有一台 Sun X4100,nge0
其接口已配置并正常工作。服务器背面有一组 4 个网络插孔,nge0
对应于以太网端口 0。
我尝试使用启用以太网端口 3ifconfig nge3 plumb
并收到输出
ifconfig: plumb: nge3: Invalid argument
但我能够配置,nge1
没有问题。
以下是输出prtconf -D
i86pc (driver name: rootnex)
scsi_vhci, instance #0 (driver name: scsi_vhci)
isa, instance #0 (driver name: isa)
asy, instance #0 (driver name: asy)
motherboard
pci, instance #0 (driver name: npe)
pci10de,5e
pci10de,cb84
pci10de,cb84
pci108e,cb84, instance #0 (driver name: ohci)
device, instance #0 (driver name: usb_mid)
keyboard, instance #0 (driver name: hid)
mouse, instance #1 (driver name: hid)
pci108e,cb84, instance #0 (driver name: ehci)
pci-ide, instance #0 (driver name: pci-ide)
ide (driver name: ata)
ide (driver name: ata)
pci10de,5c, instance #0 (driver name: pci_pci)
display, instance #0 (driver name: vgatext)
pci10de,cb84, instance #0 (driver name: nge)
pci10de,5d (driver name: pcie_pci)
pci10de,5d (driver name: pcie_pci)
pci10de,5d (driver name: pcie_pci)
pci10de,5d (driver name: pcie_pci)
pci1022,1200
pci1022,1201
pci1022,1202
pci1022,1203
pci1022,1204
pci, instance #1 (driver name: npe)
pci10de,5e
pci10de,cb84
pci10de,cb84, instance #1 (driver name: nge)
pci10de,5d (driver name: pcie_pci)
pci10de,5d (driver name: pcie_pci)
pci10de,5d (driver name: pcie_pci)
pci10de,5d (driver name: pcie_pci)
pci1022,7458, instance #1 (driver name: pci_pci)
pci1022,7459
pci1022,7458, instance #2 (driver name: pci_pci)
pci8086,1011, instance #0 (driver name: e1000g)
pci8086,1011, instance #1 (driver name: e1000g)
pci1000,3060, instance #0 (driver name: mpt)
sd, instance #0 (driver name: sd)
sd, instance #2 (driver name: sd)
sd, instance #3 (driver name: sd)
pci1022,7459
iscsi, instance #0 (driver name: iscsi)
pseudo, instance #0 (driver name: pseudo)
options, instance #0 (driver name: options)
xsvc, instance #0 (driver name: xsvc)
objmgr, instance #0 (driver name: objmgr)
used-resources
cpus
cpu, instance #0
cpu, instance #1
cpu, instance #2
cpu, instance #3
关于如何配置端口 3 有什么想法吗?
答案1
根据您的 prtconf 信息,您有 2 个 nge 接口( nge0 和 nge1 )和两个 e1000g 接口( e1000g0 和 e1000g1 )。
尝试连接它们,它们应该可以工作。
ifconfig e1000g0 plumb
ifconfig e1000g1 plumb
另外,如果你有 Solaris 10,可以使用以下命令更轻松地检查网络接口dladm show-dev