这可能很傻，但我想知道是否有人可以为 JASA Express Letters 提供 LaTeX 模板。
美国声学学会的网站上提供了“常规”期刊论文的模板，但我似乎无法找到《快报》的模板。
我希望这里有人遇到了这个问题，并且希望比我更成功地找到解决方案。
答案1
登录 JASA PeerX-Press 网站后即可获取以下信息：http://jasa.peerx-press.org/html/jasa/Using_LaTeX_for_JASA.html
您找到的 JASATeX 模板不是官方模板（尽管可从其网站获取并托管在其 ftp 站点上）。相反，他们说：
ASA 非常希望您将自己的 LaTeX 文件生成为独立文件（仅一个文件），而不使用 TUG（TeX 用户组）标准 LaTeX 分发中没有的任何样式文件。
答案2
这是一个最小的工作示例，应该可以满足您的要求。它并不完全准确，但当我尝试使用一些以前发布的文本时，输出基本相同，除了奇怪的单词跑到下一行。
要使用，只需将以下所有内容粘贴到 latex 文件中并运行即可。我很想知道大家对此有何看法。
% Version: 1.0.0 [15/05/13] - Initial build
% Author: Pete R Jones <[email protected]>
\documentclass[10pt,letterpaper]{article}
%%%%%%%%%%%%%%%%%%% REQUIRED PACKAGES %%%%%%%%%%%%%%%%%%%
\usepackage{graphicx} % figures
\usepackage{geometry} % page layout
\usepackage{amsmath,amsfonts,bm} % mathematical typesetting
\usepackage{enumitem} % nicer enumerated lists
\usepackage{natbib} % references
\usepackage[hidelinks, colorlinks=true,
linkcolor=black, citecolor=blue]{hyperref} % links (esp. for references)
\usepackage{fancyhdr, calc, lastpage} % headers/footers
\usepackage{booktabs} % tables
\usepackage{lipsum} % for generating dummy text
\usepackage{endnotes} % endotes
%%%%%%%%%%%%%%%%%%% MANUSCRIPT OPTIONS %%%%%%%%%%%%%%%%%%%
% Uncomment these for 'manuscript' mode (double-line spacing with figures/tables at end)
%\usepackage{endfloat} % for placing figures/tables at end (with marker in appropriate place)
%\linespread{1.8}
%%%%%%%%%%%%%%%%%%% JASA EXPRESS STYLING %%%%%%%%%%%%%%%%%%%
% Notes:
% NO NEED TO EDIT ANY OF THIS!
% Instructions for authors can be found at: http://scitation.aip.org/journals/doc/ASALIB-home/corp/pdf/jasael/jasaelstyle.pdf
% The submission guidelines require a copyright notice be placed on the line immediately following the Abstract. However, since this doesn't seem to appear in the published letter this has been omitted.
% Headers and footers have not been made to match exactly the published ones (e.g., different for odd/even pages) - though it would be easy to do so. This is in part because the submission guidelines follow a different convention to the published article (somewhat confusingly).
% Currently no support for footnotes (would be easy enough to add, but these are supposed to be short reports after all)
%% Page-layout commands
\geometry{nohead,right=4.4cm,left=4cm,top=1.65cm,bottom=4cm} %% uses geometry.sty%% 12 pt = 1 pc; 6 pc = 1 in.
% set font (not an exact match to the font used by JASA(?), but a pretty close approximation. Plus bitstream charter is a really nice font)
\renewcommand{\familydefault}{bch}
% Set headers and footers
\pagestyle{fancy}
\fancyhead{} % clear existing header
\renewcommand{\headrulewidth}{0pt} % remove the line
\fancyhead[L]{\footnotesize USE \textbackslash{}setheader to set running head} %Authors al.: JASA Express Letters}
\fancyhead[C]{\footnotesize page \arabic{page} of \pageref{LastPage}} % [http://dx.doi.org/12.3456/1.2345678]}
\fancyhead[R]{\footnotesize YOUR\_SURNAME, JASA-EL} % Published Online 15 May 2013}
\fancyfoot{} % clear existing footer
\fancyfoot[L]{\footnotesize \today} % J. Acoust. Soc. Am}
% extend beyond horizontal margins
\fancyheadoffset[L,R]{\marginparsep+1cm} % requires \usepackage{calc}
\fancyfootoffset[L]{\marginparsep+1cm} % requires \usepackage{calc}
% set vertical spacing
\setlength\headsep{1cm} % rule to body content
\setlength\footskip{1.5cm} % rule to body content
\newcommand\setheader[2]{
\fancyhead[L]{\footnotesize #1}
\fancyhead[R]{\footnotesize #2, JASA-EL}
}
%% Format title/author info
% article title
\renewcommand\title[1]{{\linespread{1} \noindent\LARGE \bf \hskip2.25pc \parbox{.8\textwidth}{%
\LARGE \bf \begin{center} #1 \end{center}\rm } \rm\normalfont\normalsize} }
% author name
\renewcommand\author[1]{{\linespread{1} \noindent\hskip2.25pc \parbox{.8\textwidth}{%
\normalsize \bf \begin{center} #1 \end{center}\rm } \vskip-1.4pc }}
