我有一台运行 Solaris 10 的 Dell PowerEdge 2950,有 8 个驱动器。我想将一些驱动器换成新的。目前我的问题是,我只看到其中一半,而其他 4 个似乎没有任何迹象。
服务器信息 -
# cat /etc/release
Solaris 10 5/09 s10x_u7wos_08 X86
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 30 March 2009
cfgadm 输出 -
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 disk connected configured unknown
c0::dsk/c0t1d0 disk connected configured unknown
c0::dsk/c0t2d0 disk connected configured unknown
c0::dsk/c0t3d0 disk connected configured unknown
usb0/1 unknown empty unconfigured ok
usb0/2 unknown empty unconfigured ok
usb1/1 unknown empty unconfigured ok
usb1/2 unknown empty unconfigured ok
usb2/1 unknown empty unconfigured ok
usb2/2 unknown empty unconfigured ok
usb3/1 unknown empty unconfigured ok
usb3/2 unknown empty unconfigured ok
usb4/1 unknown empty unconfigured ok
usb4/2 unknown empty unconfigured ok
usb4/3 unknown empty unconfigured ok
usb4/4 unknown empty unconfigured ok
usb4/5 usb-hub connected configured ok
usb4/5.1 unknown empty unconfigured ok
usb4/5.2 unknown empty unconfigured ok
usb4/5.3 unknown empty unconfigured ok
usb4/5.4 unknown empty unconfigured ok
usb4/6 unknown empty unconfigured ok
usb4/7 unknown empty unconfigured ok
usb4/8 unknown empty unconfigured ok
raidctl完全不输出任何内容
格式输出 -
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <DEFAULT cyl 8841 alt 2 hd 255 sec 63>
/pci@0,0/pci8086,25e3@3/pci8086,370@0/pci1028,1f03@e/sd@0,0
1. c0t1d0 <DELL-PERC 5/i-1.03-67.75GB>
/pci@0,0/pci8086,25e3@3/pci8086,370@0/pci1028,1f03@e/sd@1,0
2. c0t2d0 <DELL-PERC 5/i-1.03-67.75GB>
/pci@0,0/pci8086,25e3@3/pci8086,370@0/pci1028,1f03@e/sd@2,0
3. c0t3d0 <DELL-PERC 5/i-1.03-67.75GB>
/pci@0,0/pci8086,25e3@3/pci8086,370@0/pci1028,1f03@e/sd@3,0
Specify disk (enter its number): ^C
答案1
您需要首先使用 MegaCLI 或 MegaRAID Storage Manager 管理 RAID 控制器(正如 Brian 提到的),这需要安装正确的驱动程序。Oracle 的硬件可比性列表会为您指明要使用的正确驱动程序的方向...
...但链接不好用,可能是因为硬件太旧了。不过,在 LSI 网站上快速搜索仍然可以找到所需的驱动程序和软件:
驱动程序安装可能最终会解决问题……如果没有,您将不得不使用 MegaCLI 挖掘信息以进行故障排除。而且不仅仅是让您“RTFM”,而是您将要需要阅读一些 MegaCLI 指南,了解如何获取有关该问题的相关数据。如果指南有点让人不知所措,您可以先进行一些网络搜索(例如“MegaCLI 显示所有磁盘”)。
通过评论更新有任何进展/结果吗?