我正在使用 overleaf 编写 Latex 文档，并以以下方式插入一些参考文献：
%% bare_jrnl.tex
%% V1.4b
%% 2015/08/26
%% by Michael Shell
%% see http://www.michaelshell.org/
%% for current contact information.
%%
%% This is a skeleton file demonstrating the use of IEEEtran.cls
%% (requires IEEEtran.cls version 1.8b or later) with an IEEE
%% journal paper.
%%
%% Support sites:
%% http://www.michaelshell.org/tex/ieeetran/
%% http://www.ctan.org/pkg/ieeetran
%% and
%% http://www.ieee.org/
%%*************************************************************************
%% Legal Notice:
%% This code is offered as-is without any warranty either expressed or
%% implied; without even the implied warranty of MERCHANTABILITY or
%% FITNESS FOR A PARTICULAR PURPOSE!
%% User assumes all risk.
%% In no event shall the IEEE or any contributor to this code be liable for
%% any damages or losses, including, but not limited to, incidental,
%% consequential, or any other damages, resulting from the use or misuse
%% of any information contained here.
%%
%% All comments are the opinions of their respective authors and are not
%% necessarily endorsed by the IEEE.
%%
%% This work is distributed under the LaTeX Project Public License (LPPL)
%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used,
%% distributed and modified. A copy of the LPPL, version 1.3, is included
%% in the base LaTeX documentation of all distributions of LaTeX released
%% 2003/12/01 or later.
%% Retain all contribution notices and credits.
%% ** Modified files should be clearly indicated as such, including **
%% ** renaming them and changing author support contact information. **
%%*************************************************************************
% *** Authors should verify (and, if needed, correct) their LaTeX system ***
% *** with the testflow diagnostic prior to trusting their LaTeX platform ***
% *** with production work. The IEEE's font choices and paper sizes can ***
% *** trigger bugs that do not appear when using other class files. *** ***
% The testflow support page is at:
% http://www.michaelshell.org/tex/testflow/
\documentclass[journal]{IEEEtran}
%
% If IEEEtran.cls has not been installed into the LaTeX system files,
% manually specify the path to it like:
% \documentclass[journal]{../sty/IEEEtran}
% Some very useful LaTeX packages include:
% (uncomment the ones you want to load)
% *** MISC UTILITY PACKAGES ***
%
%\usepackage{ifpdf}
% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional
% compilation based on whether the output is pdf or dvi.
% usage:
% \ifpdf
% % pdf code
% \else
% % dvi code
% \fi
% The latest version of ifpdf.sty can be obtained from:
% http://www.ctan.org/pkg/ifpdf
% Also, note that IEEEtran.cls V1.7 and later provides a builtin
% \ifCLASSINFOpdf conditional that works the same way.
% When switching from latex to pdflatex and vice-versa, the compiler may
% have to be run twice to clear warning/error messages.
% *** CITATION PACKAGES ***
%
%\usepackage{cite}
% cite.sty was written by Donald Arseneau
% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package
% \cite{} output to follow that of the IEEE. Loading the cite package will
% result in citation numbers being automatically sorted and properly
% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using
% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's
% \cite will automatically add leading space, if needed. Use cite.sty's
% noadjust option (cite.sty V3.8 and later) if you want to turn this off
% such as if a citation ever needs to be enclosed in parenthesis.
% cite.sty is already installed on most LaTeX systems. Be sure and use
% version 5.0 (2009-03-20) and later if using hyperref.sty.
% The latest version can be obtained at:
% http://www.ctan.org/pkg/cite
% The documentation is contained in the cite.sty file itself.
% *** GRAPHICS RELATED PACKAGES ***
%
\ifCLASSINFOpdf
% \usepackage[pdftex]{graphicx}
% declare the path(s) where your graphic files are
% \graphicspath{{../pdf/}{../jpeg/}}
% and their extensions so you won't have to specify these with
% every instance of \includegraphics
% \DeclareGraphicsExtensions{.pdf,.jpeg,.png}
\else
% or other class option (dvipsone, dvipdf, if not using dvips). graphicx
% will default to the driver specified in the system graphics.cfg if no
% driver is specified.
