pspicture 在 TexLive 2022 (Ubuntu 22.04) 中不起作用，但在 TexLive 2019 中起作用

Question

对于以下代码，我在使用 TexLive 的 Ubuntu 20.04 和 Ubuntu 22.04 中没有得到相同的结果。

\documentclass{article}
\usepackage[left=2.00cm, right=3.00cm, top=4.00cm, bottom=3.00cm,showframe]{geometry}
\usepackage{pstricks-add}
\usepackage{tikz}

\newlength{\pssize}\setlength{\pssize}{1cm}
\newcommand{\logotextformat}{\sffamily \bfseries \large}

\newcommand{\logoimg}[2]{
    \begin{pspicture}(#1,-#2)
        \newrgbcolor{curcolor}{0.88 0.15 0.11}
        \psset{
            unit=0.7pt,
            linestyle=none,
            fillstyle=solid,
            fillcolor=curcolor
        }
        \pscustom{
            \newpath
            \moveto(74, 18)
            \lineto(56, 18)
            \lineto(56, 12)
            \lineto(68, 12)
            \lineto(68, 12)
            \curveto(67, 7)(63, 5)(57, 5)
            \curveto(50, 5)(45, 10)(45, 17)
            \curveto(45, 24)(50, 30)(57, 30)
            \curveto(63, 30)(67, 27)(69, 23)
            \lineto(74, 25)
            \curveto(71, 32)(65, 35)(57, 35)
            \curveto(47, 35)(39, 27)(39, 17)
            \curveto(39, 7)(47, 0)(57, 0)
            \curveto(62, 0)(66, 2)(69, 5)
            \lineto(69, 1)
            \lineto(74, 1)
            \lineto(74, 17)
            \lineto(74, 17)
            \lineto(74, 17)
            \closepath
        }
        \pscustom{
            \newpath
            \moveto(27, 61)
            \lineto(5, 61)
            \lineto(5, 75)
            \lineto(0, 75)
            \lineto(0, 42)
            \lineto(5, 42)
            \lineto(5, 56)
            \lineto(27, 56)
            \lineto(27, 42)
            \lineto(33, 42)
            \lineto(33, 75)
            \lineto(27, 75)
            \closepath
        }
    \end{pspicture}
}

\newcommand{\placelogo}[2]{% \logo{<left>}{<top>}
    \begin{tikzpicture}[remember picture,overlay, align=center,]
        \node(logo) at ([xshift=#1, yshift=-#2] current page.north west)
        [anchor=north west] {\logoimg{#1}{#2}};
    \end{tikzpicture}\vspace*{-\baselineskip}}

\begin{document}
    \placelogo{2cm}{3cm}
\end{document}

建造

我使用以下方式构建项目

latexmk -xelatex test.tex

TeX 3.14159265（TeX Live 2019/Debian）

徽标如预期般清晰可见。

TeX 3.141592653（TeX Live 2022/dev/Debian）

未显示徽标。

Answer 1

考虑用 tikz 命令替换 pstricks 代码，因为你无论如何都在使用 tikz。我已经转录了徽标，见下文，使用如何通过简单的 TikZ 命令实现这一点？。以下输出由当前 TeX 发行版使用pdflatex、xelatex或其他方式生成，无需额外的命令行参数。

\documentclass{article}
\usepackage[left=2.00cm, right=3.00cm, top=4.00cm, bottom=3.00cm,showframe]{geometry}
\usepackage{tikz}

