☰

外部驱动器从 /dev/sda 切换到 /dev/sdb

tag-icon • tag-icon hard-drive mount usb fstab
外部驱动器从 /dev/sda 切换到 /dev/sdb

我们有一个小盒子，里面连接着外部驱动器，用于备份配置集。我发现问题很简单，就是在重新启动或发生任何未知事件时，驱动器会从 切换/dev/sda1到/dev/sdb1。

我该如何避免这个问题或者配置 fstab 来尝试两个位置？

/dev/sda1       /stor           ext4    defaults,noatime,noexec  0       0

您可以看到我做了相当多的调试：

root@nsa:~# mount /stor
mount: special device /dev/sda1 does not exist

正如您在下面看到的，我在写这个问题时做了相当多的调试。

系统日志：

Jul 16 09:48:48 nsa kernel: [167416.395274] EXT4-fs warning (device sda1): 
         __ext4_read_dirblock:908: error reading directory block (ino 2, block 0)

#df -h前umount：

/dev/sda1       1.4T  185G  1.1T  15% /stor

#dmesg：

[   170.431715] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[119366.019470] usb 1-1.2: USB disconnect, device number 4
[119366.297601] usb 1-1.2: new high-speed USB device number 6 using dwc_otg
[119366.398979] usb 1-1.2: New USB device found, idVendor=1058, idProduct=1021
[119366.399013] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[119366.399029] usb 1-1.2: Product: Ext HDD 1021
[119366.399047] usb 1-1.2: Manufacturer: Western Digital
[119366.399063] usb 1-1.2: SerialNumber: 5743415A4132343133343334
[119366.400719] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[119366.403826] scsi1 : usb-storage 1-1.2:1.0
[119367.398875] scsi 1:0:0:0: Direct-Access     WD       Ext HDD 1021     2002 PQ: 0 ANSI: 4
[119367.401608] sd 1:0:0:0: Attached scsi generic sg0 type 0
[119367.402505] sd 1:0:0:0: [sdb] 2930272256 512-byte logical blocks: (1.50 TB/1.36 TiB)
[119367.403524] sd 1:0:0:0: [sdb] Test WP failed, assume Write Enabled
[119367.404593] sd 1:0:0:0: [sdb] Asking for cache data failed
[119367.404623] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[119367.407157] sd 1:0:0:0: [sdb] Test WP failed, assume Write Enabled
[119367.410142] sd 1:0:0:0: [sdb] Asking for cache data failed
[119367.410185] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[119374.143786]  sdb: sdb1
[119374.146995] sd 1:0:0:0: [sdb] Test WP failed, assume Write Enabled
[119374.149166] sd 1:0:0:0: [sdb] Asking for cache data failed
[119374.149203] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[119374.149231] sd 1:0:0:0: [sdb] Attached SCSI disk
[153689.349544] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #2: comm rsync: reading directory lblock 0

#lsusb：

Bus 001 Device 006: ID 1058:1021 Western Digital Technologies, Inc. Elements 2TB

答案1

正如评论中提到的，获取磁盘的 UUID 并将其粘贴到您的 fstab 中；

UUID=66a7ba58-b1e2-4d91-9b5e-085064a954ab /stor ext4 defaults 0 0

（将 UUID 值替换为您自己的值）。很简单ls -la /dev/disk/by-uuid（这只是一组名为磁盘 UUID 的符号链接，指向真实设备的标识符（sda、sdb 等）。就我而言；

lrwxrwxrwx 1 root root 9 Jul 7 08:45 66a7ba58-b1e2-4d91-9b5e-085064a954ab -> ../../sdf

具有该 UUID 的磁盘是 /dev/sdf，但我不需要知道这一点。设备的位置可能会、将会并且确实会发生变化。它的 UUID 嵌入到文件系统的目录中，除非您将其格式化为干净的，否则它永远不会改变。

相关内容