% \usepackage[dvips]{graphicx}
% declare the path(s) where your graphic files are
% \graphicspath{{../eps/}}
% and their extensions so you won't have to specify these with
% every instance of \includegraphics
% \DeclareGraphicsExtensions{.eps}
\fi
% graphicx was written by David Carlisle and Sebastian Rahtz. It is
% required if you want graphics, photos, etc. graphicx.sty is already
% installed on most LaTeX systems. The latest version and documentation
% can be obtained at:
% http://www.ctan.org/pkg/graphicx
% Another good source of documentation is "Using Imported Graphics in
% LaTeX2e" by Keith Reckdahl which can be found at:
% http://www.ctan.org/pkg/epslatex
%
% latex, and pdflatex in dvi mode, support graphics in encapsulated
% postscript (.eps) format. pdflatex in pdf mode supports graphics
% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure
% that all non-photo figures use a vector format (.eps, .pdf, .mps) and
% not a bitmapped formats (.jpeg, .png). The IEEE frowns on bitmapped formats
% which can result in "jaggedy"/blurry rendering of lines and letters as
% well as large increases in file sizes.
%
% You can find documentation about the pdfTeX application at:
% http://www.tug.org/applications/pdftex
% *** MATH PACKAGES ***
%
%\usepackage{amsmath}
% A popular package from the American Mathematical Society that provides
% many useful and powerful commands for dealing with mathematics.
%
% Note that the amsmath package sets \interdisplaylinepenalty to 10000
% thus preventing page breaks from occurring within multiline equations. Use:
%\interdisplaylinepenalty=2500
% after loading amsmath to restore such page breaks as IEEEtran.cls normally
% does. amsmath.sty is already installed on most LaTeX systems. The latest
% version and documentation can be obtained at:
% http://www.ctan.org/pkg/amsmath
% *** SPECIALIZED LIST PACKAGES ***
%
%\usepackage{algorithmic}
% algorithmic.sty was written by Peter Williams and Rogerio Brito.
% This package provides an algorithmic environment fo describing algorithms.
% You can use the algorithmic environment in-text or within a figure
% environment to provide for a floating algorithm. Do NOT use the algorithm
% floating environment provided by algorithm.sty (by the same authors) or
% algorithm2e.sty (by Christophe Fiorio) as the IEEE does not use dedicated
% algorithm float types and packages that provide these will not provide
% correct IEEE style captions. The latest version and documentation of
% algorithmic.sty can be obtained at:
% http://www.ctan.org/pkg/algorithms
% Also of interest may be the (relatively newer and more customizable)
% algorithmicx.sty package by Szasz Janos:
% http://www.ctan.org/pkg/algorithmicx
% *** ALIGNMENT PACKAGES ***
%
%\usepackage{array}
% Frank Mittelbach's and David Carlisle's array.sty patches and improves
% the standard LaTeX2e array and tabular environments to provide better
% appearance and additional user controls. As the default LaTeX2e table
% generation code is lacking to the point of almost being broken with
% respect to the quality of the end results, all users are strongly
% advised to use an enhanced (at the very least that provided by array.sty)
% set of table tools. array.sty is already installed on most systems. The
% latest version and documentation can be obtained at:
% http://www.ctan.org/pkg/array
% IEEEtran contains the IEEEeqnarray family of commands that can be used to
% generate multiline equations as well as matrices, tables, etc., of high
% quality.