\newcommand{\logoimg}[2]{%
    \begin{tikzpicture}[x=0.7pt,y=0.7pt]%\begin{pspicture}(#1,-#2)
        \definecolor{curcolor}{rgb}{0.88,0.15,0.11} %\newrgbcolor{curcolor}{0.88 0.15 0.11}
        %\psset{
        %    unit=0.7pt,
        %    linestyle=none,
        %    fillstyle=solid,
        %    fillcolor=curcolor
        %  }
        \fill[curcolor] %\pscustom{\newpath
            (74,18)%\moveto(74, 18)
            -- (56,18)%\lineto(56, 18)
            -- (56,12)%\lineto(56, 12)
            -- (68,12)%\lineto(68, 12)
            %-- (68,12)%\lineto(68, 12) again???
            .. controls (67,7) and (63,5) .. (57,5)%\curveto(67, 7)(63, 5)(57, 5)
            .. controls (50,5) and (45,10) .. (45,17)%\curveto(50, 5)(45, 10)(45, 17)
            .. controls (45,24) and (50,30) .. (57,30)%\curveto(45, 24)(50, 30)(57, 30)
            .. controls (63,30) and (67,27) .. (69,23)%\curveto(63, 30)(67, 27)(69, 23)
            -- (74,25)% \lineto(74, 25)
            .. controls (71,32) and (65,35) .. (57,35)%\curveto(71, 32)(65, 35)(57, 35)
            .. controls (47,35) and (39,27) .. (39, 17)%\curveto(47, 35)(39, 27)(39, 17)
            .. controls (39,7) and (47,0) .. (57,0)%\curveto(39, 7)(47, 0)(57, 0)
            .. controls (62,0) and (66,2) .. (69,5)%\curveto(62, 0)(66, 2)(69, 5)
            -- (69,1)%\lineto(69, 1)
            -- (74,1)%\lineto(74, 1)
            -- (74,17)%\lineto(74, 17)
            %-- (74,17)%\lineto(74, 17) again???
            %-- (74,17)%\lineto(74, 17) and again???
            -- cycle%\closepath
        ;%}
        \fill[curcolor]%\pscustom{\newpath
            (27,61)%\moveto(27, 61)
            -- (5,61)%\lineto(5, 61)
            -- (5,75)%\lineto(5, 75)
            -- (0,75)%\lineto(0, 75)
            -- (0,42)%\lineto(0, 42)
            -- (5,42)%\lineto(5, 42)
            -- (5,56)%\lineto(5, 56)
            -- (27,56)%\lineto(27, 56)
            -- (27,42)%\lineto(27, 42)
            -- (33,42)%\lineto(33, 42)
            -- (33,75)%\lineto(33, 75)
            -- (27,75)%\lineto(27, 75)
            -- cycle%\closepath
        ;%}
    \end{tikzpicture}%\end{pspicture}
  }

\newcommand{\placelogo}[2]{% \logo{<left>}{<top>}
    \begin{tikzpicture}[remember picture,overlay, align=center,]
        \node(logo) at ([xshift=#1, yshift=-#2] current page.north west)
        [anchor=south west] {\logoimg{#1}{#2}};
    \end{tikzpicture}}

\begin{document}
    \placelogo{2cm}{3.25cm}
\end{document}

Answer 2

以下是对两个字符进行简单排版的解决方案。您可以使用另一种格式来获得与您的（复杂）绘图相似的字符：

\documentclass{article}
\usepackage[left=2.00cm, right=3.00cm, top=4.00cm, bottom=3.00cm,showframe]{geometry}
\usepackage{tikz}
\definecolor{logocolor}{rgb}{0.88,0.15,0.11}

\newcommand\logotextformat{\fontsize{1cm}{1.1cm}\selectfont\sffamily\bfseries}

\newcommand\logoimg{%
    \makebox(0,0){\logotextformat\sffamily\bfseries\Huge\tabcolsep0pt\tabular{ll}
        \textcolor{logocolor}{H}\\[-12pt] &\textcolor{logocolor}{G}\endtabular}}
    
\newcommand\placelogo[2]{% \logo{<left>}{<top>}
    \begin{tikzpicture}[remember picture,overlay, align=center,]
        \node(logo) at ([xshift=#1, yshift=-#2] current page.north west)
        [anchor=north west] {\logoimg};
    \end{tikzpicture}\vspace*{-\baselineskip}}

\begin{document}
    \placelogo{2.5cm}{2.5cm}
\end{document}