OpenSSH - HP NA 上的跳转主机无法正常工作

OpenSSH - HP NA 上的跳转主机无法正常工作

我想问一下你们中是否有人在通过 HPNA 堡垒主机建立远程 SSH 连接时遇到类似的问题。

到目前为止,我实现的是调试模式的通知:debug1:通道0:新的[stdio-forward] debug1:getpeername失败:错误的文件描述符debug1:进入交互式会话。 debug1:承诺:网络通道0:打开失败:管理禁止:用户没有权限stdio转发失败ssh_exchange_identification:连接被远程主机关闭

我可以对 HPNA 堡垒主机进行身份验证,但由于某种原因,无法通过跳转主机进一步到达目标主机。


这是连接到远程设备的完整输出。出于安全原因,我更改了 HPNA 和目标主机的 IP 地址。

OpenSSH_7.6p1 Ubuntu-4ubuntu0.3, OpenSSL 1.0.2n  7 Dec 2017
debug1: Reading configuration data /home/lab/.ssh/config
debug1: /home/lab/.ssh/config line 12: Applying options for SRX
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug1: Setting implicit ProxyCommand from ProxyJump: ssh -vvv -W '[%h]:%p' my_HPNA_IP
debug1: Executing proxy command: exec ssh -vvv -W '[my_dest_host]:22' my_HPNA_IP
debug1: permanently_drop_suid: 1000
debug1: identity file /home/lab/.ssh/id_rsa type 0
debug1: key_load_public: No such file or directory
debug1: identity file /home/lab/.ssh/id_rsa-cert type -1
debug1: key_load_public: No such file or directory
debug1: identity file /home/lab/.ssh/id_dsa type -1
debug1: key_load_public: No such file or directory
debug1: identity file /home/lab/.ssh/id_dsa-cert type -1
debug1: key_load_public: No such file or directory
debug1: identity file /home/lab/.ssh/id_ecdsa type -1
debug1: key_load_public: No such file or directory
debug1: identity file /home/lab/.ssh/id_ecdsa-cert type -1
debug1: key_load_public: No such file or directory
debug1: identity file /home/lab/.ssh/id_ed25519 type -1
debug1: key_load_public: No such file or directory
debug1: identity file /home/lab/.ssh/id_ed25519-cert type -1
debug1: Local version string SSH-2.0-OpenSSH_7.6p1 Ubuntu-4ubuntu0.3
OpenSSH_7.6p1 Ubuntu-4ubuntu0.3, OpenSSL 1.0.2n  7 Dec 2017
debug1: Reading configuration data /home/lab/.ssh/config
debug1: /home/lab/.ssh/config line 2: Applying options for my_HPNA_IP
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug2: resolving "my_HPNA_IP" port 8022
debug2: ssh_connect_direct: needpriv 0
debug1: Connecting to my_HPNA_IP [my_HPNA_IP] port 8022.
debug1: Connection established.
debug1: identity file /home/lab/.ssh/id_rsa type 0
debug1: key_load_public: No such file or directory
debug1: identity file /home/lab/.ssh/id_rsa-cert type -1
debug1: Local version string SSH-2.0-OpenSSH_7.6p1 Ubuntu-4ubuntu0.3
debug1: Remote protocol version 2.0, remote software version NA_2018.11.P01
debug1: no match: NA_2018.11.P01
debug2: fd 3 setting O_NONBLOCK
debug1: Authenticating to my_HPNA_IP:8022 as 'A635653'
debug3: put_host_port: [my_HPNA_IP]:8022
debug3: hostkeys_foreach: reading file "/home/lab/.ssh/known_hosts"
debug3: record_hostkey: found key type ECDSA in file /home/lab/.ssh/known_hosts:4
debug3: load_hostkeys: loaded 1 keys from [my_HPNA_IP]:8022
debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521
debug3: send packet: type 20
debug1: SSH2_MSG_KEXINIT sent
debug3: receive packet: type 20
debug1: SSH2_MSG_KEXINIT received
debug2: local client KEXINIT proposal
debug2: KEX algorithms: curve25519-sha256,[email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha256,diffie-hellman-group14-sha1,ext-info-c
debug2: host key algorithms: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],ssh-ed25519,rsa-sha2-512,rsa-sha2-256,ssh-rsa
debug2: ciphers ctos: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected]
debug2: ciphers stoc: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected]
debug2: MACs ctos: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: MACs stoc: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: compression ctos: none,[email protected],zlib
debug2: compression stoc: none,[email protected],zlib
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug2: peer server KEXINIT proposal