% *** SUBFIGURE PACKAGES ***
%\ifCLASSOPTIONcompsoc
% \usepackage[caption=false,font=normalsize,labelfont=sf,textfont=sf]{subfig}
%\else
% \usepackage[caption=false,font=footnotesize]{subfig}
%\fi
% subfig.sty, written by Steven Douglas Cochran, is the modern replacement
% for subfigure.sty, the latter of which is no longer maintained and is
% incompatible with some LaTeX packages including fixltx2e. However,
% subfig.sty requires and automatically loads Axel Sommerfeldt's caption.sty
% which will override IEEEtran.cls' handling of captions and this will result
% in non-IEEE style figure/table captions. To prevent this problem, be sure
% and invoke subfig.sty's "caption=false" package option (available since
% subfig.sty version 1.3, 2005/06/28) as this is will preserve IEEEtran.cls
% handling of captions.
% Note that the Computer Society format requires a larger sans serif font
% than the serif footnote size font used in traditional IEEE formatting
% and thus the need to invoke different subfig.sty package options depending
% on whether compsoc mode has been enabled.
%
% The latest version and documentation of subfig.sty can be obtained at:
% http://www.ctan.org/pkg/subfig
% *** FLOAT PACKAGES ***
%
%\usepackage{fixltx2e}
% fixltx2e, the successor to the earlier fix2col.sty, was written by
% Frank Mittelbach and David Carlisle. This package corrects a few problems
% in the LaTeX2e kernel, the most notable of which is that in current
% LaTeX2e releases, the ordering of single and double column floats is not
% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a
% single column figure to be placed prior to an earlier double column
% figure.
% Be aware that LaTeX2e kernels dated 2015 and later have fixltx2e.sty's
% corrections already built into the system in which case a warning will
% be issued if an attempt is made to load fixltx2e.sty as it is no longer
% needed.
% The latest version and documentation can be found at:
% http://www.ctan.org/pkg/fixltx2e
%\usepackage{stfloats}
% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e
% the ability to do double column floats at the bottom of the page as well
% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in
% LaTeX2e). It also provides a command:
%\fnbelowfloat
% to enable the placement of footnotes below bottom floats (the standard
% LaTeX2e kernel puts them above bottom floats). This is an invasive package
% which rewrites many portions of the LaTeX2e float routines. It may not work
% with other packages that modify the LaTeX2e float routines. The latest
% version and documentation can be obtained at:
% http://www.ctan.org/pkg/stfloats
% Do not use the stfloats baselinefloat ability as the IEEE does not allow
% \baselineskip to stretch. Authors submitting work to the IEEE should note
% that the IEEE rarely uses double column equations and that authors should try
% to avoid such use. Do not be tempted to use the cuted.sty or midfloat.sty
% packages (also by Sigitas Tolusis) as the IEEE does not format its papers in
% such ways.
% Do not attempt to use stfloats with fixltx2e as they are incompatible.
% Instead, use Morten Hogholm'a dblfloatfix which combines the features
% of both fixltx2e and stfloats:
%
% \usepackage{dblfloatfix}
% The latest version can be found at:
% http://www.ctan.org/pkg/dblfloatfix
%\ifCLASSOPTIONcaptionsoff
% \usepackage[nomarkers]{endfloat}
% \let\MYoriglatexcaption\caption
% \renewcommand{\caption}[2][\relax]{\MYoriglatexcaption[#2]{#2}}
%\fi
% endfloat.sty was written by James Darrell McCauley, Jeff Goldberg and
% Axel Sommerfeldt. This package may be useful when used in conjunction with
% IEEEtran.cls' captionsoff option. Some IEEE journals/societies require that
% submissions have lists of figures/tables at the end of the paper and that
% figures/tables without any captions are placed on a page by themselves at
% the end of the document. If needed, the draftcls IEEEtran class option or
% \CLASSINPUTbaselinestretch interface can be used to increase the line
% spacing as well. Be sure and use the nomarkers option of endfloat to
% prevent endfloat from "marking" where the figures would have been placed
% in the text. The two hack lines of code above are a slight modification of
% that suggested by in the endfloat docs (section 8.4.1) to ensure that
% the full captions always appear in the list of figures/tables - even if
% the user used the short optional argument of \caption[]{}.
