使用证书进行身份验证
ubuntu 16.04 + strongswan。
客户端从 win7 连接,证书已添加,如 strongswan Wiki 中所述。
配置也像在 strongswan wiki 中一样,但我收到错误:'plutostart 已弃用,因此我将其删除。
所以我的ipsec.conf
:
config setup
#plutostart=no
conn win7
left=%defaultroute
leftcert=vpnHostCert.der
leftsubnet=0.0.0.0/0
right=%any
rightsendcert=never
rightsourceip=10.42.42.0/24,2002:25f7:7489:3::/112
keyexchange=ikev2
auto=add
日志:
Jun 28 03:20:26 myserver charon: 12[IKE] IKE_SA (unnamed)[2] state change: CONNECTING => DESTROYING
Jun 28 03:20:30 myserver charon: 13[NET] received packet: from MYIP[500] to SERVERIP[500] (528 bytes)
Jun 28 03:20:30 myserver charon: 13[ENC] parsed IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) ]
Jun 28 03:20:30 myserver charon: 13[IKE] MYIP is initiating an IKE_SA
Jun 28 03:20:30 myserver charon: 13[IKE] IKE_SA (unnamed)[3] state change: CREATED => CONNECTING
Jun 28 03:20:30 myserver charon: 13[IKE] remote host is behind NAT
Jun 28 03:20:30 myserver charon: 13[ENC] generating IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(MULT_AUTH) ]
Jun 28 03:20:30 myserver charon: 13[NET] sending packet: from SERVERIP[500] to MYIP[500] (308 bytes)
Jun 28 03:21:00 myserver charon: 14[JOB] deleting half open IKE_SA after timeout
Jun 28 03:21:00 myserver charon: 14[IKE] IKE_SA (unnamed)[3] state change: CONNECTING => DESTROYING