debug2: KEX algorithms: diffie-hellman-group-exchange-sha256,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521
debug2: host key algorithms: ssh-dss,ssh-rsa,ecdsa-sha2-nistp256,ecdsa-sha2-nistp521,ecdsa-sha2-nistp384
debug2: ciphers ctos: aes128-ctr,aes192-ctr,aes256-ctr,3des-cbc,aes128-cbc,aes192-cbc,aes256-cbc
debug2: ciphers stoc: aes128-ctr,aes192-ctr,aes256-ctr,3des-cbc,aes128-cbc,aes192-cbc,aes256-cbc
debug2: MACs ctos: hmac-sha1,hmac-sha1-96,hmac-sha2-256
debug2: MACs stoc: hmac-sha1,hmac-sha1-96,hmac-sha2-256
debug2: compression ctos: none,zlib
debug2: compression stoc: none,zlib
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug1: kex: algorithm: ecdh-sha2-nistp256
debug1: kex: host key algorithm: ecdsa-sha2-nistp256
debug1: kex: server->client cipher: aes128-ctr MAC: hmac-sha2-256 compression: none
debug1: kex: client->server cipher: aes128-ctr MAC: hmac-sha2-256 compression: none
debug3: send packet: type 30
debug1: sending SSH2_MSG_KEX_ECDH_INIT
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug3: receive packet: type 31
debug1: Server host key: ecdsa-sha2-nistp256 SHA256:QmSAC50RHNQF1uJT1XDmAhAtc7gAObYgWFJGp+j5RSk
debug3: put_host_port: [my_HPNA_IP]:8022
debug3: put_host_port: [my_HPNA_IP]:8022
debug3: hostkeys_foreach: reading file "/home/lab/.ssh/known_hosts"
debug3: record_hostkey: found key type ECDSA in file /home/lab/.ssh/known_hosts:4
debug3: load_hostkeys: loaded 1 keys from [my_HPNA_IP]:8022
debug3: hostkeys_foreach: reading file "/home/lab/.ssh/known_hosts"
debug3: record_hostkey: found key type ECDSA in file /home/lab/.ssh/known_hosts:4
debug3: load_hostkeys: loaded 1 keys from [my_HPNA_IP]:8022
debug1: Host '[my_HPNA_IP]:8022' is known and matches the ECDSA host key.
debug1: Found key in /home/lab/.ssh/known_hosts:4
debug3: send packet: type 21
debug2: set_newkeys: mode 1
debug1: rekey after 4294967296 blocks
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug3: receive packet: type 21
debug1: SSH2_MSG_NEWKEYS received
debug2: set_newkeys: mode 0
debug1: rekey after 4294967296 blocks
debug2: key: /home/lab/.ssh/id_rsa (0x7fffe79c65b0), explicit
debug3: send packet: type 5
debug3: receive packet: type 6
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug3: send packet: type 50
debug3: receive packet: type 51
debug1: Authentications that can continue: password,keyboard-interactive
debug3: start over, passed a different list password,keyboard-interactive
debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup keyboard-interactive
debug3: remaining preferred: password
debug3: authmethod_is_enabled keyboard-interactive
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug3: send packet: type 50
debug2: we sent a keyboard-interactive packet, wait for reply
debug3: receive packet: type 60
debug2: input_userauth_info_req
Password
Enter A635653's password:
debug2: input_userauth_info_req: num_prompts 1
Password:
debug3: send packet: type 61
debug3: receive packet: type 52
debug1: Authentication succeeded (keyboard-interactive).
Authenticated to my_HPNA_IP ([my_HPNA_IP]:8022).
debug3: ssh_init_stdio_forwarding: my_dest_host:22
debug1: channel_connect_stdio_fwd my_dest_host:22
debug1: channel 0: new [stdio-forward]
debug2: fd 4 setting O_NONBLOCK
debug2: fd 5 setting O_NONBLOCK
debug1: getpeername failed: Bad file descriptor
debug3: send packet: type 90
debug2: fd 3 setting TCP_NODELAY
debug3: ssh_packet_set_tos: set IP_TOS 0x10
debug1: Entering interactive session.
debug1: pledge: network
debug3: receive packet: type 92
channel 0: open failed: administratively prohibited: User does not have permission
debug2: channel_input_open_failure: channel 0: callback start
stdio forwarding failed
ssh_exchange_identification: Connection closed by remote host

相关内容