% IEEE papers do not typically make use of \caption[]'s optional argument,
% so this should not be an issue. A similar trick can be used to disable
% captions of packages such as subfig.sty that lack options to turn off
% the subcaptions:
% For subfig.sty:
% \let\MYorigsubfloat\subfloat
% \renewcommand{\subfloat}[2][\relax]{\MYorigsubfloat[]{#2}}
% However, the above trick will not work if both optional arguments of
% the \subfloat command are used. Furthermore, there needs to be a
% description of each subfigure *somewhere* and endfloat does not add
% subfigure captions to its list of figures. Thus, the best approach is to
% avoid the use of subfigure captions (many IEEE journals avoid them anyway)
% and instead reference/explain all the subfigures within the main caption.
% The latest version of endfloat.sty and its documentation can obtained at:
% http://www.ctan.org/pkg/endfloat
%
% The IEEEtran \ifCLASSOPTIONcaptionsoff conditional can also be used
% later in the document, say, to conditionally put the References on a
% page by themselves.
% *** PDF, URL AND HYPERLINK PACKAGES ***
%
%\usepackage{url}
% url.sty was written by Donald Arseneau. It provides better support for
% handling and breaking URLs. url.sty is already installed on most LaTeX
% systems. The latest version and documentation can be obtained at:
% http://www.ctan.org/pkg/url
% Basically, \url{my_url_here}.
% *** Do not adjust lengths that control margins, column widths, etc. ***
% *** Do not use packages that alter fonts (such as pslatex). ***
% There should be no need to do such things with IEEEtran.cls V1.6 and later.
% (Unless specifically asked to do so by the journal or conference you plan
% to submit to, of course. )
% correct bad hyphenation here
\hyphenation{op-tical net-works semi-conduc-tor}
\begin{document}
%
% paper title
% Titles are generally capitalized except for words such as a, an, and, as,
% at, but, by, for, in, nor, of, on, or, the, to and up, which are usually
% not capitalized unless they are the first or last word of the title.
% Linebreaks \\ can be used within to get better formatting as desired.
% Do not put math or special symbols in the title.
\title{Bare Demo of IEEEtran.cls\\ for IEEE Journals}
%
%
% author names and IEEE memberships
% note positions of commas and nonbreaking spaces ( ~ ) LaTeX will not break
% a structure at a ~ so this keeps an author's name from being broken across
% two lines.
% use \thanks{} to gain access to the first footnote area
% a separate \thanks must be used for each paragraph as LaTeX2e's \thanks
% was not built to handle multiple paragraphs
%
\author{Michael~Shell,~\IEEEmembership{Member,~IEEE,}
John~Doe,~\IEEEmembership{Fellow,~OSA,}
and~Jane~Doe,~\IEEEmembership{Life~Fellow,~IEEE}% <-this % stops a space
\thanks{M. Shell was with the Department
of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta,
GA, 30332 USA e-mail: (see http://www.michaelshell.org/contact.html).}% <-this % stops a space
\thanks{J. Doe and J. Doe are with Anonymous University.}% <-this % stops a space
\thanks{Manuscript received April 19, 2005; revised August 26, 2015.}}
% note the % following the last \IEEEmembership and also \thanks -
% these prevent an unwanted space from occurring between the last author name
% and the end of the author line. i.e., if you had this:
%
% \author{....lastname \thanks{...} \thanks{...} }
% ^------------^------------^----Do not want these spaces!
%
% a space would be appended to the last name and could cause every name on that
% line to be shifted left slightly. This is one of those "LaTeX things". For
% instance, "\textbf{A} \textbf{B}" will typeset as "A B" not "AB". To get
% "AB" then you have to do: "\textbf{A}\textbf{B}"
% \thanks is no different in this regard, so shield the last } of each \thanks
% that ends a line with a % and do not let a space in before the next \thanks.
% Spaces after \IEEEmembership other than the last one are OK (and needed) as
% you are supposed to have spaces between the names. For what it is worth,
% this is a minor point as most people would not even notice if the said evil
% space somehow managed to creep in.
