这是我在使用 Revtex 4-2 作为文档类的 AIP 模板时遇到的另一个问题。问题仍然与参考书目有关，就像我的以前的问题。我需要做三件事：
- 使枚举左对齐
- 在枚举号和双项之间留出额外的空格
- 更改参考书目字体大小
这是我的 MWE，与我的没有太大区别以前的问题
\documentclass[%
aip,
% jmp,
% bmf,
% sd,
% rsi,
cp, % Conference Proceedings
amsmath,amssymb,%nobibnotes,
% preprint,%
reprint,%
%author-year,%
%author-numerical,%
]{revtex4-2}
\usepackage{graphicx}% Include figure files
\usepackage{dcolumn}% Align table columns on decimal point
\usepackage{bm}% bold math
%\usepackage[mathlines]{lineno}% Enable numbering of text and display math
%\linenumbers\relax % Commence numbering lines
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
%% Loads a Times-like font. You can also load
%% {newtxtext,newtxtmath}, but not {times},
%% {txfonts} nor {mathtpm} as these packages
%% are obsolete and have been known to cause problems.
\usepackage{mathptmx}
\begin{document}
\title{Title}% Force line breaks with \\
\author{Author's Name} % Write as First name Surname
\email[Corresponding author: ]{[email protected]}
\affiliation{
Replace this text with an author's affiliation
(use complete addresses, including country name or code).% Force line breaks with \\ if necessary
}
\begin{abstract}
This is abstract
\end{abstract}
\maketitle
\section{INTRODUCTION}
In the last couple of decades, the dynamics of magnetic [1-5]. \vphantom{\cite{zhu2012study, handoko2015scanning, zhang2017spin, szambolics2009domain, metaxas2007creep}} Next sentence ...
\section{Conclusion}
In this section we welcome you to include a summary of the end results of your research.
\begin{acknowledgments}
This is something to acknowledge.
\end{acknowledgments}
\nocite{*}
\bibliography{aipsamp}% Produces the bibliography via BibTeX.
\end{document}
%
% ****** End of file aipsamp.tex ******
和 aipsamp.bib
@article{zhu2012study,
title={The study of perpendicular magnetic anisotropy in CoFeB sandwiched by MgO and tantalum layers using polarized neutron reflectometry},
author={Zhu et al., T},
journal={Appl. Phys. Lett.},
volume={100},
number={20},
pages={202406},
year={2012},
publisher={American Institute of Physics}
} %Applied Physics Letters
@article{handoko2015scanning,
title={Scanning transmission X-ray microscopy study of the stretched magnetic-domain structure of Co/Pt multilayers under an in-plane field},
author={Handoko et al., Djati},
journal={J. Korean. Phys. Soc.},
volume={66},
pages={1732–1735},
year={2015},
publisher={Springer}
} %Journal of the Korean Physical Society
@article{zhang2017spin,
title={Spin-orbit-torque-induced magnetic domain wall motion in Ta/CoFe nanowires with sloped perpendicular magnetic anisotropy},
author={Zhang\text{,} S. Luo\text{,} X. Yang \text{and} C. Yang, Yue},
journal={Sci. Rep.},
volume={7},
number={1},
pages={2047},
year={2017},
publisher={Nature Publishing Group UK London}
} %Scientific Reports
@article{fukami2008micromagnetic,
title={Micromagnetic analysis of current driven domain wall motion in nanostrips with perpendicular magnetic anisotropy},
author={Fukami\text{,} T. Suzuki\text{,} N. Ohshima\text{,} K. Nagahara \text{and} N. Ishiwata, S},
journal={J. Appl. Phys.},
volume={103},
number={7},
pages={07E718},
year={2008},
publisher={American Institute of Physics}
} %Journal of Applied Physics
@article{szambolics2009domain,
title={Domain wall motion in ferromagnetic systems with perpendicular magnetization},
author={Szambolics\text{,} J. C. Toussaint\text{,} A. Marty\text{,} I. M. Miron \text{and} L. D. Buda-Prejbeanu, Helga},
journal={J. Magn. Magn. Mater.},
volume={321},
number={13},
pages={1912–1918},
year={2009},
publisher={Elsevier}
} %Journal of magnetism and magnetic materials
@article{metaxas2007creep,
title={Creep and flow regimes of magnetic domain-wall motion in ultrathin Pt/Co/Pt films with perpendicular anisotropy},
author={Metaxas et al., P J},
journal={Phys. Rev. Lett.},
volume={99},
number={21},
pages={217208},
year={2007},
publisher={APS}
} %Physical review letters
@article{burrowes2013low,
title={Low depinning fields in Ta-CoFeB-MgO ultrathin films with perpendicular magnetic anisotropy},
author={Burrowes et al., C},
journal={Appl. Phys. Lett.},
volume={103},
number={18},
pages={182401},
year={2013},
publisher={American Institute of Physics}
} %Applied Physics Letters
@article{hartmann2019creep,
title={Creep of chiral domain walls},
author={Hartmann\text{,} R. A. Duine\text{,} M. J. Meijer\text{,} H. J. Swagten \text{and} R. Lavrijsen, D M},
journal={Phys. Rev. B},
volume={100},
number={9},
pages={094417},
year={2019},
publisher={APS}
} %Physical Review B
@article{wang2014role,
title={The role of inhomogeneity of perpendicular anisotropy in magnetic properties of ultra thin CoFeB film},
author={Wang\text{,} D. Wei\text{,} K. Z. Gao\text{,} J. Cao \text{and} F. Wei, Y},
journal={J. Appl. Phys.},
volume={115},
number={5},
pages={053901},
year={2014},
publisher={American Institute of Physics}
} %Journal of Applied Physics
@misc{donahue1999oommf,
title={OOMMF User's Guide, Version 1.0},
author={Donahue, Michael and Porter, Donald},
year={1999},
publisher={National Institute of Standards and Technology Gaithersburg, MD}
}
@article{gilbert2004phenomenological,
title={A phenomenological theory of damping in ferromagnetic materials},
author={Gilbert, Thomas L},
journal={IEEE Trans. Magn.},
volume={40},
number={6},
pages={3443–3449},
year={2004},
publisher={IEEE}
} %IEEE Transactions on Magnetics
因此，
我需要将枚举像这样向左对齐，
并像这样在枚举和双项之间添加空格。
确切地说，我需要蓝色部分的长度为 0.75 厘米。我还希望字体大小为 10，但显然默认值为 8。我试过了，\fontsize{*the fontsize*}{12}\selectfont但字体大小没有改变。
如果这是一个正常的枚举环境或类似环境，我知道如何做到这一点。但似乎 Revtex4-2 使事情变得非常复杂。我尝试从 biblatex.sty 修改 \bibliography 的语法，例如 labelwidth、biblabel 等，但仍然不起作用。有人能帮我吗？
免责声明：我正在使用 Overleaf。项目中只有两个文件，主.tex文件和aipsamp.bib文件。
编辑：我使用 aipnum4-2 作为参考书目样式。您可以下载它这里。