/opt 分区未安装在 DD-WRT v24-sp2 中

/opt 分区未安装在 DD-WRT v24-sp2 中

我在尝试在运行 DD-WRT v24-sp2(4MB 闪存、32MB RAM)的 TP-Link TL-WR841n v8 上安装 optware 软件包时遇到问题。我通过 telnet 执行了以下操作:

nvram set jffs_mounted=1
nvram set enable_jffs2=1
nvram set sys_enable_jffs2=1
nvram set clean_jffs2=1
nvram set sys_clean_jffs2=1
nvram commit
reboot

重启后:

mkdir /jffs/opt
mount -o bind /jffs/opt /opt

当我下载并运行 optware-install-ddwrt.sh 时,它会显示以下日志:

Checking system config ...
Using 192.168.1.1 as default gateway.
Using the following nameserver(s):
nameserver 192.168.115.1
Warning: local nameserver is different than gateway!
Check config or enter:
sed -i s/192.168.*/192.168.1.1/ /tmp/resolv.conf
and try again - or wait to see if your download continues anyway.
Error: /opt partition not mounted.
for running Optware on JFFS (not recommended), Enter
    mkdir /jffs/opt
    mount -o bind /jffs/opt /opt
to correct this.

我已经进入了mkdir /jffs/opt安装 -o 绑定 /jffs/opt /opt但在那之后,以防万一,ls /jffs/没有向我展示任何内容,并且/选择输入后不显示在任何地方df杰夫斯选择当我进入时出现ls /

请提及我可能错过的任何重要内容。难道是硬件规格不够?

相关内容