% The paper headers
\markboth{Journal of \LaTeX\ Class Files,~Vol.~14, No.~8, August~2015}%
{Shell \MakeLowercase{\textit{et al.}}: Bare Demo of IEEEtran.cls for IEEE Journals}
% The only time the second header will appear is for the odd numbered pages
% after the title page when using the twoside option.
%
% *** Note that you probably will NOT want to include the author's ***
% *** name in the headers of peer review papers. ***
% You can use \ifCLASSOPTIONpeerreview for conditional compilation here if
% you desire.
% If you want to put a publisher's ID mark on the page you can do it like
% this:
%\IEEEpubid{0000--0000/00\$00.00~\copyright~2015 IEEE}
% Remember, if you use this you must call \IEEEpubidadjcol in the second
% column for its text to clear the IEEEpubid mark.
% use for special paper notices
%\IEEEspecialpapernotice{(Invited Paper)}
% make the title area
\maketitle
% As a general rule, do not put math, special symbols or citations
% in the abstract or keywords.
\begin{abstract}
The abstract goes here.
\end{abstract}
% Note that keywords are not normally used for peerreview papers.
\begin{IEEEkeywords}
IEEE, IEEEtran, journal, \LaTeX, paper, template.
\end{IEEEkeywords}
% For peer review papers, you can put extra information on the cover
% page as needed:
% \ifCLASSOPTIONpeerreview
% \begin{center} \bfseries EDICS Category: 3-BBND \end{center}
% \fi
%
% For peerreview papers, this IEEEtran command inserts a page break and
% creates the second title. It will be ignored for other modes.
\IEEEpeerreviewmaketitle
\section{Introduction}
% The very first letter is a 2 line initial drop letter followed
% by the rest of the first word in caps.
%
% form to use if the first word consists of a single letter:
% \IEEEPARstart{A}{demo} file is ....
%
% form to use if you need the single drop letter followed by
% normal text (unknown if ever used by the IEEE):
% \IEEEPARstart{A}{}demo file is ....
%
% Some journals put the first two words in caps:
% \IEEEPARstart{T}{his demo} file is ....
%
% Here we have the typical use of a "T" for an initial drop letter
% and "HIS" in caps to complete the first word.
\IEEEPARstart{T}{his} demo file is intended to serve as a ``starter file''
for IEEE journal papers produced under \LaTeX\ using
IEEEtran.cls version 1.8b and later.
% You must have at least 2 lines in the paragraph with the drop letter
% (should never be an issue)
I wish you the best of success.
\hfill mds
\hfill August 26, 2015
\subsection{Subsection Heading Here}
Subsection text here.
% needed in second column of first page if using \IEEEpubid
%\IEEEpubidadjcol
\subsubsection{Subsubsection Heading Here}
Subsubsection text here.
% An example of a floating figure using the graphicx package.
% Note that \label must occur AFTER (or within) \caption.
% For figures, \caption should occur after the \includegraphics.
% Note that IEEEtran v1.7 and later has special internal code that
% is designed to preserve the operation of \label within \caption
% even when the captionsoff option is in effect. However, because
% of issues like this, it may be the safest practice to put all your
% \label just after \caption rather than within \caption{}.
%
% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class
% option should be used if it is desired that the figures are to be
% displayed while in draft mode.
%
%\begin{figure}[!t]
%\centering
%\includegraphics[width=2.5in]{myfigure}
% where an .eps filename suffix will be assumed under latex,
% and a .pdf suffix will be assumed for pdflatex; or what has been declared
% via \DeclareGraphicsExtensions.
%\caption{Simulation results for the network.}
%\label{fig_sim}
%\end{figure}
% Note that the IEEE typically puts floats only at the top, even when this
% results in a large percentage of a column being occupied by floats.
% An example of a double column floating figure using two subfigures.
% (The subfig.sty package must be loaded for this to work.)
% The subfigure \label commands are set within each subfloat command,
% and the \label for the overall figure must come after \caption.
% \hfil is used as a separator to get equal spacing.