% address
\newcommand\address[1]{{\linespread{1} \noindent\hskip2.25pc \parbox{.8\textwidth}{%
\footnotesize \it \begin{center} #1 \end{center}\rm } \normalsize \vskip-1pc }}
% email
\newcommand\email[1]{\vskip-.3cm \noindent\parskip0pc\hskip2.25pc \footnotesize%
\parbox{.8\textwidth}{\begin{center}\it #1 \rm \end{center} } \normalsize \vskip-.2cm}
% PACS codes
\newcommand\PACS[1]{\vskip-2.75pc \begin{center}\parbox{.8\textwidth}{\small\bf PACS numbers: \rm #1 \hfill} \end{center}\vskip4pt}%
%% Abstract
\renewenvironment{abstract}%%
{\vskip1pc\noindent\begin{center} \begin{minipage}{.8\textwidth} {\bf Abstract: } }
{ \vspace{.25cm} \end{minipage}\end{center}\normalsize\vskip-1.5pc}%
%% Various customizations
\renewcommand\figurename{Fig.}
\def\fps@table{h}%\def\fps@table{!htb}
\renewcommand\refname{\normalsize References and links \rm}
%% New caption commands
\makeatletter
\newcommand\@MaxCapWidth{4.25in}
\setlength\belowcaptionskip{1pt}
\long\def\@makecaption#1#2{%
\small
\vskip\abovecaptionskip
\sbox\@tempboxa{#1. #2}%
\ifdim \wd\@tempboxa >\@MaxCapWidth
\hskip2.25pc\parbox{4.5in}{#1. #2}
\else
\global \@minipagefalse
\hb@xt@\hsize{\hfil\box\@tempboxa\hfil}%
\fi
\vskip\belowcaptionskip\normalsize}
\makeatother
%% Formatting of section headers
\makeatletter
\renewcommand\@seccntformat[1]{\csname the#1\endcsname.\hspace{.1cm}}
\renewcommand\thesubsection{\thesection.\arabic{subsection}}
\renewcommand\thesubsubsection{\thesubsection.\arabic{subsubsection}}
\renewcommand\section{\@startsection {section}{1}{0pt}%
{-2ex plus -1ex minus -.2ex}%
{0.65ex plus 1.2ex}%
{\normalsize\bfseries}}
\renewcommand\subsection{\@startsection{subsection}{2}{0pt}%
{-2.25ex plus -1ex minus -.2ex}%
{.45ex plus .2ex}%
{\normalsize\itshape}}
\renewcommand\subsubsection{\@startsection{subsubsection}{3}{0pt}%
{-2.25ex plus -1ex minus -.2ex}%
{1ex plus .2ex}%
{\small\upshape}}
\makeatother
% Bodytext spacing
\frenchspacing
\setlength\parindent{1.25cm}
% Endnotes
% Set indent to be same as references
\def\enoteformat{\rightskip=0pt \leftskip=0pt \parindent=1cm
\leavevmode\llap{\makeenmark}}
% Add a vertical gap between endnotes and references
\makeatletter
\let\old@theendnotes\theendnotes
\renewcommand{\theendnotes}{\old@theendnotes\vspace{.3cm}}
\makeatother
% Make footnote alias onto endnote (so can use either command interchangably)
\let\footnote=\endnote
% Remove heading
\def\enoteheading{\hspace{.1cm}\vspace{-.25cm}}
% bibliography formatting
\makeatletter
\renewenvironment{thebibliography}[1]
% spacing
{\section*{\refname}%
\@mkboth{\MakeUppercase\refname}{\MakeUppercase\refname}%
\footnotesize
% print endnotes (if any)
\ifnum\value{endnote} > 0
\theendnotes % print endnotes
\fi
\list{\@biblabel{\@arabic\c@enumiv}}%
{\settowidth\labelwidth{\@biblabel{#1}}%
%\advance\leftmargin-6pt
\setlength\itemindent{0pt}% change using the inverse of the length used before
\setlength\itemsep{-1pt}
}}
{\endlist}
% individual reference formatting
\newcommand{\enquote}[1]{``#1''}
\expandafter\ifx\csname natexlab\endcsname\relax\def\natexlab#1{#1}\fi
\expandafter\ifx\csname url\endcsname\relax
\def\url#1{\texttt{#1}}\fi
\expandafter\ifx\csname urlprefix\endcsname\relax\def\urlprefix{URL }\fi
\providecommand{\bibinfo}[2]{#2}
\providecommand{\noopsort}[1]{}
\providecommand{\switchargs}[2]{#2#1}
\makeatother
% Tables
\renewcommand{\toprule}{\specialrule{.35pt}{.3cm}{1pt} \specialrule{.35pt}{1pt}{5pt} } % double rules at top (.3cm vertical gap from caption)
\renewcommand{\bottomrule}{\specialrule{.35pt}{0cm}{1pt} \specialrule{.35pt}{1pt}{0pt} } % and bottom
%%%%%%%%%%%%%%%%%%%%%%% DOCUMENT BEGINS HERE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{document}
% ================================================================================================
\setheader{Unofficial template}{Jones}
\title{An unofficial template for authors submitting to \textit{JASA-EL}}
