我有这个 USB 驱动器，我正在尝试修复它。当我插入它时，dmesg 显示以下内容：
[83630.997986] usb 1-10: new high-speed USB device number 12 using xhci_hcd
[83631.146553] usb 1-10: New USB device found, idVendor=ffff, idProduct=1201, bcdDevice= 0.00
[83631.146557] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[83631.147917] usb-storage 1-10:1.0: USB Mass Storage device detected
[83631.148272] scsi host4: usb-storage 1-10:1.0
[83632.166402] scsi 4:0:0:0: Direct-Access NAND USB2DISK 0.00 PQ: 0 ANSI: 4
[83632.166579] sd 4:0:0:0: Attached scsi generic sg1 type 0
[83632.210532] sd 4:0:0:0: [sdb] Attached SCSI removable disk
sudo lsusb 给出（总线 001 设备 012 是 USB 驱动器）：
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0b0e:0312 GN Netcom Jabra EVOLVE 30 II
Bus 001 Device 011: ID 04f2:0112 Chicony Electronics Co., Ltd KU-8933 Keyboard with PS/2 Mouse port
Bus 001 Device 002: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 001 Device 008: ID 8087:0026 Intel Corp.
Bus 001 Device 006: ID 413c:4503 Dell Computer Corp. Dell Universal Receiver
Bus 001 Device 012: ID ffff:1201
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
这是 lsblk 的结果：
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
loop0 7:0 0 4K 1 loop /snap/bare/5
loop1 7:1 0 142,2M 1 loop /snap/chromium/2082
loop2 7:2 0 255,6M 1 loop /snap/gnome-3-34-1804/36
loop3 7:3 0 47M 1 loop /snap/snapd/16292
loop4 7:4 0 48M 1 loop /snap/snapd/16778
loop5 7:5 0 346,3M 1 loop /snap/gnome-3-38-2004/115
loop6 7:6 0 63,2M 1 loop /snap/core20/1623
loop7 7:7 0 45,9M 1 loop /snap/snap-store/592
loop8 7:8 0 55,6M 1 loop /snap/core18/2560
loop9 7:9 0 91,7M 1 loop /snap/gtk-common-themes/1535
loop10 7:10 0 400,8M 1 loop /snap/gnome-3-38-2004/112
loop11 7:11 0 81,3M 1 loop /snap/gtk-common-themes/1534
loop12 7:12 0 219M 1 loop /snap/gnome-3-34-1804/77
loop14 7:14 0 62M 1 loop /snap/core20/1611
loop15 7:15 0 54,2M 1 loop /snap/snap-store/558
loop16 7:16 0 142,2M 1 loop /snap/chromium/2076
loop17 7:17 0 55,6M 1 loop /snap/core18/2566
sda 8:0 0 2,7T 0 disk
└─sda1 8:1 0 2,7T 0 part
nvme0n1 259:0 0 477G 0 disk
├─nvme0n1p1 259:2 0 512M 0 part /boot/efi
└─nvme0n1p2 259:3 0 476,4G 0 part /
nvme1n1 259:1 0 477G 0 disk
└─nvme1n1p1 259:4 0 477G 0 part
这是否意味着该驱动器已失效并且我不应该期望其中存储的数据有任何恢复？或者有什么办法可以让它发生吗？
提前致谢
答案1
我遇到了同样的问题，因为未加载 scsi 块模块。在 中make menuconfig，SCSI 块设备驱动程序通常可以在以下位置找到：
Device Drivers--->
SCSI device support--->
<*>SCSI disk support
我使用的内核版本是6.4.0。