% Watch out that the combined width of all the subfigures on a
% line do not exceed the text width or a line break will occur.
%
%\begin{figure*}[!t]
%\centering
%\subfloat[Case I]{\includegraphics[width=2.5in]{box}%
%\label{fig_first_case}}
%\hfil
%\subfloat[Case II]{\includegraphics[width=2.5in]{box}%
%\label{fig_second_case}}
%\caption{Simulation results for the network.}
%\label{fig_sim}
%\end{figure*}
%
% Note that often IEEE papers with subfigures do not employ subfigure
% captions (using the optional argument to \subfloat[]), but instead will
% reference/describe all of them (a), (b), etc., within the main caption.
% Be aware that for subfig.sty to generate the (a), (b), etc., subfigure
% labels, the optional argument to \subfloat must be present. If a
% subcaption is not desired, just leave its contents blank,
% e.g., \subfloat[].
% An example of a floating table. Note that, for IEEE style tables, the
% \caption command should come BEFORE the table and, given that table
% captions serve much like titles, are usually capitalized except for words
% such as a, an, and, as, at, but, by, for, in, nor, of, on, or, the, to
% and up, which are usually not capitalized unless they are the first or
% last word of the caption. Table text will default to \footnotesize as
% the IEEE normally uses this smaller font for tables.
% The \label must come after \caption as always.
%
%\begin{table}[!t]
%% increase table row spacing, adjust to taste
%\renewcommand{\arraystretch}{1.3}
% if using array.sty, it might be a good idea to tweak the value of
% \extrarowheight as needed to properly center the text within the cells
%\caption{An Example of a Table}
%\label{table_example}
%\centering
%% Some packages, such as MDW tools, offer better commands for making tables
%% than the plain LaTeX2e tabular which is used here.
%\begin{tabular}{|c||c|}
%\hline
%One & Two\\
%\hline
%Three & Four\\
%\hline
%\end{tabular}
%\end{table}
% Note that the IEEE does not put floats in the very first column
% - or typically anywhere on the first page for that matter. Also,
% in-text middle ("here") positioning is typically not used, but it
% is allowed and encouraged for Computer Society conferences (but
% not Computer Society journals). Most IEEE journals/conferences use
% top floats exclusively.
% Note that, LaTeX2e, unlike IEEE journals/conferences, places
% footnotes above bottom floats. This can be corrected via the
% \fnbelowfloat command of the stfloats package.
\section{Conclusion}
The conclusion goes here.
% if have a single appendix:
%\appendix[Proof of the Zonklar Equations]
% or
%\appendix % for no appendix heading
% do not use \section anymore after \appendix, only \section*
% is possibly needed
% use appendices with more than one appendix
% then use \section to start each appendix
% you must declare a \section before using any
% \subsection or using \label (\appendices by itself
% starts a section numbered zero.)
%
\appendices
\section{Proof of the First Zonklar Equation}
Appendix one text goes here.
% you can choose not to have a title for an appendix
% if you want by leaving the argument blank
\section{}
Appendix two text goes here.
% use section* for acknowledgment
\section*{Acknowledgment}
The authors would like to thank...
% Can use something like this to put references on a page
% by themselves when using endfloat and the captionsoff option.
\ifCLASSOPTIONcaptionsoff
\newpage
\fi
% trigger a \newpage just before the given reference
% number - used to balance the columns on the last page
% adjust value as needed - may need to be readjusted if
% the document is modified later
%\IEEEtriggeratref{8}
% The "triggered" command can be changed if desired:
%\IEEEtriggercmd{\enlargethispage{-5in}}
% references section
% can use a bibliography generated by BibTeX as a .bbl file
% BibTeX documentation can be easily obtained at:
% http://mirror.ctan.org/biblio/bibtex/contrib/doc/
% The IEEEtran BibTeX style support page is at:
% http://www.michaelshell.org/tex/ieeetran/bibtex/
%\bibliographystyle{IEEEtran}
% argument is your BibTeX string definitions and bibliography database(s)
%\bibliography{IEEEabrv,../bib/paper}
%
% <OR> manually copy in the resultant .bbl file
% set second argument of \begin to the number of references
% (used to reserve space for the reference number labels box)
\begin{thebibliography}{1}
\bibitem{1}
M. J. O'Donnell et al., "Risk factors for ischaemic and intracerebral haemorrhagic stroke in 22 countries (the INTERSTROKE study): a case-control study," The Lancet, vol. 376, no. 9735, pp. 112-123, 2010/07/10/ 2010, doi: https://doi.org/10.1016/S0140-6736(10)60834-3.
