我正在制作简历。由于我是初学者，我尝试使用命令\vspace和来做一些行距\vfill。但我似乎没有得到预期的结果。我希望整个文档中存在的行距都是统一的。有人能给我一些建议吗，这样我就可以开始工作了。
我也尝试使用\onehalfspacing和\onespacing命令，但似乎都没有取得好的结果。
\documentclass[a4paper,10pt]{article}
%-----------------------------------------------------------
\usepackage[top=0.75in, bottom=0.75in, left=0.55in, right=0.85in]{geometry}
\usepackage{graphicx}
\usepackage{url}
\usepackage{palatino}
\usepackage{makecell}
\usepackage{tabularx}
\usepackage{verbatim}
\usepackage{pbox}
\renewcommand{\labelitemii}{$\star$}
\fontfamily{SansSerif}
\selectfont
\raggedbottom
\usepackage[T1]{fontenc}
\usepackage
%[ansinew]
[utf8]
{inputenc}
\usepackage{color}
\definecolor{mygrey}{gray}{0.75}
\textheight=9.75in
\raggedbottom
\setlength{\tabcolsep}{0in}
\newcommand{\isep}{-2 pt}
\newcommand{\lsep}{-0.5cm}
\newcommand{\psep}{-0.6cm}
\renewcommand{\labelitemii}{$\circ$}
\pagestyle{empty}
%-----------------------------------------------------------
%Custom commands
\newcommand{\resitem}[1]{\item #1 \vspace{-2pt}}
\newcommand{\resheading}[1]{{\small \colorbox{mygrey}{\begin{minipage}{0.975\textwidth}{\textbf{#1 \vphantom{p\^{E}}}}\end{minipage}}}}
\newcommand{\ressubheading}[3]{
\begin{tabular*}{6.62in}{l @{\extracolsep{\fill}} r}
\textsc{{\textbf{#1}}} & \textsc{\textit{[#2]}} \\
\end{tabular*}\vspace{-8pt}}
%-----------------------------------------------------------
\begin{document}
\linespread{1.25}
\hspace{0.5cm}\\[-0.2cm]
\textbf{Anupam Bisht} \\
\indent $2^{nd}$ Year, B.Tech Student\\
\indent Electrical and Electronics Engineering
\hfill Ph: +91 7200660151\\
\indent VIT University, Vellore, TN -632014
\hfill Email: [email protected] \\
\resheading{\textbf{OBJECTIVE} }\\[\lsep]
\vspace{4mm} \vfill
\indent To obtain a job in a core-company so that the technical skills and the knowledge acquired during the past \indent can be used to develop a new solution or optimize existing solutions for the profit of company as well as \indent betterment of the society.
\vspace{2mm}
\resheading{\textbf{ACADEMIC DETAILS} }\\[\lsep]
\vspace{5mm} \vfill
%\begin{table}[ht!]
%\begin{center}
\indent \begin{tabular}{ l @{\hskip 0.15in} l @{\hskip 0.20in} l @{\hskip 0.20in} l @{\hskip 0.20in} l }
\hline
\vspace{0.1mm}
\textbf{Year} &\textbf{Degree} & \textbf{Institute} & \textbf{CGPA/\%} \\
\hline
2015- Present&B.Tech Electrical and Electronics Engineering & VIT Vellore & 9.69 CGPA \\
2015 & 12th CBSE Board Examination & Kendriya Vidyalaya & 94.8\%\\
2013 & 10th CBSE Board Examination & Kendriya Vidyalaya & 10 CGPA\\
\hline
\end{tabular}
%\end{center}
%\end{table}
\vspace{2mm}
%\resheading{\textbf{FIELDS OF INTEREST} }\\[\lsep]
%\begin{itemize}
%\item \noindent Wireless Network and Network Security, %Another one, a third one
%\end{itemize}
\resheading{\textbf{AREA OF INTEREST} }\\[\lsep]
\vspace{1.0mm}
\begin{itemize}
\item Medical Sensors, circuit design, computer interfacing of hardware, control systems.
