我使用了以下代码:
\begin{tabular}{|c|c|l|}
\hline
Pin Number & Pin Name & Analog Function\\
\hline
\hline
1& 4xOUTZ& Yaw-rate or Z-rate output voltage 4 times amplified ($\pm$ 100 °/sec) \\
\hline
2& OUTZ& Yaw-rate or Z-rate output voltage ($\pm$ 400 °/sec) \\
\hline
3& ST& Self-test (logic 0: normal mode; logic 1: self-test) for Yaw Gyroscope \\
\hline
4& PD& Power-down(logic 0: normal mode; logic 1: Power-down mode) for Yaw Gyroscope \\
\hline
5& HP& High pass filter reset(logic 0: normal mode; logic 1: external high pass filter is
reset) for Yaw Gyroscope \\
\hline
6& NC& Not connected \\
\hline
7& GND& Supply Ground \\
\hline
8& NC& Not connected \\
\hline
9& NC& Not connected \\
\hline
10& Vref& Vref output from the Yaw Gyroscope IC. (Leave unconnected) \\
\hline
11& OUTY& Roll-Rate or Y-rate output voltage ($\pm$ 400 °/sec) \\
\hline
12& 4xOUTY& Roll-rate or Y-rate output voltage 4 times amplified ($\pm$ 100 °/sec)\\
\hline
13& 4xOUTX& Pitch-rate or X-rate output voltage 4 times amplified ($\pm$ 100 °/sec) \\
\hline
14& OUTX& Pitch-rate or X-rate output voltage ($\pm$ 400 °/sec) \\
\hline
15& ST& Self-test (logic 0: normal mode; logic 1: self-test) for Pitch and Roll Gyroscope \\
\hline
16& PD& Power-down(logic 0: normal mode; logic 1: Power-down mode) Pitch and Roll Gyroscope \\
\hline
17& HP& High pass filter reset(logic 0: normal mode; logic 1: external high pass filter is reset) Pitch and Roll Gyroscope \\
\hline
18& Vdd& 3.3V supply voltage \\
\hline
19& Vref& Vref output from the Pitch and Roll Gyroscope IC. (Leave unconnected) \\
\hline
20& NC& Not connected \\
\hline
21& NC& Not connected \\
\hline
22& Vref& Vref output from the IC. (Leave unconnected) \\
\hline
23& NC& Not connected \\
\hline
24& NC& Not connected \\
\hline
\end{tabular}
准备如下表格:
但是你可以看到我的问题是什么。有没有办法在不更改我已经编写的大量代码的情况下将文本换行到表格中?
答案1
尝试使用该tabularx
包。再次查看示例的相关部分:
\usepackage{tabularx}
\begin{document}
\noindent
\begin{tabularx}{\linewidth}{|c|c|X|}
当然,您也可以使用不同于的表格宽度\linewidth
。