\bibitem{2}
T. Liu, W. Fan, and C. Wu, "A hybrid machine learning approach to cerebral stroke prediction based on imbalanced medical dataset," Artificial Intelligence in Medicine, vol. 101, p. 101723, 2019/11/01/ 2019, doi: https://doi.org/10.1016/j..2019.101723.
\bibitem{3}
Y. Turana et al., "Hypertension and stroke in Asia: A comprehensive review from HOPE Asia," (in eng), J Clin Hypertens (Greenwich), vol. 23, no. 3, pp. 513-521, Mar 2021, doi: 10.1111/jch.14099.
\end{thebibliography}
% biography section
%
% If you have an EPS/PDF photo (graphicx package needed) extra braces are
% needed around the contents of the optional argument to biography to prevent
% the LaTeX parser from getting confused when it sees the complicated
% \includegraphics command within an optional argument. (You could create
% your own custom macro containing the \includegraphics command to make things
% simpler here.)
%\begin{IEEEbiography}[{\includegraphics[width=1in,height=1.25in,clip,keepaspectratio]{mshell}}]{Michael Shell}
% or if you just want to reserve a space for a photo:
\begin{IEEEbiography}{Michael Shell}
Biography text here.
\end{IEEEbiography}
% if you will not have a photo at all:
\begin{IEEEbiographynophoto}{John Doe}
Biography text here.
\end{IEEEbiographynophoto}
% insert where needed to balance the two columns on the last page with
% biographies
%\newpage
\begin{IEEEbiographynophoto}{Jane Doe}
Biography text here.
\end{IEEEbiographynophoto}
% You can push biographies down or up by placing
% a \vfill before or after them. The appropriate
% use of \vfill depends on what kind of text is
% on the last page and whether or not the columns
% are being equalized.
%\vfill
% Can be used to pull up biographies so that the bottom of the last one
% is flush with the other column.
%\enlargethispage{-5in}
% that's all folks
\end{document}
而在正文中，我通过输入 来引用这些文章\cite{1/2/3}。我觉得这样很好。但是，如果你关闭文档并再次输入，引用项将变成：
\begin{thebibliography}{1}
\bibitem{1}
M. J. O'Donnell et al., "Risk factors for ischaemic and intracerebral haemorrhagic stroke in 22 countries (the INTERSTROKE study): a case-control study," The Lancet, vol. 376, no. 9735, pp. 112-123, 2010/07/10/ 2010, doi: https://doi.org/10.1016/S0140-6736(10)60834-3
.
\bibitem{2}
T. Liu, W. Fan, and C. Wu, "A hybrid machine learning approach to cerebral stroke prediction based on imbalanced medical dataset," Artificial Intelligence in Medicine, vol. 101, p. 101723, 2019/11/01/ 2019, doi: https://doi.org/10.1016/j..2019.101723
.
\bibitem{3}
Y. Turana et al., "Hypertension and stroke in Asia: A comprehensive review from HOPE Asia," (in eng), J Clin Hypertens (Greenwich), vol. 23, no. 3, pp. 513-521, Mar 2021, doi: 10.1111/jch.14099
.
\end{thebibliography}
您可以轻松看出句号的位置发生了很大变化。有人知道这是什么原因吗？供您参考，我使用的是 overleaf 上的 IEEE 期刊论文模板，并在上面附上了一个最小但完整的 latex 代码。