所以我的联想ideapad s340运行linux mint 19.3 cinnamon 64位5.3.0-28-generic。 (笔记本电脑已经用了 3 天,没有操作系统 [只有 BIOS],我在第一次启动时安装了 mint)。
GPU 是 Intel UHD 620(无 Nvidia),驱动程序管理器显示没有 Intel 驱动程序,它只显示空白屏幕并显示“没有使用专有驱动程序”。
我的笔记本电脑甚至无法识别 HDMI 端口的存在(当我运行 xrandr 时,它不会出现在那里),并且显示设置仅显示笔记本电脑的主显示器,尽管有一个功能齐全的显示器正确插入 HDMI 端口(尝试了 3 个显示器,包括1台电视),显示器只显示“无信号”
aplay -l 输出:
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC257 Analog [ALC257 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4]
Subdevices: 1/1
Subdevice #0: subdevice #0
xrandr 输出:
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis)
344mm x 194mm
1920x1080 59.98 + 59.97* 59.96 59.93
1680x1050 59.95 59.88
1600x1024 60.17
1400x1050 59.98
1600x900 59.99 59.94 59.95 59.82
1280x1024 60.02
1440x900 59.89
1400x900 59.96 59.88
1280x960 60.00
1440x810 60.00 59.97
1368x768 59.88 59.85
1360x768 59.80 59.96
1280x800 59.99 59.97 59.81 59.91
1152x864 60.00
1280x720 60.00 59.99 59.86 59.74
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
960x540 59.96 59.99 59.63 59.82
800x600 60.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
800x512 60.17
700x525 59.98
800x450 59.95 59.82
640x512 60.02
720x450 59.89
700x450 59.96 59.88
640x480 60.00 59.94
720x405 59.51 58.99
684x384 59.88 59.85
680x384 59.80 59.96
640x400 59.88 59.98
576x432 60.06
640x360 59.86 59.83 59.84 59.32
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32 56.34
432x243 59.92 59.57
320x240 60.05
360x202 59.51 59.13
320x180 59.84 59.32
DP-1 disconnected (normal left inverted right x axis y axis)
答案1
尝试在 BIOS 中将启动模式从传统模式更改为 UEFI。启动时按 F2 即可访问 BIOS。
答案2
解决方案:
命令
sudo strings /sys/firmware/acpi/tables/DSDT | grep -i 'windows ' | sort
列出了几个 Windows 选项,最新的是“Windows 2018”,所以我使用以下命令编辑了 grub 菜单
xed admin:///etc/default/grub
去了线:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
并添加了
acpi_osi=! \"acpi_osi=Windows 2018\" ,
将行更改为:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=! \"acpi_osi=Windows 2018\""
之后我运行“sudo update-grub”并重新启动计算机。
然后我进入 BIOS 并将设置“启动模式”从“传统支持”更改为“UEFI”,现在它可以工作了