复杂形状的盒子(带有彩色边框,高度按照 \begin{minipage}[height=...] 中的规定)

复杂形状的盒子(带有彩色边框,高度按照 \begin{minipage}[height=...] 中的规定)

这是我问的第一个问题。我认真地搜索了这些主题,但还没有找到解决方案,我甚至发现很难用一个简短的标题来描述德语中要寻找的内容。我认为我有一个好主意,也可能引起其他人的兴趣,并希望我能清楚地表达我想要做的事情。所以也许最终重命名或拆分问题或更改标签似乎足够了。我们会做到这一点。

我想制作一张海报,并在上面分布彩色盒子。这些彩色盒子的形状不应是矩形,但应有 4 条以上的边。在我稍长的 MWE 中,我给出了我已经获得的代码。我已经尽可能地减少了我认为合适的部分。抱歉,工作示例太长了。实际输出和它应该是什么样子的想法已作为图像附加。这里黑线指定边缘。我认为一旦给出语法,我就可以尝试再次进行自己的调整。另一点,关于分割的评论可能会成为一个问题,是因为我还没有找到如何指定例如如何使用它 \vspace{}可以取设置中指定的高度的剩余部分minipage

    % !TeX spellcheck = en_EN

    %\PassOptionsToPackage{explicit}{titlesec}
    \PassOptionsToPackage{demo}{graphicx}
    \documentclass[portrait,a0]{a0poster}


    \usepackage[normalem]{ulem}
    \usepackage[utf8]{inputenc}
    \usepackage[british]{babel}
    \usepackage{setspace}
    \usepackage{gensymb}
    \usepackage{lipsum}
    \usepackage[justification=centering]{caption}


    \usepackage{geometry}
    \geometry{hmargin=15mm, bmargin=15mm, tmargin=15mm}

    \usepackage{xcolor}
    \usepackage{wrapfig}
    \usepackage{tcolorbox}
    \usepackage{adjustbox}
    %\usepackage{graphicx}
    %\usepackage{multicol}
    %\usepackage{parcolumns}
    %\usepackage{showframe}
    %\usepackage{float}
    %\usepackage{amsmath}
    %\usepackage{textcomp}


    %===================================================================
    \definecolor{light-gray}{gray}{0.95}
    \tcbset{colframe=vssblue, colback=vssblue, coltext=white, before=\adjustbox{valign=c}\bgroup, after=\egroup}%,font=\bfseries}
    \definecolor{vssblue}{rgb}{0,0.4196,0.6745} %blue
    %\DeclareRobustCommand*{\Authorrefmark}[1]{\raisebox{0pt}[0pt][0pt]{\textsuperscript{\footnotesize #1}}}





    \begin{document}
    %\graphicspath{../Bilder}
    %\renewcommand{\includegraphics}[2][]{\fbox{}}
    \pagestyle{empty}


    \centering

    {%
    \begin{adjustbox}{minipage=\textwidth,margin=0,bgimage=./pics/TU_building_300}
        \begin{tcolorbox}[height=4cm,width=0.8\textwidth]%
        \centering%\color{white}%
        {
        \begin{spacing}{1.1}\LARGE\bfseries\addtolength\baselineskip{1mm} Analysis of short range phenomena in two novel materials using the PDF-method\end{spacing}
        }%
        \end{tcolorbox}%
        \hspace{3mm}
        \begin{minipage}{0.2\textwidth}
        {\centering\hspace{-1mm}\includegraphics[width=\textwidth]{../Bilder/XRCLogo.png}}%
        \end{minipage}
        \begin{minipage}{1\textwidth}
        \vspace{5mm}\large\bfseries\uline{Philipp Hans}\textsuperscript{a}, Klaudia Hradil\\[2mm] %
            X-ray Center - TU Wien%
        \end{minipage}
    \end{adjustbox}\\[5mm]%
    }%


    \begin{minipage}[t][0.4\textheight][t]{1\textwidth}\vspace{0pt}
    \centering
        \begin{minipage}[t][1\textheight][t]{0.65\textwidth}\vspace{0pt}
        \centering
            \begin{tcolorbox}[colback=white,colframe=green!40!black,fontupper=\color{black},title=\large Beispiel 1: Strukturänderung in Folge einer Amorphisierung: Mit TiO\(_2\) beschichtete Si-Partikel - Eine Messung vom Synchrotron]
                \centering  
                \adjustbox{valign=t}{
                \begin{minipage}{0.3\textwidth}
                    \centering
                    \includegraphics[width=1\textwidth]{}
                    \captionof*{figure}{x}
                \end{minipage}%
                \begin{minipage}{0.3\textwidth}
                    \centering  \includegraphics[width=1\textwidth]{}
                    \captionof*{figure}{c}
                \end{minipage}}
                \adjustbox{valign=t}{
                    \begin{minipage}{0.3\textwidth}
                    \lipsum[3]
                    \end{minipage}}%

