ALOM 1.3.2 无法激活网络管理端口

ALOM 1.3.2 无法激活网络管理端口

我最近买了一台二手 Sun Fire T-2000 服务器。我可以使用串行端口连接到 ALOM,但无法通过网络连接。以下是我的设置:

sc> showsc
Advanced Lights Out Manager CMT v1.3.2

parameter                value
---------                -----
if_network               true
if_connection            telnet
if_emailalerts           false
netsc_dhcp               false
netsc_ipaddr             192.168.0.225
netsc_ipnetmask          255.255.255.0
netsc_ipgateway          192.168.0.1
mgt_mailhost
mgt_mailalert
sc_customerinfo
sc_escapechars           #.
sc_powerondelay          false
sc_powerstatememory      false
sc_clipasswdecho         true
sc_cliprompt             sc
sc_clitimeout            0
sc_clieventlevel         2
sc_backupuserdata        true
diag_trigger             power-on-reset error-reset
diag_verbosity           normal
diag_level               min
diag_mode                normal
sys_autorunonerror       false
sys_autorestart          reset
sys_eventlevel           2
ser_baudrate             9600
ser_parity               none
ser_stopbits             1
ser_data                 8

有了这些设置,我无法通过网络连接到 ALOM。我尝试了 ssh 和 telnet,但都不起作用。现在,在有人说 ALOM 不应连接到网络或与其他所有设备连接到同一个网络之前,这是我的家,所以我并不担心服务器的安全性。我目前在 HD 上安装了 OpenBSD。

- 编辑 -

我尝试 ping 网络端口,但无法 ping 通。我开始认为端口可能有故障。但是,我在交换机上为该端口建立了 100mbps 全双工,除非端口发生故障导致无法发送/接收帧,否则这毫无意义。

我买这台机器是因为它有一个多核 UltraSPARC 处理器。这样我就可以在大端机器上测试我的软件了。

- 编辑 -

我从 ALOM 重新运行了 VxDiags,并在下面发布了结果。

    ALOM BOOTMON v1.3.2
ALOM Build Release: 001
Reset register: 00000000

ALOM POST 1.0

Dual Port Memory Test, PASSED.

TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.

TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.

TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.

Memory Data Lines Test
Memory Data Lines Test, PASSED.

Memory Address Lines Test
  Slide address bits to test open address lines
  Test for shorted address lines
Memory Address Lines Test, PASSED.

Boot Sector FLASH CRC Test
Boot Sector FLASH CRC Test, PASSED.

Return to Boot Monitor for Handshake
ALOM POST 1.0
   Status = 00007fff

Returned from Boot Monitor and Handshake

Loading the runtime image... VxWorks running.

Starting Advanced Lights Out Manager CMT v1.3.2

Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.

Current mode: NORMAL
Attaching network interface lo0... done.
Attaching network interface motfec0.... done.
Booting from Segment 1

SC Alert: SC System booted.

Sun(tm) Advanced Lights Out Manager CMT v1.3.2

Full VxDiag Tests

BASIC TOD TEST
  Read the TOD Clock:        TUE NOV 24 04:24:21 2015
  Wait, 1 - 3 seconds
  Read the TOD Clock:        TUE NOV 24 04:24:23 2015
BASIC TOD TEST, PASSED

ETHERNET CPU LOOPBACK TEST
  50 BYTE PACKET   - a 0 in field of 1's.
  50 BYTE PACKET   - a 1 in field of 0's.
  900 BYTE PACKET  - pseudo-random data.
ETHERNET CPU LOOPBACK TEST, PASSED

Full VxDiag Tests - PASSED

    Status summary  -  Status = 7FFF

       VxDiag    -          -  PASSED
       POST      -          -  PASSED
       LOOPBACK  -          -  PASSED

       I2C       -          -  PASSED
       EPROM     -          -  PASSED
       FRU PROM  -          -  PASSED

       ETHERNET  -          -  PASSED
       MAIN CRC  -          -  PASSED
       BOOT CRC  -          -  PASSED

       TTYD      -          -  PASSED
       TTYC      -          -  PASSED
       MEMORY    -          -  PASSED
       MPC885    -          -  PASSED

Please login:

看起来所有诊断都通过了,所以我不知道该想什么。

相关内容