\end{itemize}
\vfill
\resheading{\textbf{TECHNICAL SKILLS} }\\[\lsep]
\vfill \vspace{1.0mm}
\begin{itemize}
\item \noindent \textbf{Languages:\space} C ,\space C++,\space Python, \space R
\item \noindent \textbf{Tools:\space}MATLAB,\space Orcad Pspice,\space Arduino\space, LabView ,\space\LaTeX
\item \noindent \textbf{Platforms:\space} Linux and Windows
\end{itemize}
\resheading{\textbf{PROJECTS} }\\[\lsep]
\vfill \vspace{0.5mm}
\begin{itemize}\itemsep2pt
\item \textbf{Calculation of HeartBeat using Photoplethysmogram in LabVIEW.} \textit{(Feburary 2017 - Currently Working)}
\end{itemize}
\indent We have designed to algorithms, which are inspired from the Pan-Tompkins Algorithm for QRS waveform detection for calculation of heartbeat. We also trying to do statistical analysis of the data using the R software
\resheading{\textbf{EXTRA CURRICULAR ACTIVITIES} }\\[\lsep]
\begin{itemize}
\item \noindent A volunteer at Kulethi primary school Champawat,Uttarakhand. I helped to promote tablet assisted teaching in the primary school.Also helped in video making of basic science experiments in Hindi, which are uploaded in YouTube.(June 2016)
\item \noindent Core Committee member at IEEE student chapter of VIT University.
(October 2015 - March 2016)
\end{itemize}
\resheading{\textbf{ACHIEVEMENTS} }\\[\lsep]
\begin{itemize}
\item \noindent Awarded with cash prize for ranking 3rd out of the 250 students in the branch at VIT University for the academic year 2016-17.
\item \noindent Awarded with cash prize for ranking 2nd out of the 250 students in the branch at VIT University for the academic year 2015-16.
\item \noindent Awarded with cash prize for scoring 10 CGPA in class 10th Board Examination.
\item \noindent Selected to represent KVS for Jawaharlal Nehru National Science, Mathematics and Environment Exhibition for children(JNNSMEE) held at Gangtok, Sikkim during November 2013.
\item \noindent Awarded 3rd Prize at KVS National Level Science Exhibition held at Kendriya Vidiyalaya Ballygunge, Kolkata for the project titled "Principle of Fiber Optic Communication and Related Applications" in the year 2012.
\end{itemize}
%\resheading{\textbf{MAJOR PROJECTS AND SEMINAR} }\\[\lsep]
%\begin{itemize}
%\item \textbf{Media Access Control Controling
%} (Research Project) \\
% \emph{(Guide:Prof. Hubert F.
%, May'13 - till date)} \\[-0.6cm]
% \begin{itemize}\itemsep \isep
% \item Objective :Performance analysis of HTTP web browsing traffic.
%.
% \item Performance analysis will help in comparing different MAC protocols based on different network sce-
%narios.
\end{document}
答案1
在查看输出之前，最好先修复所有警告。
有几个
Underfull \hbox (badness 10000) in paragraph at lines 45--46
都是由于误用\\所以删除那些，除了使用tabular
那么有几个
Overfull \hbox (8.59479pt too wide) in paragraph at lines 54--55
[][][][][][][]
每行一个\resheading。
因此将猜测的内容替换0.975\textwidth为\dimexpr\textwidth-2\fboxsep\relax
然后有警告
LaTeX Font Warning: Font shape `T1/SansSerif/m/n' undefined
来自
\fontfamily{SansSerif}\selectfont
我认为你打算 \sffamily
然后我删除了重复的部分\raggedbottom，并删除了原始语法分配，\textheight因为您已经用它geometry来设置页面。
然后我删除了所有的\noindent和\indent
那么标记至少是合理的，并且没有来自 TeX 的警告，所以才查看 PDF。
\documentclass[a4paper,10pt]{article}
%-----------------------------------------------------------
\usepackage[top=0.75in, bottom=0.75in, left=0.55in, right=0.85in]{geometry}
\usepackage{graphicx}
\usepackage{url}
\usepackage{palatino}
\usepackage{makecell}
\usepackage{tabularx}
\usepackage{verbatim}
\usepackage{pbox}
\renewcommand{\labelitemii}{$\star$}
\sffamily
\raggedbottom
\usepackage[T1]{fontenc}
\usepackage
%[ansinew]
[utf8]
{inputenc}
\usepackage{color}
\definecolor{mygrey}{gray}{0.75}
\setlength{\tabcolsep}{0in}
\newcommand{\isep}{-2 pt}
\newcommand{\lsep}{-0.5cm}
\newcommand{\psep}{-0.6cm}
\renewcommand{\labelitemii}{$\circ$}
\pagestyle{empty}
%-----------------------------------------------------------
%Custom commands
\newcommand{\resitem}[1]{\item #1 \vspace{-2pt}}
\newcommand{\resheading}[1]{%
\par
\medskip
{\small
\noindent
\colorbox{mygrey}{\begin{minipage}{\dimexpr\textwidth-2\fboxsep\relax}{\textbf{#1 \vphantom{p\^{E}}}}\end{minipage}}\par
\nopagebreak
\smallskip}}
\newcommand{\ressubheading}[3]{
\begin{tabular*}{6.62in}{l @{\extracolsep{\fill}} r}
\textsc{{\textbf{#1}}} & \textsc{\textit{[#2]}} \\
\end{tabular*}\vspace{-8pt}}
%-----------------------------------------------------------
\begin{document}
\linespread{1.25}
\noindent
\textbf{Anupam Bisht} \\
$2^{nd}$ Year, B.Tech Student\\
Electrical and Electronics Engineering
\hfill Ph: +91 7200660151\\
VIT University, Vellore, TN -632014
mail: [email protected]
\resheading{\textbf{OBJECTIVE}}
To obtain a job in a core-company so that the technical skills and the knowledge acquired during the past can be used to develop a new solution or optimize existing solutions for the profit of company as well as betterment of the society.