                \adjustbox{valign=t}{
                    \begin{minipage}{0.3\textwidth}
                    \centering
                    \includegraphics[width=1\textwidth]{../Bilder/allesgr.png}
                    \captionof*{figure}{a}
                    \end{minipage}}%
                \adjustbox{valign=t}{
                    \begin{minipage}{0.3\textwidth}
                    \centering
                    \includegraphics[width=1\textwidth]{../Bilder/difplt_verglTiO2.png}
                    \captionof*{figure}{b: \AA}
                    \end{minipage}}%
                \vspace{18cm}
    %           \hfill
            \end{tcolorbox}%
        \end{minipage}%
    %
    \hfil
    %
        \begin{minipage}[t][1\textheight][t]{0.3\textwidth}\vspace{0pt}
            \section*{What's it all about?}
            \lipsum[1-3]

            \begin{thebibliography}{3}
                \scriptsize
    %           \begin{multicols}{2}
                    \bibitem{IEEEhowto:Key}
                        Debye, P.: ”Zerstreuung von R\"ontgenstrahlen”. - \hskip 1em plus 0.5em minus 0.4em\relax Annalen der Physik, 1915, 351, pp. 809-823\vspace{-0.3cm}

    %           \end{multicols}
            \end{thebibliography}
        \end{minipage}%
    \end{minipage}%
    \vfil


    \begin{minipage}[0.60\textheight]{\textwidth}%\vspace{0pt}
        \centering
            \begin{tcolorbox}[colback=white,colframe=green!40!black,fontupper=\color{black},title=\large Beispiel 1: Strukturänderung in Folge einer Amorphisierung: Mit TiO\(_2\) beschichtete Si-Partikel - Eine Messung vom Synchrotron]
                \centering  
                \adjustbox{valign=t}{
                \begin{minipage}{0.3\textwidth}
                    \centering
                    \includegraphics[width=1\textwidth]{}
                    \captionof*{figure}{x}
                \end{minipage}%
                \begin{minipage}{0.3\textwidth}
                        \centering  \includegraphics[width=1\textwidth]{}
                        \captionof*{figure}{c}
                \end{minipage}}
                \adjustbox{valign=t}{
                    \begin{minipage}{0.3\textwidth}
                    \lipsum[3]
                    \end{minipage}}%

                \adjustbox{valign=t}{
                    \begin{minipage}{0.3\textwidth}
                    \centering
                    \includegraphics[width=1\textwidth]{../Bilder/allesgr.png}
                    \captionof*{figure}{a}
                    \end{minipage}}%
                \adjustbox{valign=t}{
                    \begin{minipage}{0.3\textwidth}
                    \centering
                    \includegraphics[width=1\textwidth]{}
                    \captionof*{figure}{b: \AA}
                    \end{minipage}}%

                \adjustbox{valign=t}{
                    \begin{minipage}{0.3\textwidth}
                    \centering
                    \includegraphics[width=\textwidth]{}
                    \captionof*{figure}{b}
                    \end{minipage}}
                \adjustbox{valign=t}{
                    \begin{minipage}{0.3\textwidth}
                    \centering
                    \includegraphics[width=1\textwidth]{}
                    \captionof*{figure}{c}
                    \end{minipage}}
                \adjustbox{valign=t}{
                    \begin{minipage}{0.3\textwidth}
                    It is very difficult to give an outlook how the results will be. It is planned to do a reverse monte carlo (RMC) refinement of 
                    trying to fit the experimental PDF in the best possible way. This is planned to do using the program DIFFEV[note].

                    As it is an amorphous sample,
                    \end{minipage}}

            \vspace{27cm}
            \hfill

            \end{tcolorbox}
    \end{minipage}
    %\enlargethispage{4cm}

    \vfill
    \begin{minipage}{\textwidth}
    \centering
    ECM29 - European Crystallographers Meeting 2015 in Rovinj/Croatia
    \end{minipage}%

    \end{document

实际输出功率 期望输出

如果有人能进一步帮助我,我将不胜感激。如果他或她有时间,也非常欢迎提供有关编程风格或其他解释的提示。

菲利普

PS:我没有足够的声誉来创建新的标签表达。我的建议如下:复杂形状的框分布对象框周围框架。如果有人觉得这个不错,也许这个人可以这样做。我认为这些是找到相应主题的好词。

相关内容