我购买了新硬盘 Seagate (Backup Plus)，但我遇到了问题。
首先，它不会在每次插入时安装。在这种情况下，我必须重新启动计算机才能使用它。
其次，每当删除它时，rsyslogd和kworker命令都会变得狂暴，占用 CPU 并且该rsyslogd命令会将其写入/var/log/syslog文件：
cmd urb 提交失败
我的观察：对于安装的第一个问题，我尝试手动安装它，但结果是dmesg：
[ 3791.677885] usb 1-1.1: >new high-speed USB device number 5 using ehci_hcd
[ 3791.831989] usb 1-1.1: >New USB device found, idVendor=0bc2, idProduct=a013
[ 3791.831995] usb 1-1.1: >New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 3791.831998] usb 1-1.1: >Product: Backup+ BK
[ 3791.832001] usb 1-1.1: >Manufacturer: Seagate
[ 3791.832003] usb 1-1.1: >SerialNumber: NA533ZTL
[ 3791.832846] scsi7 : uas
[ 3791.834099] scsi 7:0:0:0: >Direct-Access Seagate Backup+ BK 0410 PQ: 0 ANSI: 6
[ 3791.834843] sd 7:0:0:0: >Attached scsi generic sg3 type 0
[ 3791.835062] sd 7:0:0:0: >[sdc] Spinning up disk...
[ 3792.835724] ....ready
[ 3795.843334] sd 7:0:0:0: >[sdc] 1953525167 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3796.014772] sd 7:0:0:0: >[sdc] Write Protect is off
[ 3796.014783] sd 7:0:0:0: >[sdc] Mode Sense: 4f 00 00 00
[ 3796.015652] sd 7:0:0:0: >[sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3796.026527] sdc: sdc1
[ 3796.029091] sd 7:0:0:0: >[sdc] Attached SCSI disk
[ 3826.329960] sd 7:0:0:0: >uas_eh_abort_handler tag 0
[ 3826.329973] sd 7:0:0:0: >uas_eh_device_reset_handler tag 0
[ 3826.329981] sd 7:0:0:0: >uas_eh_target_reset_handler tag 0
[ 3826.329985] sd 7:0:0:0: >uas_eh_bus_reset_handler tag 0
[ 3826.333953] usb 1-1.1: >URB BAD STATUS -71
[ 3826.402029] usb 1-1.1: >reset high-speed USB device number 5 using ehci_hcd
[ 3826.555545] sd 7:0:0:0: >Device offlined - not ready after error recovery
另一项观察结果是，当我在已连接驱动器的情况下启动笔记本电脑时，它工作正常。它既没有自动挂载问题，也没有CPU占用问题。