我需要通过 ubuntu 服务器 (10.15.0.12) 访问 win10 机器 (10.7.3.23)。通过 VPN，我可以访问 ubuntu 服务器，但不能访问 win10 机器。ubuntu 服务器可以通过端口 3389 访问 Win10 机器。从内部网络，RDP 访问 win10 机器是可行的。我目前所做的：网络防火墙在端口 3389 上打开。在 ubuntu 服务器上：
我在ufw上开放了3389端口：
sudo ufw status
To Action From
-- ------ ----
...
3389/tcp ALLOW Anywhere
3389/udp ALLOW Anywhere
10.7.3.0/24 22 ALLOW OUT Anywhere
10.7.3.0/24 3389 ALLOW OUT Anywhere ```
The first two lines allow the incoming access from vpn. the last two lines allow the access from ubuntu-server to win10-machine.
I added the following lines at /etc/ufw/before.rules to route the access 3389 to the win 10 machine (10.7.3.23).
```*nat
:PREROUTING ACCEPT [0:0]
#forward rdp to cbs-rechner
-A PREROUTING -i eno1 -p tcp --dport 3389 -j DNAT \ --to-destination 10.7.3.23:3389
-A PREROUTING -i eno1 -p udp --dport 3389 -j DNAT \ --to-destination 10.7.3.23:3389
#setup routing
-A FORWARD -p tcp --dport 3389 -j ACCEPT
-A FORWARD -p udp --dport 3389 -j ACCEPT
# don't delete the 'COMMIT' line or these rules won't be processed
COMMIT
的输出sudo iptables -nL是
Chain INPUT (policy DROP)
target prot opt source destination
ufw-before-logging-input all -- 0.0.0.0/0 0.0.0.0/0
ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0
ufw-after-input all -- 0.0.0.0/0 0.0.0.0/0
ufw-after-logging-input all -- 0.0.0.0/0 0.0.0.0/0
ufw-reject-input all -- 0.0.0.0/0 0.0.0.0/0
ufw-track-input all -- 0.0.0.0/0 0.0.0.0/0
Chain FORWARD (policy DROP)
target prot opt source destination
ufw-before-logging-forward all -- 0.0.0.0/0 0.0.0.0/0
ufw-before-forward all -- 0.0.0.0/0 0.0.0.0/0
ufw-after-forward all -- 0.0.0.0/0 0.0.0.0/0
ufw-after-logging-forward all -- 0.0.0.0/0 0.0.0.0/0
ufw-reject-forward all -- 0.0.0.0/0 0.0.0.0/0
ufw-track-forward all -- 0.0.0.0/0 0.0.0.0/0
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
ufw-before-logging-output all -- 0.0.0.0/0 0.0.0.0/0
ufw-before-output all -- 0.0.0.0/0 0.0.0.0/0
ufw-after-output all -- 0.0.0.0/0 0.0.0.0/0
ufw-after-logging-output all -- 0.0.0.0/0 0.0.0.0/0
ufw-reject-output all -- 0.0.0.0/0 0.0.0.0/0
ufw-track-output all -- 0.0.0.0/0 0.0.0.0/0
Chain ufw-after-forward (1 references)
target prot opt source destination
Chain ufw-after-input (1 references)
target prot opt source destination
...
ufw-skip-to-policy-input all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type BROADCAST
Chain ufw-after-logging-forward (1 references)
target prot opt source destination
LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix "[UFW BLOCK] "
Chain ufw-after-logging-input (1 references)
target prot opt source destination
LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix "[UFW BLOCK] "
Chain ufw-after-logging-output (1 references)
target prot opt source destination
Chain ufw-after-output (1 references)
target prot opt source destination
Chain ufw-before-forward (1 references)
target prot opt source destination
ufw-user-forward all -- 0.0.0.0/0 0.0.0.0/0
Chain ufw-before-input (1 references)
target prot opt source destination
ufw-user-input all -- 0.0.0.0/0 0.0.0.0/0
Chain ufw-before-logging-forward (1 references)
target prot opt source destination
Chain ufw-before-logging-input (1 references)
target prot opt source destination
Chain ufw-before-logging-output (1 references)
target prot opt source destination
Chain ufw-before-output (1 references)
target prot opt source destination
ufw-user-output all -- 0.0.0.0/0 0.0.0.0/0
Chain ufw-logging-allow (0 references)
target prot opt source destination
LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix "[UFW ALLOW] "
Chain ufw-logging-deny (0 references)
target prot opt source destination
RETURN all -- 0.0.0.0/0 0.0.0.0/0 ctstate INVALID limit: avg 3/min burst 10
LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix "[UFW BLOCK] "
Chain ufw-reject-forward (1 references)
target prot opt source destination
Chain ufw-reject-input (1 references)
target prot opt source destination
Chain ufw-reject-output (1 references)
target prot opt source destination
Chain ufw-skip-to-policy-forward (0 references)
target prot opt source destination
DROP all -- 0.0.0.0/0 0.0.0.0/0
Chain ufw-skip-to-policy-input (7 references)
target prot opt source destination
DROP all -- 0.0.0.0/0 0.0.0.0/0
Chain ufw-skip-to-policy-output (0 references)
target prot opt source destination
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
Chain ufw-track-forward (1 references)
target prot opt source destination
Chain ufw-track-input (1 references)
target prot opt source destination
Chain ufw-track-output (1 references)
target prot opt source destination
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 ctstate NEW
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 ctstate NEW
Chain ufw-user-forward (1 references)
target prot opt source destination
Chain ufw-user-input (1 references)
target prot opt source destination
...
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:3389
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:3389
Chain ufw-user-limit (0 references)
target prot opt source destination
LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 5 LOG flags 0 level 4 prefix "[UFW LIMIT BLOCK] "
REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable
Chain ufw-user-limit-accept (0 references)
target prot opt source destination
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
Chain ufw-user-logging-forward (0 references)
target prot opt source destination
Chain ufw-user-logging-input (0 references)
target prot opt source destination
Chain ufw-user-logging-output (0 references)
target prot opt source destination
Chain ufw-user-output (1 references)
target prot opt source destination
...
ACCEPT tcp -- 0.0.0.0/0 10.7.3.0/24 tcp dpt:3389
ACCEPT udp -- 0.0.0.0/0 10.7.3.0/24 udp dpt:3389
为了连接到 win10 计算机上的 RDP，我拨入 vpn 并使用 windows 的 rdp-connection-software： RDP 连接软件中的设置
我也尝试了 socat 命令，但没有成功。
socat -d TCP4-LISTEN:3389,reuseaddr TCP4:10.7.3.23:3389
有人知道如何获取/调试连接吗？提前谢谢