我想在页面右侧插入一张照片,但与标题(名称)的方向相同。我在我的 txt 文件中插入了此代码,并能够将照片放在右上角,但它在标题上方,留下了太多空白...
\begin{figure}
\includegraphics[width=3cm,height=4cm, right]{jessphoto.jpg}
\end{figure}
是否可以在 cls 文件中创建一个函数,然后在 txt 文件中调用它来执行此操作?
这是我的 cls 文件配置的一部分:
\ProvidesClass{resume}[2010/07/10 v0.9 Resume class]
\LoadClass[11pt,letterpaper]{article} % Font size and paper type
\usepackage[parfill]{parskip} % Remove paragraph indentation
\usepackage{array} % Required for boldface (\bf and \bfseries) tabular columns
\usepackage{ifthen} % Required for ifthenelse statements
\pagestyle{empty} % Suppress page numbers
%----------------------------------------------------------------------------------------
% HEADINGS COMMANDS: Commands for printing name and address
%----------------------------------------------------------------------------------------
\def \name#1{\def\@name{#1}} % Defines the \name command to set name
\def \@name {} % Sets \@name to empty by default
\def \addressSep {$\diamond$} % Set default address separator to a diamond
% One, two or three address lines can be specified
\let \@addressone \relax
\let \@addresstwo \relax
\let \@addressthree \relax
% \address command can be used to set the first, second, and third address (last 2 optional)
\def \address #1{
\@ifundefined{@addresstwo}{
\def \@addresstwo {#1}
}{
\@ifundefined{@addressthree}{
\def \@addressthree {#1}
}{
\def \@addressone {#1}
}}
}
% \printaddress is used to style an address line (given as input)
\def \printaddress #1{
\begingroup
\def \\ {\addressSep\ }
\centerline{#1}
\endgroup
\par
\addressskip
}
% \printname is used to print the name as a page header
\def \printname {
\begingroup
%\hfil{\MakeUppercase{\namesize\bf \@name}}\hfil
\hfil{\namesize\bf \@name}\hfil
\nameskip\break
\endgroup
}
%----------------------------------------------------------------------------------------
% PRINT THE HEADING LINES
%----------------------------------------------------------------------------------------
\let\ori@document=\document
\renewcommand{\document}{
\ori@document % Begin document
\printname % Print the name specified with \name
\printcvtitle
\@ifundefined{@addressone}{}{ % Print the first address if specified
\printaddress{\@addressone}}
\@ifundefined{@addresstwo}{}{ % Print the second address if specified
\printaddress{\@addresstwo}}
\@ifundefined{@addressthree}{}{ % Print the third address if specified
\printaddress{\@addressthree}}
}
%----------------------------------------------------------------------------------------
% SECTION FORMATTING
%----------------------------------------------------------------------------------------
% Defines the rSection environment for the large sections within the CV
\newenvironment{rSection}[1]{ % 1 input argument - section name
\sectionskip
\MakeUppercase{\bf #1} % Section title
\sectionlineskip
\hrule % Horizontal line
\begin{list}{}{ % List for each individual item in the section
\setlength{\leftmargin}{1.5em} % Margin within the section
}
\item[]
}{
\end{list}
}
%----------------------------------------------------------------------------------------
% WORK EXPERIENCE FORMATTING
%----------------------------------------------------------------------------------------
\newenvironment{rSubsection}[4]{ % 4 input arguments - company name, year(s) employed, job title and location
{\bf #1} \hfill {#2} % Bold company name and date on the right
\ifthenelse{\equal{#3}{}}{}{ % If the third argument is not specified, don't print the job title and location line
\\
{\em #3} \hfill {\em #4} % Italic job title and location
}\smallskip
\begin{list}{$\cdot$}{\leftmargin=0em} % \cdot used for bullets, no indentation
\itemsep -0.5em \vspace{-0.5em} % Compress items in list together for aesthetics
}{
\end{list}
\vspace{0.5em} % Some space after the list of bullet points
}
% The below commands define the whitespace after certain things in the document - they can be \smallskip, \medskip or \bigskip
\def\namesize{\huge} % Size of the name at the top of the document
\def\addressskip{\smallskip} % The space between the two address (or phone/email) lines
\def\sectionlineskip{\medskip} % The space above the horizontal line for each section
\def\nameskip{\bigskip} % The space after your name at the top
\def\sectionskip{\medskip} % The space after the heading section
这是我的 txt 文件的一部分:
\documentclass{resume} % Use the custom resume.cls style
\usepackage{graphicx}
\usepackage[export]{adjustbox}
\usepackage[left=0.75in,top=0.6in,right=0.75in,bottom=0.6in]{geometry} % Document margins
\usepackage[dvipsnames]{xcolor}
\usepackage{hyperref}
\hypersetup{
colorlinks=true,
urlcolor=RoyalBlue
}
\newcommand{\tab}[1]{\hspace{.2667\textwidth}\rlap{#1}}
\newcommand{\itab}[1]{\hspace{0em}\rlap{#1}}
\name{your name}
\address{your address}
\address{ phone \\ email \\
\href{linkedIn link}{linkedIn label} }
\begin{document}
%this is my attemptive to include the photo
\begin{figure}
\includegraphics[width=3cm,height=4cm, right]{jessphoto.jpg}
\end{figure}
%----------------------------------------------------------------------------------------
% ABOUT ME
%-----------------------------------------------------------------------------------------
\begin{rSection}{About Me}
Right here about you\vspace{7pt}
\end{rSection}
%----------------------------------------------------------------------------------------
% WORK EXPERIENCE SECTION
%----------------------------------------------------------------------------------------
\begin{rSection}{Work Experience}
\begin{rSubsection}{Company}{\date}{Position)}{}
\item description
\item description
\end{rSubsection}
%----------------------------------------------------------------------------------------
% Projects And Seminars
%-----------------------------------------------------------------------------------------
\begin{rSection}{Projects}
\\{\bf Project Title}\\
description\vspace{7pt}
\\{\bf Project Title}\\
description\vspace{7pt}
\end{rSection}
%----------------------------------------------------------------------------------------
% EDUCATION SECTION
%----------------------------------------------------------------------------------------
\begin{rSection}{Education}
{\bf University} \hfill {\date}
\\ Course \hfill
\vspace{7pt}
{\bf University} \hfill {\date}
\\ Course \hfill
\vspace{7pt}
\end{rSection}
%----------------------------------------------------------------------------------------
% TECHNICAL SKILLS SECTION
%----------------------------------------------------------------------------------------
\begin{rSection}{Technical Skills}
\begin{tabular}{ @{} >{\bfseries}l @{\hspace{6ex}} l }
cathegory1 \ & number1, number2 and number3 \\
cathegory2 \ & number1, number2 and number3 \\
\vspace{7pt}
\end{tabular}
\end{rSection}
\end{document}
答案1
可能不是最好的解决方案,但是这是有效的:
\raisebox{-.2\totalheight}[0pt][.3\totalheight]{\includegraphics[width=3cm,height=4cm, right]{jessphoto.jpg}}