\resheading{\textbf{ACADEMIC DETAILS}}
\begin{tabular}{ l @{\hskip 0.15in} l @{\hskip 0.20in} l @{\hskip 0.20in} l @{\hskip 0.20in} l }
\hline
\vspace{0.1mm}
\textbf{Year} &\textbf{Degree} & \textbf{Institute} & \textbf{CGPA/\%} \\
\hline
2015- Present&B.Tech Electrical and Electronics Engineering & VIT Vellore & 9.69 CGPA \\
2015 & 12th CBSE Board Examination & Kendriya Vidyalaya & 94.8\%\\
2013 & 10th CBSE Board Examination & Kendriya Vidyalaya & 10 CGPA\\
\hline
\end{tabular}
\resheading{\textbf{AREA OF INTEREST}}
\begin{itemize}
\item Medical Sensors, circuit design, computer interfacing of hardware, control systems.
\end{itemize}
\resheading{\textbf{TECHNICAL SKILLS}}
\begin{itemize}
\item \textbf{Languages:} C ,\space C++,\space Python, \space R
\item \textbf{Tools:} MATLAB,\space Orcad Pspice,\space Arduino\space, LabView ,\space\LaTeX
\item \textbf{Platforms:} Linux and Windows
\end{itemize}
\resheading{\textbf{PROJECTS}}
\begin{itemize}\itemsep2pt
\item \textbf{Calculation of HeartBeat using Photoplethysmogram in LabVIEW.} \textit{(Feburary 2017 - Currently Working)}
\end{itemize}
We have designed to algorithms, which are inspired from the Pan-Tompkins Algorithm for QRS waveform detection for calculation of heartbeat. We also trying to do statistical analysis of the data using the R software
\resheading{\textbf{EXTRA CURRICULAR ACTIVITIES}}
\begin{itemize}
\item A volunteer at Kulethi primary school Champawat,Uttarakhand. I helped to promote tablet assisted teaching in the primary school.Also helped in video making of basic science experiments in Hindi, which are uploaded in YouTube.(June 2016)
\item Core Committee member at IEEE student chapter of VIT University.
(October 2015 - March 2016)
\end{itemize}
\resheading{\textbf{ACHIEVEMENTS}}
\begin{itemize}
\item Awarded with cash prize for ranking 3rd out of the 250 students in the branch at VIT University for the academic year 2016-17.
\item Awarded with cash prize for ranking 2nd out of the 250 students in the branch at VIT University for the academic year 2015-16.
\item Awarded with cash prize for scoring 10 CGPA in class 10th Board Examination.
\item Selected to represent KVS for Jawaharlal Nehru National Science, Mathematics and Environment Exhibition for children(JNNSMEE) held at Gangtok, Sikkim during November 2013.
\item Awarded 3rd Prize at KVS National Level Science Exhibition held at Kendriya Vidiyalaya Ballygunge, Kolkata for the project titled "Principle of Fiber Optic Communication and Related Applications" in the year 2012.
\end{itemize}
\end{document}
产生
这可能不是您想要的行距，但它应该为进一步指定间距提供更稳定的基础。