\author{Pete R. Jones}
\address{Child Vision Lab, Institute of Ophthalmology, University College London\\11-43 Bath Street, London. EC1V 9EL}
\email{[email protected]}
% ================================================================================================
\begin{abstract}
\lipsum[1]
\end{abstract}
\PACS{xxxxxx} % replace with appropriate codes (Section 43 Acoustics): http://www.aip.org/pacs/pacs2010/individuals/pacs2010_regular_edition/reg_acoustics_appendix.htm
% ================================================================================================
\section{Introduction}
\lipsum[1-2]
% ================================================================================================
\section{Methods}
%------------------------------------------------------------------------------
\subsection{Participants}
\lipsum[1]
%------------------------------------------------------------------------------
\subsection{Procedure}
\lipsum[1]
%------------------------------------------------------------------------------
\subsection{Stimuli}
\lipsum[1]
% ================================================================================================
\section{Results}
Standard \LaTeX{} environments should be used to place tables, figures, and math. An example figure is shown in Fig.~\ref{fig:example}. An example equation is shown in Eq.~\ref{eq:example}. An example table is shown in Table.~\ref{tab:example}. And, just for good measure, here is an example reference to \cite{swets1959multiple}. References can also be made in parentheses \citep[like this;][]{tanner1958masking}. You may want to include additional information in endnotes\endnote{This is an example endnote}. information in endnotes\endnote{This is another example endnote}
\lipsum[1]
\begin{figure}[h!]
\rule{10cm}{5cm} % e.g., replace with: \includegraphics[width=7cm]{my_figure.png}%
\caption{Sample caption.}
\label{fig:example}
\end{figure}
\lipsum[1]
\begin{equation}
H = \frac{1}{2m}(p_x^2 + p_y^2) + \frac{1}{2} M{\Omega}^2
(x^2 + y^2) + \omega (x p_y - y p_x).
\label{eq:example}
\end{equation}
\lipsum[1]
\begin{table}[h!]
\caption
{
Correlation coefficients, $r$, between A, B, and C.
}
\centering
\begin{tabular}{cccc}
\toprule
&A&B&C\\
\midrule
A&-&0.81&0.82\\
B&0.80&-&0.45\\
C&0.62&0.89&-\\
\bottomrule
\end{tabular}
\label{tab:example}
\end{table}
% ================================================================================================
\section{Discussion}
\lipsum[1]
% ================================================================================================
\section{Conclusions}
\begin{enumerate}[itemsep=0pt,label=(\arabic*)]
\item hello
\item world
\end{enumerate}
% ================================================================================================
\section*{Acknowledgments}
\lipsum[1]
% ================================================================================================
\begin{thebibliography}{1}
\bibitem[{Swets (2009)}]{swets1959multiple}
\bibinfo{author}{Swets, J.A.}
(\textbf{\bibinfo{year}{1959}}). \enquote{\bibinfo{title}{Multiple
observations of signals in noise}}, \bibinfo{journal}{J. Acoust.
Soc. Am.} \textbf{\bibinfo{volume}{31}}({\bibinfo{number}{4}}),
\bibinfo{pages}{514--521}.
\bibitem[{Tanner (2009)}]{tanner1958masking}
\bibinfo{author}{Tanner Jr., W.P.}
(\textbf{\bibinfo{year}{1958}}). \enquote{\bibinfo{title}{What
is masking?}}, \bibinfo{journal}{J. Acoust.
Soc. Am.} \textbf{\bibinfo{volume}{30}}({\bibinfo{number}{10}}),
\bibinfo{pages}{919--921}.
\end{thebibliography}
% ================================================================================================
\end{document}
nb 显然，如果将所有格式代码移到外部 Latex 类中，会更整洁一些，但 JASA 似乎更喜欢将所有内容放在一个文件中。
答案3
声学学会现在有全新的文章和快信模板，它们做得非常漂亮，记录得很好。你可以在http://acousticalsociety.org/content/latex-package-authors