我正在尝试克隆具有多个分区的驱动器(使用旧的实时 DVD);但是,结果是扩展分区为空。这是命令和结果:
mint@mint ~ $ sudo ddrescue -fnv /dev/sda /dev/sdb /home/mint/resc.log
GNU ddrescue 1.19
About to copy 320072 MBytes from /dev/sda to /dev/sdb.
Starting positions: infile = 0 B, outfile = 0 B
Copy block size: 128 sectors Initial skip size: 128 sectors
Sector size: 512 Bytes
Press Ctrl-C to interrupt
rescued: 320072 MB, errsize: 0 B, current rate: 13918 kB/s
ipos: 320072 MB, errors: 0, average rate: 18668 kB/s
opos: 320072 MB, run time: 4.76 h, successful read: 0 s ago
Finished
Disk /dev/sda: 298.1 GiB, 320072933376 bytes, 625142448 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xefa8efa8
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 24578047 24576000 11.7G 27 Hidden NTFS WinRE
/dev/sda2 * 24578048 24782847 204800 100M 7 HPFS/NTFS/exFAT
/dev/sda3 24782848 137422847 112640000 53.7G 7 HPFS/NTFS/exFAT
/dev/sda4 137422848 625141759 487718912 232.6G 5 Extended
/dev/sda5 137424896 149712895 12288000 5.9G 82 Linux swap / Solaris
/dev/sda6 149714944 625141759 475426816 226.7G 83 Linux
Disk /dev/sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xefa8efa8
Device Boot Start End Sectors Size Id Type
/dev/sdb1 2048 24578047 24576000 11.7G 27 Hidden NTFS WinRE
/dev/sdb2 * 24578048 24782847 204800 100M 7 HPFS/NTFS/exFAT
/dev/sdb3 24782848 137422847 112640000 53.7G 7 HPFS/NTFS/exFAT
/dev/sdb4 137422848 625141759 487718912 232.6G 5 Extended
或者在 gparted 中:
https://funkyimg.com/i/36ns9.jpg https://funkyimg.com/i/36ns7.jpg
日志文件没有显示任何值得注意的内容:
# Rescue Logfile. Created by GNU ddrescue version 1.19
# Command line: ddrescue -fnv /dev/sda /dev/sdb /home/mint/resc.log
# Start time: 2020-07-19 03:11:04
# Current time: 2020-07-19 07:56:48
# Finished
# current_pos current_status
0x4A85D50000 +
# pos size status
0x00000000 0x4A85D56000 +
我找不到任何关于扩展分区特殊处理的说明。我是否遗漏了什么,或者有更好的方法吗?