Access Point (AP) mode
Jan 21 18:47:46 parrot NetworkManager[2293]: <info> [1548096466.5784] manager: (wlan0): new 802.11 WiFi device (/org/freedesktop/NetworkManager/Devices/3)
Jan 21 18:47:46 parrot NetworkManager[2293]: <info> [1548096466.5796] device (wlan0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Jan 21 18:47:46 parrot kernel: [ 542.054412] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 21 18:47:46 parrot NetworkManager[2293]: <info> [1548096466.6670] device (wlan0): set-hw-addr: set MAC address to F6:E2:57:AC:D5:BD (scanning)
Jan 21 18:47:47 parrot kernel: [ 542.887547] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 21 18:47:47 parrot NetworkManager[2293]: <info> [1548096467.4225] device (wlan0): supplicant interface state: init -> starting
Jan 21 18:47:47 parrot NetworkManager[2293]: <info> [1548096467.5267] sup-iface[0x5612780340c0,wlan0]: supports 5 scan SSIDs
Jan 21 18:47:47 parrot NetworkManager[2293]: <info> [1548096467.5289] device (wlan0): supplicant interface state: starting -> ready
Jan 21 18:47:47 parrot NetworkManager[2293]: <info> [1548096467.5290] device (wlan0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Jan 21 18:47:47 parrot kernel: [ 543.003938] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready```
答案1
我知道这有点晚了，但我在网上搜索了同样的问题，你的帖子给了我所需要的线索。
在菜单“系统->首选项->硬件->显示”下，您可以设置分辨率。我不得不花点时间调试一下，我的网络管理器才显示出来。奇怪的是，Parrot 不能很好地处理高分辨率。