我有一台 Summit Extreme 路由器,最近收到以下错误:
<WARN:ESRP> edp.c 2892: PREMASTER-->Master : VLAN=Buyers1 [HIGHER Priority]
<WARN:ESRP> edp.c 2780: MASTER-->slave : VLAN=Buyers1 [Master PDU in master state]
<WARN:RIP > ripDeleteRt: SIOCDELRT (S_objLib_OBJ_TIMEOUT)
它在每个 vlan 上都出现前两个错误。
我的整个网络通常都会开始失去连接。最近唯一发生的变化是有人在我们的防火墙上设置了 NAT 策略,以指向 192.168.225.x IP 地址。这会导致此错误吗?此外,错误是什么意思?
答案1
这些消息是因为主交换机正在故障转移到从交换机。从交换机发出了大量 TX 错误。我认为从交换机也发出了错误的 ESRP 请求,使得主交换机看起来像是发生故障。从交换机发出了太多 TX 错误,这就是我的网络失去连接的原因。
我解开了从属设备并禁用了 ESRP。我最近更换了两个交换机,压力水平/功耗都下降了。
答案2
根据:http://www.extremenetworks.com/libraries/services/ErrorMessageDecoderRev5.pdf
Failed to Delete RIP Route
ripExpireRt: SIOCDELRT (S_errno_EWOULDBLOCK)
Software Version
ExtremeWare 6.0 and later
Hardware Version
All
Explanation
The system failed to delete RIP route from the IP routing table. The RIP route to be deleted is not found
in the Kernel routing table.
Action
Verify whether the expired RIP route entry is present in the IP routing table.
If any invalid route entry is present, reboot the switch.